GHM LAN 3200 Merkblatt

S99_0_25_6C-03

GHM Messtechnik GmbH • Standort GREISINGER

Hans-Sachs-Str. 26 • 93128 Regenstauf •GERMANY

+49 9402 / 9383-0 +49 9402 / 9383-33 [email protected]

Configuration Manual

Gigabit Ethernet to USB converter

As of Version 2.2

LAN 3200, WLAN 3200



Read carefully before first operation!

WEEE-Reg.-Nr. DE 93889386



Consider safety instructions!



Keep for future reference!

S99_0_25_6C-03 Configuration manual LAN 3200, WLAN 3200 Seite 2 von 4

_____________________________________________________ _____________________________________________________________________________

1GENERAL NOTE......................................................................................................................................................2

2SAFETY......................................................................................................................................................................2

2.1 INTENDED USE.......................................................................................................................................................2

2.2 QUALIFIED STAFF ..................................................................................................................................................2

2.3 SAFETY SIGNS AND SYMBOLS................................................................................................................................2

2.4 SAFETY INSTRUCTIONS..........................................................................................................................................2

3PRODUCT DESCRIPTION......................................................................................................................................3

3.1 SCOPE OF SUPPLY ..................................................................................................................................................3

3.2 OPERATING AND MAINTENANCE ...........................................................................................................................3

4DRIVER INSTALLATION AND CONFIGURATION .........................................................................................3

4.1 DEVICE CONFIGURATION.......................................................................................................................................3

4.2 SELECTION OF THE DESIRED INSTALLATION .........................................................................................................4

4.2.1 Standard.........................................................................................................................................................4

4.3 WINDOWS-SERVICE...............................................................................................................................................4

1 General note

Carefully read this manual and get familiar in operating the device before using it. Keep this document in

reach for reference in case of any doubt.

2 Safety

2.1 Intended use

The LAN 3200, WLAN 3200 are exclusively suitable for: Routing an USB device connection via ethernet to a

computer. Any other use is not intended!

2.2 Qualified staff

For operating, running, maintaining and commissioning the device, the staff needs to have an adequate level

of knowledge. All instructions have to be well-understood and complied with. The manufacturer will assume

no liability or warranty in case of usage for other purpose than the intended one, ignoring this manual,

operating by unqualified staff as well as unauthorized modifications to the device.

2.3 Safety signs and symbols

Warning notices are marked in this manual as shown below:

Caution! This symbol warns of imminent danger, death, serious injuries and significant

damage to property at non-observance.

Attention! This symbol warns of possible dangers or dangerous situations which can

provoke damage to the device or environment at non-observance.

Note! This symbol point out processes which can indirectly influence operation or provoke

unforeseen reactions at non-observance.

2.4 Safety instructions

This device has been designed and tested in accordance with the safety regulations for electronic devices.

However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety measures

and special safety advises given in this manual will be adhered to when using the device.

A.3

The GHM-Messtechnik GmbH is not liable for incorrect choice, mounting,

configuration or connection and any result obtained from this!

S99_0_25_6C-03 Configuration manual LAN 3200, WLAN 3200 Seite 3 von 4

_____________________________________________________ _____________________________________________________________________________

A.4

This device must not be used at potentially explosive areas! The usage of this

device at potentially explosive areas increases danger of deflagration, explosion or

fire due sparking.

A.5

Do not use this product as safety or emergency stop device or in any other

application where failure of the product could result in personal injury or material

damage.

Failure to comply with these instructions could result in death or serious injury and

material damage.

A.8

Only use the shipped power supply for this device.

B.1

When transporting the device from a colder to a warmer ambience condensation

may cause a malfunction. In that case, before operating, it is needed to wait until the

device temperature has aligned to the ambience.

B.3

The conceptual design, particularly when connecting with other devices has to be

done thoroughly.

Internal connections of other devices (e.g. from ground with protective earth)

may lead to prohibited voltage levels that could disturb the function, damage or

even destruct the device or any connected equipment.

Never run the device with a damaged or faulty power supply.

Risk of death by electrocution!

C.5

Whenever there may be a risk whatsoever involved in running it, the device has to be

switched off immediately and to be marked accordingly to avoid re-starting. Operator

safety may be a risk if:

- there is visible damage to the device

- the device is not working as specified

- the device has been stored under unsuitable conditions for a longer time

In case of doubt, please return device to manufacturer for repair or maintenance (with

costs).

3 Product description

3.1 Scope of supply

LAN 3200, WLAN 3200 with power supply

Manual

USB adapter

CD with freeware and drivers (GHM Messtechnik GmbH –Site GREISINGER)

CD with drivers (LAN 3200, WLAN 3200)

CD with drivers (USB adapter)

3.2 Operating and maintenance

Treat device and sensor carefully. Use only in accordance with above specification.

(Do not throw, hit against etc.). Protect plug and socket from soiling.

Supply connection / Mains operation:

When connecting a mains cable, please take care to connect only allowed

components. Carefully check the polarity and the correct connection.

Don’t apply overvoltage!

The device contains no serviceable parts inside. In case of errors or malfunction

please return device to manufacturer for repair or maintenance (with costs).

4 Driver installation and configuration

4.1 Device configuration

The IP address will be assigned through DHCP. After the valid DHCP process the device is available in the

LAN. The drivers will automatically find all devices connected to the LAN with valid IP addresses.

When a static IP is desired, the tool “Device Server Setup”from the drivers CD has to be run. Here the

static IP address can be assigned.

S99_0_25_6C-03 Configuration manual LAN 3200, WLAN 3200 Seite 4 von 4

_____________________________________________________ _____________________________________________________________________________

4.2 Selection of the desired installation

The LAN 3200 has two different connection types:

Standard

Windows-Service

4.2.1 Standard

Here the connection to a device is done manually by a program. This is when more persons and different

PCs will connect to an EASYBus or to GMH handheld

devices.

Use the driver „SX Virtual Link“ from the freeware and

drivers CD

The program will show you all devices available in the LAN.

Under the LAN 3200 the USB devices are shown. Via right

click in the context menu these USB devices can be

connected to the local PC, if there are any devices already

connected to other PCs this will also be shown. The USB

devices are connected as long as the program is running.

4.3 Windows-Service

This will connect automatically when windows starts up (no

This is the preferred connection for software like

EASYControl net, virtual systems or servers.

Use the driver „SX Virtual Link Lite“ from the freeware and

drivers CD

The program will show you all devices available in the LAN.

Under the LAN 3200 the USB devices are shown. When

checking the checkbox the selected USB device will be

connected to the PC, whenever the PC is running windows.

After a restart, this device will be reconnected automatically.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere GHM Medienkonverter Handbücher

GHM

GHM GREISINGER USB 5200 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung