Gewa Jupiter Bedienungsanleitung

Instructions for Gewa Jupiter

2 (20)

INTRODUCTION.........................................................................................................................3

BENEFITS AND FEATURES OF GEWA JUPITER.................................................................................3

CONNECTION AND DESCRIPTION ....................................................................................... 4

CONNECTING JUPITER ...................................................................................................................4

JUPITER’S KEYS AND OTHER COMPONENTS....................................................................................4

PROGRAMMING DIFFERENT SETTINGS ...........................................................................6

PROGRAMME TELEPHONE NUMBERS..............................................................................................6

Programme direct dial keys M1-M8......................................................................................... 6

Programme abbreviated numbers K10-K49.............................................................................7

ADJUST VOLUME OF RING SIGNAL .................................................................................................7

ADJUST TONE OF RING SIGNAL ...................................................................................................... 7

KEYBOARD LOCK ..........................................................................................................................8

Programme personal code........................................................................................................8

Lock/unlock keyboard...............................................................................................................8

PROGRAMMING REMOTE-CONTROLLED FUNCTIONS ...............................................9

FUNCTION TABLE ..........................................................................................................................9

PREPARING FOR PROGRAMMING..................................................................................................12

PROGRAMMING ...........................................................................................................................12

USING JUPITER ........................................................................................................................13

RING WITH THE HANDSET............................................................................................................13

Ring normally .........................................................................................................................13

Ring last-dialled number ........................................................................................................13

Ring the second-last dialled number ...................................................................................... 13

Ring with direct dial buttons ..................................................................................................13

Ring with abbreviated numbers..............................................................................................14

RING WITH THE LOUDSPEAKER FUNCTION................................................................................... 14

ANSWER A CALL ......................................................................................................................... 14

TERMINATE A CALL.....................................................................................................................14

CHECK DIRECT DIAL NUMBERS AND ABBREVIATED NUMBERS..................................................... 14

Direct dial numbers................................................................................................................14

Abbreviated numbers..............................................................................................................14

SAVE TELEPHONE NUMBERS TEMPORARILY ................................................................................15

SWITCH BETWEEN HEADSET AND LOUDSPEAKER MODULE .......................................................... 15

LISTEN-IN ...................................................................................................................................15

ADJUST SOUND VOLUME DURING ONGOING CALL ....................................................................... 15

With headset ...........................................................................................................................15

With loudspeaking function .................................................................................................... 15

PRIVACY (MUTE) ........................................................................................................................16

ANSWER AND CALL WITH IR TRANSMITTER ................................................................................16

OTHER INFORMATION..........................................................................................................17

QUICK GUIDE SUMMARY .............................................................................................................17

BATTERY FUNCTION.................................................................................................................... 17

Check battery status ...............................................................................................................17

Change batteries.....................................................................................................................18

CLEANING................................................................................................................................... 18

APPLICATION ENVIRONMENT ...................................................................................................... 18

TECHNICAL DATA .......................................................................................................................18

DECLARATION OF CONFORMITY .....................................................................................19

3 (20)

Introduction

Gewa Jupiter is a remote-controlled loudspeaker telephone, which means that the

different keys on the telephone can be operated from an IR transmitter. Users with

disabilities do not need to lift the handset and press the keys, as the telephone can

be operated remotely from its IR transmitter. To dial a number, the number is

entered in the digital window and sent. The built-in IR receiver is used to

programme the keys that are operated from the IR transmitter. The telephone can

thus be individually adapted to the needs of a disabled user. Gewa Jupiter is part of

the Gewa Smart House system, which means that everything can be guided from

one remote control.

Benefits and features of Gewa Jupiter

•An IR transmitter that controls all the telephone’s functions

•The choice of using selected and simple functions from the IR transmitter, such

as only direct dial numbers with automatic connection.

•Free disposition of IR channels.

•Simple programming.

•Loudspeaker telephone that enables full speech communication without lifting

the handset.

•Good sound quality (good speech switchover).

•Back up batteries for power failure.

•Telephone numbers that can be built up before the line is opened.

•Character display that shows telephone number and other characters.

4 (20)

Connection and description

Connecting Jupiter

1. Place the batteries that are supplied (4 1.5 V Alk) in the correct position in the

battery compartment on the back of Jupiter. Use Alkaline batteries only.

2. Connect the battery eliminator to the contact on Jupiter and a socket outlet.

Only the battery eliminator that is supplied should be used (type: Vanson

Regulated AC/DC Adaptor 230V AC /7.5V DC).

3. Connect the supplied cord with the plug contact with the contact underneath

Jupiter and then connect the plug contact to the telephone line.

As Jupiter is approved for two-wire connection, any subsequent telephones will

be disconnected. To alleviate this problem, choose one of the following

alternatives:

•Set Jupiter in the last jack.

•Remove the white plastic pin from Jupiter’s plug contact.

•Connect the jack parallel.

4. Check that there is a tone when the handset is lifted, or the S key is pressed.

Jupiter’s keys and other components

Jupiter has 16 special keys, in addition to 0-9, # and *.

M1-M8 Direct dial keys 1-8, with memory.

Re (Redial) For redialling the last/second-last dialled number (two presses

for second-last number). When the line is opened with the S key, the

number is dialled.

R Register button, used for different AXE services.

P Programming key, used to programme the telephone’s different

functions.

—Pause, and function for recalling abbreviated numbers

S(Speaker) Connection, i.e. answer/terminate via the loud speaking

function. If the saved number is already in the character display, it is

sent when the S key is pressed.

Increases the sound volume in the loudspeaker/handset.

Reduces the sound volume in the loudspeaker/handset.

M (Mute) Privacy, turns off Jupiter’s microphone.

5 (20)

Contact for connecting the cord

with the telephone jack with the

telephone line (underneath

Jupiter)

Handset

Pause key and

abbreviated number function

(Speaker) Connection

Sound volume +/-

(Mute) Privacy

IR eye/Indicating lamp

The IR eye receives the

IR signals and should

never be hidden or

concealed

Programming key

Redial

Character display

Direct dial keys M1-M8

Connection for power

supply

6 (20)

Programming different settings

Programme telephone numbers

Using Jupiter is easy, as telephone numbers are saved in different memories. 8

telephone numbers can be saved in the direct dial keys M1-M8, and 40 telephone

numbers can be saved as abbreviated numbers in memories K10-K49. A maximum

of 20 digits and characters can be programmed into each memory.

If Jupiter is connected to an internal switch that requires a prefix, a pause must be

added between the prefix and the telephone number. This prefix could be a zero,

for example, and pressed first where after the desired number is pressed.

Pause key

On rare occasions, Jupiter can send a number that is saved on a direct dial key or as

an abbreviated number when automatic connection is used. Read more about

automatic connection in the “Programme remote-controlled functions”. To avoid

this problem, a time-delay should be added by pressing a pause before the actual

telephone number.

Time-delay=pause key

Programme direct dial keys M1-M8

1. Press P.

2. Choose and press a direct dial key M 1 - M 8 .

3. Press P.

4. Press the desired telephone number.

5. Press P.

Quick guide

Programme M1-M8: P, M 1 - M 8 , P, the desired telephone number, P.

7 (20)

Programme abbreviated numbers K10-K49

1. Press P.

2. Choose an abbreviated number by pressing a number between 10-49.

3. Press P.

4. Press the desired telephone number.

5. Press P.

Quick guide

Programme K10-K49: P, K X ,P, the desired telephone number,P.

Adjust volume of ring signal

The volume of the ring signal can be set at either high or low.

1. Lift the headset.

2. Press P.

3. Press S.

4. Press for high volume or for low volume. H or L are shown in the

character display to indicate high/low volume.

5. Replace headset.

Quick guide

High/low volume of ring signal: Lift the headset, P, S, or , replace headset.

= High volume. = Low volume.

Adjust tone of ring signal

The tone of the ring signal has four alternative settings.

1. Lift the headset.

2. Press P.

3. Press S.

4. Choose and press M 1 - M 4 to change the tone of the ring signal. d1-d4 are shown

in the character display.

5. Replace headset.

Quick guide

Adjust tone of ring signal: Lift the headset, P, S, M 1 - M 4 , replace headset.

8 (20)

Keyboard lock

The keyboard lock is used to bar outgoing calls. It is still possible to ring the

telephone numbers saved on the direct dial keys and abbreviated numbers.

Incoming call are not affected. If the keyboard is locked, a key symbol appears in

the character display. A code is needed to lock the keyboard. On delivery, the code

is 000. This can be changed to a personal code.

Programme personal code

1. Press P.

2. Press S.

3. Press 000. *** is shown in the character display. If the wrong code is pressed,

Error appears.

4. Press P.

5. Press a new three-digit code.

6. Repeat the new code

Quick guide

Programme personal code: P, S, 0, 0, 0, P, new three-digit code, repeat code.

Lock/unlock keyboard

1. Press P.

2. Press S.

3. Press personal code. *** is shown in the character display. If the wrong code is

pressed, Error appears.

4. Press *to lock or #unlock.

Quick guide

Lock/unlock keyboard: P, S, code, *or #.

*= lock. #= unlock.

9 (20)

Programming remote-controlled functions

Jupiter can be operated from an IR transmitter via a built-in IR receiver. The

desired functions and channels must be programmed in the IR receiver.

Function table

Tables 1 and 2 show the different functions/alternatives that are operable from an

IR transmitter. Please observe the following:

•Only R, Re, P and with/without automatic connection differ from alternatives 1-

•Alternatives 5-6 are reserved for future applications.

•Alternative 7 is the simplest alternative with only direct dial /abbreviated

numbers and automatic connection.

•Automatic connection means that when the keyboard is pressed from the IR

transmitter, Jupiter rings a direct dial/abbreviated number and the line is opened

automatically.

•Check the table to see which IR transmitter is most appropriate for the different

alternatives. Only IR transmitters from Gewa AB can be used.

•The factory setting for Jupiter = Channel 16 on the first key, alternative 3 and

group 4.

•When programming Jupiter, choose the alternative and the number of functions

in the alternative that are to be accessed from the IR transmitter. For example, if

group 5 in alternative 1 is chosen, all functions in groups 1 to 5 are accessible;

if group 8 in the same alternative is chosen, the maximum number of functions

is accessible, i.e. groups 1 to 8.

•In alternatives 1-4, at least group 4 must be chosen.

10 (20)

Table 1

Only IR transmitters IR 17SO, IR 17SP and Gewa Prog III are suitable for the following

alternatives.

Group Key on

transmitte

Alt. 1

Without automatic

connection on

M 1- M8, but with

automatic

connection on

K10-K11.

Alt. 2

Without automatic

connection on

M 1- M8 but with

automatic

connection on

K10-K11.

Alt. 3

With automatic

connection on

M 1- M8 and

K10-K11.

Alt. 4

With automatic

connection on

M 1- M8 and

K10-K11.

1 1 1 1 1

Grp 1 2 2 2 2 2

3 3 3 3 3

4 4 4 4 4

5 5 5 5 5

Grp 2 6 6 6 6 6

7 7 7 7 7

8 8 8 8 8

9 9 9 9 9

Grp 3 0 0 0 0 0

* * * * *

# # # # #

A S S S S

Grp 4 B Re R Re R

C — — — —

D M 1 M 1 M 1 M 1

1 M 2 M 2 M 2 M 2

Grp 5 2 M 3 M 3 M 3 M 3

3 M 4 M 4 M 4 M 4

4 M 5 M 5 M 5 M 5

5 M 6 M 6 M 6 M 6

Grp 6 6 M 7 M 7 M 7 M 7

7 M 8 M 8 M 8 M 8

8 K 10 K 10 K 10 K 10

9 K 11 K 11 K 11 K 11

Grp 7 0 R R R R

* V- V- V- V-

# V+ V+ V+ V+

A S S S S

Grp 8 B P P —————— —————

C M M M M

D M 1 M 1 M 1 M 1

Inhaltsverzeichnis

Andere Gewa Telefon Handbücher

Gewa

Gewa GewaTel 200 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung