GGP ITALY SPA 102-122 Bedienungsanleitung

TONDEUSE AUTOPORTÉE

MANUEL D’UTILISATION

71505175/0

Realizzazione: EDIPROM / bergamo - PRINTED IN ITALY

GGP ITALY

SPA • Via del Lavoro, 6 • I-31033 Castelfranco Veneto (TV) ITALY

LAWN-TRACTOR

MANUEL D’UTILISATION

RASENTRAKTOR

GEBRAUCHSANWEISUNG

TRATTORINO RASAERBA

MANUALE DI ISTRUZIONI

ZITMAAIER

GEBRUIKERSHANDLEIDING

INTRODUCTION

Dear Customer,

thank you for having chosen one of our products. We hope that you will get

complete satisfaction from using your new lawn-tractor and that it will fully meet

all your expectations.

This manual has been compiled in order that you may get to know your machine

and to be able to use it safely and efficiently. Don’t forget that it forms an integral

part of the machine, so keep it handy so that it can be consulted at any time,

and pass it on to the purchaser if you resell the machine.

This new machine of yours has been designed and made in line with current reg-

ulations, and is safe and reliable if used for cutting and collecting grass exactly

following the instructions given in this manual (proper usage). Using the

machine in any other way or ignoring the instructions for safe usage, mainte-

nance and repair is considered "incorrect usage" which will invalidate the guar-

antee, and the manufacturer will decline all responsibility, placing the blame with

the user for damage or injury to himself or others in such cases.

Since the product is continually being improved, you may find slight differences

between your machine and the descriptions contained in this manual. Certain

modifications can be made to the machine without prior warning and without the

obligation to update the manual, although the essential safety and function char-

acteristics will remain unaltered. In case of any doubts, do not hesitate to con-

tact your Retailer. And now enjoy your work!

AFTER-SALES SERVICE

This manual gives all the necessary instructions for using the machine and the

basic maintenance that may be carried out by the user.

For all information not contained here, contact the Local Retailer or a Licensed

Service Centre.

If you wish, your Reitailer will be pleased to offer a maintenance programme per-

sonalised to your needs. Like this you will be able to keep your new acquisition

in peak performance, maintaining its value.

EN 1INTRODUCTION

TABLE OF CONTENTS

1. SAFETY............................................................................................................ 3

Regulations for using the machine safely

2. IDENTIFICATION OF THE MACHINE AND COMPONENTS ........................ 7

Explanations on how to identify the machine and its main components

3. UNPACKING AND ASSEMBLY ...................................................................... 9

Explanations on how to remove the packing and on how to assemble

separated parts

4. CONTROLS AND INSTRUMENTS .............................................................. 16

Position and functions of all the controls

5. HOW TO USE THE MACHINE ..................................................................... 24

Provides indications for working efficiently and safely

5.1 Safety recommendations ....................................................................... 24

5.2 Why the safety devices cut in ................................................................ 24

5.3 Preliminary operations before starting work ........................................... 26

5.4 Using the machine ................................................................................. 29

5.5 Using on slopes ...................................................................................... 38

5.6 Transporting ........................................................................................... 38

5.7 Advice on how to obtain a good cut ...................................................... 39

6. MAINTENANCE ............................................................................................ 40

All the information for maintaining the machine in peak efficiency

6.1 Safety recommendations ....................................................................... 40

6.2 Routine maintenance ............................................................................. 41

6.3 Checks and adjustments ........................................................................ 45

6.4 Dismantling and renewing parts ............................................................. 50

7. TROUBLESHOOTING .................................................................................. 53

A help in quickly resolving any problems

8. ACCESSORIES ON REQUEST .................................................................... 56

A description of the accessories available for particular types of work

9. SPECIFICATIONS ......................................................................................... 57

A summary of the main specifications of your machine

10. ALPHABETICAL INDEX ............................................................................. 58

Where informations can be found

EN 2 TABLE OF CONTENTS

1. SAFETY

1.1 HOW TO READ THE MANUAL

Some paragraphs in the manual containing information of particular importance

for safety and operation are highlighted at various levels of emphasis, and signify

the following:

or These give details or further informa-

tion on what has already been said, and aim to prevent damage to the

machine.

Non-observance will result in the risk of injury to oneself

or others.

Non-observance will result in the risk of serious injury or

death to oneself or others.

This manual describes various versions of the machine, which mainly differ in:

– type of transmission: with mechanical gear-change or with hydrostatic contin-

uous speed adjustment. The models with hydrostatic transmission can be

recognised by the word "HYDRO" on the identification label (☛ 2.1);

– the inclusion of components or accessories which may not be available in

some areas;

– special equipments fitted.

The symbol highlights all differences in usage and is followed by the indica-

tion of the version to which it refers.

The symbol “ ☛” makes a reference to another part of the manual where further

information or clarification can be found.

Whenever a reference is made to a position on the machine

“front”, “back”, “left” or “right” hand side, this is determined by facing the

direction of forward travel.

For all usage and maintenance operations on the engine or

the battery which are not described in this manual, consult the relevant manu-

IMPORTANT

NOTE

➤



!DANGER!



!WARNING!

IMPORTANTNOTE

EN 3SAFETY

1.2 SAFETY REGULATIONS

(read carefully before using the machine)

A) TRAINING

1) Read the instructions carefully. Be familiar with the controls and the proper use of

the equipment.

2) Never allow children or people unfamiliar with these instructions to use the lawn-

mower. Local regulations can restrict the age of the operator.

3) Never mow while people, especially children, or pets are nearby.

4) Keep in mind that the operator or user is responsible for accidents or hazards

occurring to other people or their property.

5) Do not carry passengers.

6) All drivers should seek and obtain professional and practical instruction. Such

instruction should emphasise:

– the need for care and concentration when working with ride-on machines;

– control of a ride-on machine sliding on a slope will not be regained by the applica-

tion of the brake. The main reasons for loss of control are:

– insufficient wheel grip;

– being driven too fast;

– inadequate braking;

– the type of machine is unsuitable for its task;

– lack of awareness of the effect of ground conditions, especially slopes;

– incorrect hitching and load distribution.

B) PREPARATION

1) While mowing, always wear substantial footwear and long trousers. Do not oper-

ate the equipment when barefoot or wearing open sandals.

2) Thoroughly inspect the area where the equipment is to be used and remove all

objects which can be thrown by the machine.

3) DANGER! Petrol is highly flammable:

– store fuel in containers specifically designed for this purpose;

– refuel outdoors only and do not smoke while refuelling;

– add fuel before starting the engine. Never remove the cap of the fuel tank or add

petrol while the engine is running or when the engine is hot;

– If petrol is spilled, do not attempt to start the engine but move the machine away

from the area of spillage and avoid creating any source of ignition until the petrol

vapours have dissipated;

– replace all fuel tank and container caps securely.

4) Replace faulty silencers.

5) Before using, always visually inspect to see that the blades, blade bolts and cutter

assembly are not worn or damaged. Replace worn or damaged blades and bolts in

sets to preserve balance.

6) On multi-bladed machines, take care as rotating one blade can cause other blades

to rotate.

C) OPERATION

1) Do not operate the engine in a confined space where dangerous carbon monoxide

fumes can collect.

2) Mow only in daylight or good artificial light.

EN 4 SAFETY

3) Before attempting to start the engine, disengage all blade attachment clutches

and shift into neutral.

4) Do not use on slopes of more than 10° (17%).

5) Remember there is no such thing as a “safe” slope. Travel on grass slopes

requires particular care. To guard against overturning:

– do not stop or start suddenly when going up or downhill;

– engage the clutch slowly and always keep the machine in gear, especially when

travelling downhill;

– machine speeds should be kept low on slopes and during tight turns;

– stay alert for humps and hollows and other hidden hazards;

– never mow across the face of the slope.

6) Use care when pulling loads or using heavy equipment:

– use only approved drawbar hitch points;

– limit loads to those you can safely control;

– do not turn sharply. Use care when reversing;

– use counterweight(s) or wheel weights when suggested in the instruction hand-

book.

7) Stop the blades rotating before crossing surfaces other than grass.

8) Never operate the machine with defective guards, or without safety protective

devices in place.

9) Do not change the engine governor settings or overspeed the engine. Operating

the engine at excessive speed can increase the hazard of personal injury.

10) Before leaving the operator’s position:

– disengage the power take-off and lower the attachments;

– change into neutral and set the parking brake;

– stop the engine and remove the key.

11) Disengage drive to attachments, stop the engine and remove the ignition key:

– before clearing blockages or unclogging chutes;

– before cleaning, checking or working on the machine;

– after striking a foreign object. Inspect the machine for damage and make repairs

before restarting and operating the equipment;

– If the machine starts to vibrate abnormally (check immediately).

12) Disengage drive to blades when transporting or not in use.

13) Stop the engine and disengage drive to the attachment:

– before refuelling;

– before removing the grass catcher.

14) Reduce the throttle setting during engine run-out and, if the engine is provided

with a shut-off valve, turn the fuel off at the conclusion of mowing.

D) MAINTENANCE AND STORAGE

1) Keep all nuts, bolts and screws tight to be sure the equipment is in safe working

condition.

2) Never store the equipment with petrol in the tank inside a building where fumes

may reach an open flame or spark.

3) Allow the engine to cool before storing in any enclosure.

4) To reduce the fire hazard, keep the engine, silencer, battery compartment and

petrol storage area free of grass, leaves, or excessive grease.

5) Check the grass catcher frequently for wear or deterioration.

6) Replace worn or damaged parts for safety.

7) If the fuel tank has to be drained, this should be done outdoors.

8) On multi-bladed machines, take care as rotating one blade can cause other blades

to rotate.

9) When the machine is to be stored or left unattended, lower the cutting deck.

EN 5SAFETY

1.3 SAFETY DECALS

Your machine must be used with care. Therefore, decals have been placed on

the machine, to remind you pictorially of the main precautions to take during

use. These decals are to be considered an integral part of the machine.

If a decal should fall off or become illegible, contact your Retailer to replace it.

Their meaning is explained below.

1.4 REGULATIONS FOR TOWING

A kit for towing a small trailer is available on request.

This accessory is to be fitted as per the instructions pro-

vided. When using, do not exceed the recommended

drawbar loads stated on the decal and follow the safety

instructions, (☛1.2, C-6).

EN 6 SAFETY

Warning: Read the Operator’s

Manual before operating this

machine.

Warning: Disconnect the igni-

tion key and read the instruc-

tions before carrying out any

repair or maintenance work.

Danger! Ejected objects: Do

not operate without either the

stone-guard or grass-catcher in

place.

Danger! Dismembet-

ment: Make sure that chil-

dren stay clear of the

machine all the time when

engine is running.

Danger! Ejected objects: Keep

bystanders away.

Danger! Machine

rollover: Do not use this

machine on slopes

greater then 10°.

Danger of cutting yourself. Blades in movement. Do not put hands or

feet near or under the opening of the cutting plate.

2. IDENTIFICATION OF THE MACHINE AND COMPONENTS

2.1 IDENTIFICATION OF THE MACHINE

The plate located near the battery hous-

ing has the essential data of each

machine.

The serial number (6) must be quoted

when you require technical assistance or

spare parts.

1. Acoustic power level accord-

ing to directive 2000/14/CE

2. Conformity mark according

to directive 98/37/EEC

3. Year of manufacture

4. Operating engine speed in r.p.m

(if indicated)

5. Type of machine

6. Serial number

7. Weight in kg

8. Name and address of

Manufacturer

9. Type of transmission (if indicated)

2.2 IDENTIFICATION OF MAIN COMPONENTS

Various main components can be seen on the machine, and these have the fol-

lowing functions:

11. Cutting deck: this is the guard enclosing the rotating blades.

EN 7IDENTIFICATION OF THE MACHINE AND COMPONENTS

Note your machine serial number here

✍

LWA

S/N

min-1

8 5 4 7

3 9 6 2 1

12. Blades: these are what cut the grass. The wings at the ends help convey

the cut grass towards the collector channel.

13. Collector channel: this is the part connecting the cutting deck to the grass-

catcher.

14. Grass-catcher: as well as collecting the grass cuttings, this is also a safety

element in that it stops any objects drawn up by the blades from being

thrown outside of the machine.

15. Stone-guard or deflector (available as optional part): this can be fitted in

place of the grass-catcher and prevents objects drawn up by the blades

from being thrown outside of the machine.

16. Engine: this moves the blades and drives the wheels. Its specifications and

regulations for use are described in a specific manual.

17. Battery: provides the energy for starting the engine. Its specifications and

regulations for use are described in a specific manual.

18. Driver seat: this is where the machine operator sits. It has a sensor for

detecting the presence of the operator which is a safety device.

19. Decals for regulations and safety: give reminders on the main provisions

for working safely, each of which is explained in chapter 1.

20. Inspection hatch: for access to make several adjustments.

EN 8 IDENTIFICATION OF THE MACHINE AND COMPONENTS

16201918

171314

1211

3. UNPACKING AND ASSEMBLY

For storage and transport reasons, some components of the machine are not

directly installed in the factory, but have to be assembled after their removal from

the packing. Final assembly is carried out by following these simple instructions.

The machine is supplied without engine oil or fuel. Before

starting up the engine, fill with oil and fuel following the instructions given in the

engine manual.

3.1 UNPACKING

When unpacking the machine, take care to gather all individual parts and fittings,

and do not damage the cutting deck when taking the machine off the base pal-

let.

The packing contents:

– the machine;

– the battery;

– the steering wheel;

– the seat;

– the grass-catcher brackets;

– the grass-catcher components;

– an envelope containing:

– the operator’s manuals and documents,

– the nuts and bolts including a pin for blocking the steering wheel,

– 2 starter keys and a spare 10 A fuse.

To prevent damaging the cutting deck when getting the

machine down from the pallet, take it to the maximum height and be very care-

ful. For hydrostatic drive models: to make it easier to get the machine off

the pallet and to move it, the drive disengage lever should be put in position

«B» (

☛

4.33).

3.2 FITTING THE STEERING WHEEL

Put the machine on a flat surface and straighten

up the front wheels. Fit the steering wheel (1)

onto the protruding shaft (2) so that the spokes

are correctly lined up.

➤

NOTE

IMPORTANT

EN 9UNPACKING AND ASSEMBLY

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere GGP ITALY SPA Rasenmäher Handbücher

GGP ITALY SPA

GGP ITALY SPA EL 340 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA EL 420 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA DM 504 Series Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA 122 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA MJ 66 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR 434 Series Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA ES/ESL 464 TR Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA 63 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA NTL 434-R Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA ML 484 TR/TR-E Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA MP 84 Series Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA 92 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA 71503820 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA 98S Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA ES/ESL 460 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA D 310 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA MJ 66 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA NT484 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR / CS 480 Series Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA E300 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA MCS 504 Series Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA EPL 424 Series Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA E300 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung