GFW CANYON BOOKCASE Bedienungsanleitung

CANYON BOOKCASE WITH 2 DRAWERS

ASSEMBLY INSTRUCTIONS

IMPORTANT

PLEASE READ BEFORE YOU CONTINUE FURTHER

WARNING AND INSTRUCTIONS

GENERIC

IMPORTANT: RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

•

DUE TO THE SIZE OF THIS PRODUCT WE RECOMMEND THAT IT IS ASSEMBLED IN THE

•

ROOM INTENDED FOR USE.

WHEN YOU ARE READY TO START,MAKE SURE THAT YOU HAVE THE RIGHT TOOLS,

•

PLENTY OF SPACE AND A CLEAN, DRY AREA FOR ASSEMBLY.

UNWRAP ALL PACKAGING MATERIALS AND PLACE THE COMPONENTS ON TOP OF

•

THE CARTON BOX OR ON A CLEAN FLOOR TO PREVENT IT FROM SCRATCHING.

CHECK THE PACK AND MAKE SURE YOU HAVE ALL THE PARTS LISTED.

•

ENSURE THAT THIS PRODUCT IS FULLY ASSEMBLED AS ILLUSTRATED BEFORE USE.

•

TOOLS NOT INCLUDED.

•

CHECK ALL SCREWS OR BOLTS ARE TIGHTENED AND INSPECT REGULARLY.

•

THIS PRODUCT SHOULD ONLY BE USED ON FIRM,LEVEL GROUND.

•

KEEP SMALL PART OUT OF REACH OF CHILDREN.

•

MAKE SURE THE LEGS REMAIN IN CONTACT WITH THE GROUND.

•

DO NOT USE POWER TOOLS TO CONSTRUCT THIS PRODUCT.

•

DO NOT TIGHTEN SCREWS UNTIL FULLY ASSEMBLED.

•

DO NOT OVER TIGHTEN SCREWS OR BOLTS.

•

DO NOT USE THIS PRODUCT IF PARTS ARE MISSING, DAMAGE OR WORN.

•

DO NOT SIT AND STAND ON THE PRODUCT.

•

TO CLEAN WIPE WITH A SPONGE AND WARM SOAPY WATER.DO NOT USE SOLVENT

•

BASED CLEANERS OR DETERGENTS AS THEY CAN BLEACH OR DAMAGE THE PRODUCT.

NEVER USE SCOURERS, ABRASIVES OR CHEMICAL CLEANERS.

•

PAGE 1 OF 12

(Screwdriver not provided)

Use a flat blade screwdriver to

tighten the cam nuts.A quarter

turn clockwise is all that is needed.

This is how a cam nut works...

The head of the bolt goes into the wide mouth of the cam nut.

You then turn the nut so the narrow part closes over the bolt.

TWO PERSONS REQUIRED TO ASSEMBLE THIS PRODUCT

1.Please check that you have all the parts listed before you start

assembling.If you do find that something is missing,do not continue

assembly.Please contact your supplier immediately.

2. Lay out all of the components on a soft surface as if you were preparing

to do a jigsaw puzzle.

3. Separate and identify each component from the hardware pack and rest

each one in its proper location before fastening.

PAGE 2 OF 12

2422 23

BOTTOM BACK PANEL

2 PCS

BACK PLINTH

1 PC

LEFT SIDE PANEL

1 PC

FRONT RIGHT PANEL

1 PC

LEFT RIGHT PANEL

1 PC

BACK PANEL

2 PCS

TOP FRONT PLINTH

1 PC

TOP RIGHT PLINTH

1 PC

TOP LEFT PLINTH

1 PC

15x12 MM CAM NUT

20 PCS

6.5x36.5 MM CAM BOLT

20 PCS

18x5 MM MINIFIX COVER CAP

20 PCS

8x32 MM DOWEL

16 PCS

13x25 MM SCREW

16 PCS

14.5x19.5 MM NAILS

8 PCS

4 MM ALLEN KEYS 1 PC

PAGE 3 OF 12

HARDWARE LIST

PARTS LIST

THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE

ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE

BOTTOM PANEL

1 PC

FRONT MIDDLE RIGHT PANEL

1 PC

BACK PLINTH HEAD DRAWER

1 PC

FRONT MIDDLE LEFT PANEL

1 PC

BACK MIDDLE RIGHT PANEL

1 PC

BACK MIDDLE LEFT PANEL

1 PC

TOP DRAWER PANEL

1 PC

RIGHT SIDE PANEL

1 PC

BOTTOM PLINTH

2 PCS

TOP PANEL

1 PC

BACK DRAWER

2 PCS

RIGHT SIDE DRAWER

2 PCS

LEFT SIDE DRAWER

2 PCS

BOTTOM DRAWER

2 PCS

BOTTOM HEAD DRAWER

1 PC

TOP HEAD DRAWER

1 PC

SHELF PANEL

2 PCS

15x12 MM CAM NUT

32 PCS

6.5x36.5 MM CAM BOLT

32 PCS

18x5 MM COVER CAP

32 PCS

8x32 MM DOWEL

77 PCS

5x12 MM SHELF SUPPORT

8 PCS

14.5x19.5 MM NAILS

4 PCS

2 PCS

14x13x9 MM STOPER

20 PCS

5x16 MM SCREW

22 PCS

PAGE 4 OF 12

PARTS LIST

THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE

ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE

HARDWARE LIST

L=350 MM OUTSIDE LEFT DRAWER

RUNNERS

2 PCS

L=350 MM INSIDE RIGHT DRAWER

RUNNERS

L=350 MM INSIDE LEFT DRAWER

RUNNERS

L=350 MM OUTSIDE RIGHT DRAWER

RUNNERS

BOTTOM PLINTH DRAWER

2 PCS

7x32 MM SCREW

4 PCS

13x25 MM SCREW

6 PCS

6x13 MM SCREW

16 PCS

ALLEN KEY

1 PCS

L=1190 MM SPACER

1 PC

L=468 MM SPACER

1 PC

5 MM WASHER

2 PCS

195x25x2 MM SAFETY BELT

2 PCS

Arrow to point in

the direction of

the hole

When inserting the cam nuts, rotate the cam nuts so the arrow points

towards the incoming cam bolts.Then you put on the minifix cover cap up the cam

8 PCS

YOU WILL NEED :YOU WILL NEED :

THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE

ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE

STEP 2

STEP 1

PAGE 5 OF 12

16 PCS

8 PCS

Insert dowels (D) into pre-drilled holes then insert to panel (1).

Insert cam nuts (A) into pre-drilled holes and rotate the cam nuts (A) so that the

arrow

points towards the inserted cam bolt (B).Use flat head screwdriver to tighten

the cam

nuts (A).

Arrow to point in

the direction of

the hole

1 PC

10 PCS

YOU WILL NEED :YOU WILL NEED :

THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE

ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE

STEP 4

STEP 3

PAGE 6 OF 12

4 PCS

2 PCS

Insert dowels (D) into pre-drilled holes and attach to panel (1).

Insert cam nuts (A) into pre-drilled holes and rotate the cam nut (A) so that the arrow

points towards the inserted cam bolt (B).Use flat head screwdriver to tighten the cam

nuts (A).Push through the spacer (R) into the middle of the back panel.

Arrow to point in

the direction of

the hole

Arrow to point in

the direction of

the hole

6 PCS

YOU WILL NEED :YOU WILL NEED :

THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE

ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE

STEP 6

STEP 5

PAGE 7 OF 12

4 PCS

3 PCS4 PCS

2 PCS

6 PCS

5 PCS

2 PCS

4 PCS

Insert cam nuts (A) into pre-drilled holes and rotate the cam nut (A) so that the arrow

points towards the inserted cam bolt (B).Use flat head screwdriver to tighten the cam

nuts (A).Cover the cam nut (A) with the cover caps (C) gently.

Insert cam nuts (A) into pre-drilled holes and rotate the cam nut (A) so that the arrow

points towards the inserted cam bolt (B).Use flat head screwdriver to tighten the cam

nuts (A).Cover the cam nut (A) with the cover caps (C) gently.

65.7163

BBBB

B B BB

1 PC

12 PCS12 PCS

PAGE 8 OF 12

STEP 7 STEP 8

THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE

ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE

YOU WILL NEED YOU WILL NEED

2 PCS

8 PCS

2 PCS

Insert cam bolt (B) into pre-drilled holes and fix with screwdriver.Use flat head

screwdriver to tighten cam nuts (A).Cover the cam nuts (A) with the cover caps (C)

gently.

Push through the spacer (Q) into the middle of the second back panel.Fix the outside

right drawer runners (G) and outside left drawer runners (H) with screw (O) and

tighten

with screwdriver.

Arrow to point in

the direction of

the hole

6 PCS6 PCS

2 PCS

8 PCS

PAGE 9 OF 12

STEP 9

STEP 10

THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE

ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE

Insert cam bolt (B) into pre-drilled hole and fix with screwdriver.Use flat head

screwdriver to tighten cam nuts (A).Cover the cam nuts (A) with the cover caps (C)

gently.

YOU WILL NEED YOU WILL NEED

7 PCS

6 PCS

1 PC

Insert cam nuts (A) into pre-drilled holes and rotate the cam nut (A) so that the arrow

points towards the inserted cam bolt (B).Use flat head screwdriver to tighten the cam

nuts (A).Cover the cam nut (A) with the cover caps (C) gently.Insert the screw (O)

into the pre-drilled hole then tighten with Allen key (P).

4 PCS

YOU WILL NEED

2 PCS

4 PCS

2 PCS

24 PCS

8 PCS

2421

Arrow to point in

the direction of

the hole

Insert the shelf support (E) into the desired pre-drilled holes then Insert shelf panels

and drawer into the unit.

Insert cam nuts (A) into pre-drilled holes and rotate the cam nut (A) so that the arrow

points towards the incoming cam bolt (B).Use flat head screwdriver to tighten the cam

nuts (A).Cover the cam nut (A) with cover caps (C) gently.

THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE

ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE

STEP 12STEP 11

PAGE 10 OF 12

8 PCS

YOU WILL NEED

Inhaltsverzeichnis

Andere GFW Inneneinrichtung Handbücher

GFW

GFW JAKARTA LONG JOHN Bedienungsanleitung

GFW

GFW NEWARK TV BED Bedienungsanleitung

GFW

GFW GALICIA Bedienungsanleitung

GFW

GFW Delta Lamp Table Bedienungsanleitung

GFW

GFW HAMPTON ACACIA COFFEE TABLE Bedienungsanleitung

GFW

GFW LUCERNE OTTOMAN BED Bedienungsanleitung

GFW

GFW NORDICA STUDY DESK Bedienungsanleitung

GFW

GFW ORLEANS 4 DRAWER CHEST Bedienungsanleitung

GFW

GFW PETTINE Bedienungsanleitung

GFW

GFW OTTAWA Bedienungsanleitung

GFW

GFW GFW ORLEANS G3104 K Bedienungsanleitung

GFW

GFW KENDAL 4+3 DRAWER CHEST Bedienungsanleitung

GFW

GFW MADRID WOODEN OTTOMAN BED 3FT Bedienungsanleitung

GFW

GFW Canyon Oak Compact TV Unit Bedienungsanleitung

GFW

GFW LANCOFGRY Bedienungsanleitung

GFW

GFW Lancaster Corner TV Unit Bedienungsanleitung

GFW

GFW Ashbourne Side ottoman bed Bedienungsanleitung

GFW

GFW JASMINE GAS LIFT BED Bedienungsanleitung

GFW

GFW LOIRE 2 PLUS 3 DRAWER CHEST Bedienungsanleitung

GFW

GFW MORITZ TALL Bedienungsanleitung

GFW

GFW CANYON OAK Bedienungsanleitung

GFW

GFW Ottawa Dressing Table Stool Set Bedienungsanleitung

GFW

GFW CHICAGO BED Bedienungsanleitung

GFW

GFW AZTEC Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung