Gigabyte GM-R04 Bedienungsanleitung
User’s Manual
Model(s): GM-R04
www.gigabyte.com.tw
GM-R04GamingMouse
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TOTHE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Federal Communications Commission Requirements
The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction, may cause harmful interference to radio communication. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
zReorient of relocate the receiving antenna.
zIncrease the separation between the equipment and receiver.
zConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
zConsult the dealer or an experienced radio/TV technician for help.
THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1). this device may not cause harmful interference, and
(2). this device must accept any interference received, including interference that may cause undesired operation.
HOW TO CONNECT YOUR MOUSE
1. Locate an available USB mouse port on the back of your computer.
2. Insert the USB mouse connector into the USB port .
If you like to use the PS2 port (for the round PS/2 plug), you will need to plug the
USB connector with a PS2 adapter.
HOW TO CHANGE THE DPI SETTING OF SPEED GAME MOUSE
Click the button shown on the right figure to quickly shift
from 600-800-1200-1600-2000 DPI as the scroll wheel
changes color between shifts. You don’t need any driver
for this fabulous function!
MODEL: GM-R04
At Resolution: Scrolling Wheel
will change to:
Recommend for: Suitable for Resolution of display
(Recommend)
600DPI Non Slow-Speed and normal accuracy player 800×600
800DPI Green Medium-Speed and required average accuracy player 1024×768
1200DPI Yellow Fast Speed and required above average accuracy player 1152×864
1600DPI Red High-Speed and required pinpoint accuracy player 1280×960
2000DPI Red & Yellow
coruscating
Extra High-Speed and required pinpoint accuracy player 1280×1024
Click 6th key to quickly shift from 600, 800, 1200, 1600 to as high as 2000 DPI
STEP ONE: HOW TO INSTALL GM-R04 SOFTWARE
***** For Windows Me / 2000 / 2003 / XP
1. MUST: Please uninstall any previous mouse driver before installing the GM-R04 sofeware
2. MUST: Make sure you have completely finished setting up your
mouse pad and mouse
3. Insert the included Compact Disc (CD) into your CD-ROM
4. Select “Driver” folder. Click “Setup” to install software
5. Click the button on the right to install driver
6. Follow the on screen instruction to complete your installation
7. Restart your computer after the driver has been installed
8. You will see a mouse icon “ ” appear on the bottom right
of your task bar (near the clock area)
9. Double click on the mouse icon “ ” will bring you the mouse property (Image - Top: Mouse Properties Window)
10. If the mouse image appears in the mouse properties menu looks exactly the same as the mouse on hand, then you
have successfully installed the GM-R04 driver
Mouse Properties Window
STEP TWO: HOW TO PROGRAM YOUR MOUSE BUTTONS
MOUSE PROPERTY
zOpen your Mouse Properties.
FirstTab: Button
Section I: Button Assignment
1. The mouse image that appears in the first section is a key to numbers
listed to the right. For example, button #1 has been assigned as “Main
Button” by default and it’s not programmable.
2. The rest of the buttons from #2 to # 5are programmable.
Section II: Double-Click Speed Section III: Button Configuration
Adjust your double-click speed If you select “Left-Handed”, your
Main Button will be #2 button.
Keyboard Property
Before we go further to setting up your mouse buttons with game commands,
we want to make sure your keyboard properties has the character repeat
setting correct. Follow the steps below to get to Keyboard Properties:
1) Go to Control Panel
2) Click on Keyboard
3) For Repeat Delay: Most right (SHORT)
4) For Repeat Rate: Most right (FAST)
5) Apply >> OK
STEP THREE: HOW TO SET SMART-JUMP FUNCTION
( LEARN TO SIMULATE KEYBOARD’S COMMANDS AND PROGRAM XY SENSITIVITY INDEPENDENTLY)
The function GM-R04 software not only provides program XY
sensitivity independently, but also can be set in any of the buttons
from # 2 to # 5 of simulation functions for the keyboard and half of
the mouse button simulation functions for the keyboard.
1. Double click on the mouse icon “ ” will bring you the mouse
property. (image A )
2. One Click on Smart jump and you’ll see the pop up window ( image
B)
Here you will see 2 Parts:
zPart One is Change Mouse DPI.
zPart Two is Keystrokes.
Let’s enjoy all the innovative features of the mouse step by step as
follows :
image A
image B
Section I: Change Mouse DPI ：Set mouse XY axis sensitivity levels
In order to Shift from pixel-precise targeting to fast-twitch maneuvers, without stopping the action. This
avoids the error in operation for more efficiency. You can configure your mouse as synchronism or
non-synchronism higher/lower with many parameters to control the X/Y dpi by yourself in this Smart -Jump
Software ,
Model At Resolution: LED of Scrolling Wheel Confirmable range of X/Y axes by software
600DPI Non 200DPI-600DPI
800DPI Green 200DPI-800DPI
1200DPI Yellow 200DPI-1200DPI
1600DPI Red 200DPI-1600DPI
GM-R04
2000DPI Red & Yellow coruscating 200DPI-2000DPI
If to cancel this mode, just click the 6th button, it will automatically change to the next light status, if you need
the dpi amount prior to usage, just click “Utilize mouse sensitivity configuration” mode and apply “V”.
Section II: Keystrokes
To ADD keystrokes: Click on the button “New Keystroke” and you’ll see
a “Keystroke” Window pops up (Image: left, bottom)
Here you will see 2radio buttons:
zPress and hold will input keystrokes consecutively
zPress and hold will only input once the keystrokes
If you select the 1st radio button, it means you would like to have the mouse
completely simulate the keyboard’s keystroke – when you press and hold a
key on the keyboard, it will input a character consecutively.
If you select the 2nd radio button, it means you would like to have the mouse
partially simulate keyboard’s keystroke – when you press and hold a key on
the keyboard, it will only input once unless you lift it and press it again.
Let’s do some example together…
Example 1: Select 1st Radio Button
1. Click on “Record” (Reference: Image A)
2. Press “R” on the Keyboard
3. Click “OK”
4. It will bring you back to previous page
5. Now click on “Keystroke (R)”, the one you just created
(Image A)
6. Select the Mouse Button (green icon) on the Mouse Image to your right
to store the “Keystroke (R)”.
7. Green icon will turn red once it’s been selected. (Image B)
8. Click “Apply” >> “OK”
We have stored it in Mouse Button # 2.
Let’s try it on regular word document or on game application (Counter
Strikes).
zTry it on Word Document. Press and hold your mouse button #2.
Did you see the character “RRRRRRR” inputted consecutively?
zTry it on Game Application. Press and hold your mouse button #
3. In Counter Strike, “Keystroke (R)” means to add bullets. Did
you see it adding bullets? If yes, you have successfully created a
command.
Example 2: Select 1st Radio Button
1. Click on “Ctrl+A” (Reference: Image C)
2. Press “Ctrl+A” on the Keyboard
3. Click “OK”
4. It will bring you back to previous page
(Image B)
(Image C)
Inhaltsverzeichnis
Andere Gigabyte Maus Handbücher
Gigabyte
Gigabyte M6980 Bedienungsanleitung
Gigabyte
Gigabyte Aivia Uranium Bedienungsanleitung
Gigabyte
Gigabyte M870A Bedienungsanleitung
Gigabyte
Gigabyte Aivia M8600 Bedienungsanleitung
Gigabyte
Gigabyte GM-M7600 Bedienungsanleitung
Gigabyte
Gigabyte Aire M77 Bedienungsanleitung
Gigabyte
Gigabyte AIRE M73 Bedienungsanleitung
Gigabyte
Gigabyte Aivia M8600 Bedienungsanleitung
Gigabyte
Gigabyte Aivia Uranium Bedienungsanleitung
Gigabyte
Gigabyte GM-W9C Bedienungsanleitung
Gigabyte
Gigabyte XM300 Bedienungsanleitung
Gigabyte
Gigabyte m6980x Bedienungsanleitung
Gigabyte
Gigabyte GM-AIRE M60 Bedienungsanleitung
Gigabyte
Gigabyte Aivia M8600 Bedienungsanleitung
Gigabyte
Gigabyte ECO500 Bedienungsanleitung
Gigabyte
Gigabyte GM-M8000 Bedienungsanleitung
Gigabyte
Gigabyte GM-M7700 Bedienungsanleitung
Gigabyte
Gigabyte AIRE M93 ICE Bedienungsanleitung
Gigabyte
Gigabyte M7700B Bedienungsanleitung
Gigabyte
Gigabyte ECO600 Bedienungsanleitung
