GFA ELEKTROMAT SE 9.24-25,40 Ex Bedienungsanleitung

Installation Instructions

ELEKTROMAT

SE 9.24-25,40 Ex

Model: 10002595 00001

-en-

Status: 22.11.2019

GfA ELEKTROMATEN GmbH & Co. KG

Wiesenstraße 81

D-40549 Düsseldorf

www.gfa-elektromaten.de

[email protected]

Table of contents

1General safety information .............................................................................................. 4

2Technical data of the drive unit ....................................................................................... 5

3Technical data of the gearbox ......................................................................................... 6

4Technical data of the motor ............................................................................................. 7

5Technical data of the terminal box ................................................................................... 8

6Technical data of limit switch / emergency manual operation switch ............................... 8

7Mechanical installation .................................................................................................... 9

8Electrical installation ..................................................................................................... 13

9Limit switch setting ........................................................................................................ 15

10Connection of the motor ................................................................................................ 17

11Limit switch connection ................................................................................................. 17

12Emergency manual operation (emergency hand crank) ................................................ 18

13Completion of initial operation / inspection / operation ................................................... 20

14Declaration of conformity, Motor .................................................................................... 24

15Declaration of conformity, Accessories .......................................................................... 28

16Declaration of incorporation / Declaration of conformity ................................................. 30



Symbols

Warning - Potential injury or danger to life!

Warning - Danger to life from electric current!

Note - Important information!

▶ Requirement - Required action!

Schematic representations are based on product examples. Deviations from delivered

products are possible.

1General safety information

Specified normal use

The drive unit is intended for sectional doors with full counter-balancing.

In compliance with its explosion protection according to ATEX 2014/34/EU, it may be used in

explosive areas.

The safe operation is only guaranteed with specified normal use. The drive unit is to be

protected from rain, moisture and aggressive ambient conditions. No liability for damage

caused by other applications or non-observance of the information in the manual.

Modifications are only permitted with the agreement of the manufacturer. Otherwise the

Manufacturer’s Declaration shall be rendered null and void.

Safety information

Installation and initial operation tasks are to be performed by skilled personnel only.

Only trained electrical craftsmen are permitted to work on electrical equipment. They must

assess the tasks assigned to them, recognise potential danger zones and be able to take

appropriate safety measures.

Installation work is only to be carried out with the supply off and in a non-explosive

atmosphere.

Observe the applicable regulations and standards.

Documentation

The drive unit consists of components according to ATEX 2014/34/EU which are reliably

assembled. The documentation refers to the safe installation and operation of the drive unit.

It only quotes excerpts from the original documentation of the components. Should you have

any questions, please contact the manufacturer of the component.

Coverings and protective devices

Do not operate unless corresponding coverings and protective devices are installed.

Ensure that gaskets are fitted correctly and that cable glands are correctly tightened.

Spare parts

Only use original spare parts.

2Technical data of the drive unit

Explosion protection II 2G Ex db eb ib h IIC T3 Gb

II 2D Ex tb h IIIC 190°C Db

Output torque 90 Nm

Output speed 24 rpm

Output / hollow shaft 25,40 mm

Maximum holding torque 450 Nm

Maximum door weight 4000 N

Supply voltage 3~ 400 V

Operating current 1,11 A

Operating frequency 50 Hz

Power factor cos φ 0,69

Maximum movements per hour 20 h-1

Protection class IP 65

Limit switch range

(maximum revolutions of the output / hollow shaft) 20

Temperature range -10 / +40 °C

Installation height < 1000 m

Components used

Gearbox SG 50 60.T4

Motor U/ENFY 71/4C-11S

Terminal box 8146/1041

Limit switch / emergency manual operation switch 07-2511

3Technical data of the gearbox

Series SG 50-60.T4

Manufacturer GfA

Explosion protection II 2G Ex h IIC T4 Gb

II 2D Ex h IIIC 130°C Db

Max. output torque 90 Nm

Max. output speed 30 rpm

Shaft centre distance 50 mm

Transmission ratio 1:60

Temperature range -10 / +40 °C

Protection class IP 65

4Technical data of the motor

Type U/ENFY 71/4C-11S

Manufacturer ATB Austria

Explosion protection II 2G Ex e IIC T4 Gb

II 2D Ex tb IIIC T 120°C Db

Certificate of verification PTB 01 ATEX 3221/24

PTB 01 ATEX 3221/25

Supply voltage 230 / 400 +/- 5% V

Operating current 1,92 /1,11 A

Operating frequency 50 Hz

Power 0,37 kW

Power factor cos φ 0,69

Motor speed 1410 rpm

Motor torque 2,5 Nm

Operating mode S1

Protection class IP 65

Temperature class (G)

Temperature class (D) T3 / T4

T 120

°C

Heating time tE (G)

Heating time tE (D) 30 / 16

50 s

IA / IN ratio 4,8

Temperature range -20 / +40 °C

5Technical data of the terminal box

Type Ex e 8146/1041

Manufacturer Stahl

Explosion protection II 2G Ex e II T6

II 2D Ex tD A21 IP 66 T80°C

Certificate of verification PTB 01 ATEX 1016

Supply voltage 250 max. 1100 V

Terminal cross-section 2.5 mm2

Temperature range T6: -20 / +40

T5: -20 / +55 °C

Protection class IP 66

6Technical data of limit switch / emergency manual operation switch

Type 07-2511-113061G

Manufacturer Bartec

Explosion protection II 2G Ex d IIC T6

II 2D Ex tD A21 IP 66 T80°C

Certificate of verification EPS 14 ATEX 1766 X

Supply voltage 400 V

Temperature range -20 / +40 °C

Protection class IP 66

Attention – Damage to components!

The maximum allowable current applied to the limit switches is

2A 400V for AC-15 and 0.15 250V for DC-13.

7Mechanical installation

Warning – Explosion hazard!



Check the atmosphere for explosion hazards before commencing installation tasks.

Requirements

The permissible loads on walls, mountings, connection and transmission elements must not

be exceeded even for maximum holding or locking torque (▶ observe technical data).

Connection elements:

▶ Use self-locking

connection elements with

a minimum strength of

800 N/mm2 (8.8).

▶ Use a screw that

precisely fits the hole.

▶ Use adequately

dimensioned washers for

elongated holes.

BAGAB00002_Z002 BAGAB00003_Z002

3 : 1

Permissible mounting positions

BAGAC01003_Z001

Mounting

8 threads are provided for mounting.

▶ Use at least 2 for mounting (①).

The shaft of the door is connected with a key.

▶ A key with the minimum length of the hollow shaft (②) is used.

8 x (M8x16)

BAGAD01002_Z001

Inhaltsverzeichnis

Andere GFA Gleichstromantrieb Handbücher

GFA

GFA SI 25.15-30,00 Bedienungsanleitung

GFA

GFA 10003900 10011 Bedienungsanleitung

GFA

GFA ELEKTROMAT SI 75.24-55,00 Bedienungsanleitung

GFA

GFA ELEKTROMAT SG 85 Bedienungsanleitung

GFA

GFA ELEKTROMAT SI 5.250 FU-25,40 Bedienungsanleitung

GFA

GFA SIK 25.10-30,00 Bedienungsanleitung

GFA

GFA ELEKTROMAT SI 17.30 FU-30,00 Bedienungsanleitung

GFA

GFA ELEKTROMAT SI 100.30 FU-55,00 10003917 10011 Bedienungsanleitung

GFA

GFA ELEKTROMAT SI 35.15-40,00 GA35/15GD Bedienungsanleitung

GFA

GFA KE 9.24-25,00 Ex Bedienungsanleitung

GFA

GFA 10002624 10011 Bedienungsanleitung

GFA

GFA ELEKTROMAT SI 14.20-25,00 Bedienungsanleitung

GFA

GFA ELEKTROMAT SI 55.20 FU-40,00 Bedienungsanleitung

GFA

GFA ELEKTROMAT SI 40.15-40,00 Bedienungsanleitung

GFA

GFA ELEKTROMAT SI 60.55 FU-55,00 Bedienungsanleitung

GFA

GFA ELEKTROMAT SIK 25.10 WS-30,00 Bedienungsanleitung

GFA

GFA ELEKTROMAT SI 25.24-30,00 Bedienungsanleitung

GFA

GFA ELEKTROMAT SI 60.24-55,00 Bedienungsanleitung

GFA

GFA SI 40.40 FU-40,00 Bedienungsanleitung

GFA

GFA 10003672 10011 Bedienungsanleitung

GFA

GFA ELEKTROMAT SI 75.15-55,00 Bedienungsanleitung

GFA

GFA ELEKTROMAT SI 40.15-40,00 Ex Bedienungsanleitung

GFA

GFA ELEKTROMAT SI 55.15-40,00 Bedienungsanleitung

GFA

GFA ELEKTROMAT SI 35.30-40,00 Bedienungsanleitung

Beliebte Gleichstromantrieb Handbücher anderer Marken

Chamberlain Garog

Chamberlain Garog D Series Bedienungsanleitung

Parker

Parker PDS Series Bedienungsanleitung

Festo

Festo DGC G Series Einrichtungshandbuch

Binks

Binks QS-5012-1-CE Bedienungsanleitung

Danfoss

Danfoss VLT 2800 Series Technisches Datenblatt

ABB

ABB ACQ580-01 Series Installationshandbuch

YASKAWA

YASKAWA CANopen SI-S3 Bedienungsanleitung

GE D20A6 Bedienungsanleitung

Unex

Unex MC-D-250-1000-050W-TW Bedienungsanleitung

Geckodrive

Geckodrive G213V Bedienungsanleitung

ABB

ABB RSYC-01 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Betriebsanleitung

WEG

WEG DeviceNet CFW500 Bedienungsanleitung

Siemens

Siemens SINAMICS G Datenblatt

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Betriebsanleitung

SOMFY

SOMFY JR RU 30 Bedienungsanleitung

Beckhoff

Beckhoff AX8911 Bedienerhandbuch

Lenze

Lenze 8200 vector Bedienungsanleitung