Gigabyte GV-NX76T256HI-RH Bedienungsanleitung

Feb. 5, 2007

VGA Card

GV-NX76T256HI-RH

VGA Card

Feb. 5, 2007

GV-NX76T256HI-RH

GeForce™7600 GT Graphics Accelerator

User's Manual

Rev. 101

12MD-NX76THR-101R

* The WEEE marking on the product indicates this product must not be disposed of with user's other household waste

and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!

* The WEEE marking applies only in European Union's member states.

without the expressed, written permission of GBT.

Trademarks

Third-party brands and names are the property of their respective owners.

Notice

Please do not remove any labels on VGA card, this may void the warranty of this VGA card

Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.

The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a

commitment to update the information contained herein.

Macrovision corporation product notice:

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.

Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing

uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

GV-NX76T256HI-RH Graphics Accelerator - 2 -

English

Table of Contents

1. Introduction ......................................................................................... 3

1.1. Features ..................................................................................................... 3

1.2. Minimum System Requirements ................................................................... 3

2. Hardware Installation ........................................................................... 4

2.1. Board Layout .............................................................................................. 4

2.2. Hardware Installation ................................................................................... 6

3. Software Installation .......................................................................... 13

3.1. Windows®XP Driver and Utilities Installation ............................................... 13

3.1.1. Operating System Requirement ................................................................................. 13

3.1.2. DirectX Installation ........................................................................................................ 14

3.1.3. Driver Installation .......................................................................................................... 15

3.1.4. Utilities on Driver CD ................................................................................................... 17

3.1.5. Taskbar Icon ................................................................................................................. 19

3.1.6. Display Properties Pages ............................................................................................ 22

3.1.7. nView Properties pages .............................................................................................. 29

3.2. Windows®2000 Driver Installation ............................................................. 34

4. Troubleshooting Tips ........................................................................ 35

5. Appendix .......................................................................................... 36

5.1. How to Reflash the BIOS ........................................................................... 36

5.1.1. Reflash BIOS in MS-DOS Mode ................................................................................. 36

5.1.2. Reflash BIOS in Windows Mode ................................................................................ 36

5.2. Connecting to a HDTV .............................................................................. 37

5.3. Resolutions and Color Depth Table (In Windows®XP) ............................... 38

Introduction- 3 -

English

1. Introduction

1.1. Features

•Powered by NVIDIA®GeForce™7600 GT Graphics Processing Unit (GPU)

•Supports the newest PCI Express x16

•Integrated with 256 MB DDRIII memory

•Supports DirectX 9.0c

•Supports NVIDIA® SLITM (Scalable Link Interface) technology (Note)

•Supports AV / S-Video and HDTV output

•Supports HDMI connector

•Supports DVI-I connector

1.2. Minimum System Requirements

•Intel®Pentium®4 or AMD AthlonTM or higher

•One PCI Express x16 slot

•Operating Systems Windows®2000 / Windows®XP

•512 MB of system memory

•200 MB of available disk space for full installation

•CD-ROM or DVD-ROM drive

(Note): SLI technology requires a PCI Express motherboard with two x16 physical

connectors. Graphics cards working in an SLI configuration must be with the same model

name (e.g. GV-NX76T256HI-RH) and from the same vendor (e.g. GIGABYTE

TECHNOLOGY).

GV-NX76T256HI-RH Graphics Accelerator - 4 -

English

2. Hardware Installation

2.1. Board Layout

SLI Connector

TV-Out

DVI-I Connector

HDMI Connector

Analog LCD Monitor

Digital LCD Monitor

DVI Output

DVI-I to D-Sub

Connector

VGA Output

S-Video Output

Pb/AV Output

NTSC / PAL TV Projector

HDTV

NTSC / PAL TV Projector

DVI-I

Connector

HDMI

Connector

TV-Out

HDMI to DVI-I Connector

Digital LCD Monitor

DVI Output

HDMI TV

Hardware Installation- 5 -

English

Expansion cards contain very delicate Integrated Circuit (IC) chips. To

protect them against damage from static electricity, you should follow some

precautions whenever you work on your computer.

1. Turn off your computer and unplug power supply.

2. Use a grounded wrist strap before handling computer components. If you do not have

one, touch both of your hands to a safely grounded object or to a metal object, such as

the power supply case.

3. Place components on a grounded antistatic pad or on the bag that came with the

components whenever the components are separated from the system.

The card contains sensitive electric components, which can be easily damaged by static

electricity, so the card should be left in its original packing until it is installed.

Unpacking and installation should be done on a grounded anti-static mat. The operator

should be wearing an anti-static wristband, grounded at the same point as the anti-static

mat.

Inspect the card carton for obvious damage. Shipping and handling may cause damage

to your card. Be sure there are no shipping and handling damages on the card before

proceeding.

DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON

THE CARD.

In order to ensure your graphics card working correctly, please use official

Gigabyte BIOS only. Use none official Gigabyte BIOS might cause problem

on the graphics card.

GV-NX76T256HI-RH Graphics Accelerator - 6 -

English

2.2. Hardware Installation

Installing Your graphics card.

Now that you have prepared your computer, you are ready to install your graphics accelerator

card.

To remove the existing graphics card:

1. Power off the computer and monitor, then

disconnect the display cable from the back

of your computer.

2. Remove the computer cover. If necessary,

consult your computer's manual for help in

removing the cover.

3. Remove any existing graphics card from

your computer.

Or, if your computer has any on-board

graphics capability, you may need to disable

it on the motherboard. For more information,

please see your computer documentation.

Hardware Installation- 7 -

English

2. Replace the screws to fasten the card in

place, and replace the computer cover.

3. The GV-NX76T256HI-RH provides one

DVI-I connector and one HDMI connector.

Plug the display cable into your graphics

card; then turn on the computer and monitor.

To connect a flat panel directly to your

graphics card, use the DVI-I connector. To

connect a VGA monitor to the DVI-I

connector, plug the DVI-I to D-sub adapter

intotheDVI-I connector, thenplugthe monitor

cable into the adapter.

To install your new graphics card:

1. Locate one PCI Express x16 slot. If

necessary, remove the metal cover from the

slot; then align your graphics card with the

PCI Express x16 slot, and press it in firmly

until the card is fully seated.

* Please make sure that the gold edge

connectors of the graphics card is securely

inserted.

Connect a flat panel

Connect a VGA monitor via DVI-I to D-sub adapter

GV-NX76T256HI-RH Graphics Accelerator - 8 -

English

4. To connect an HDMI TV, use either

Method A or Method B below (depending

on your motherboard design) to enable

the S/PDIF in function for the graphics card.

It is recommended Method A be used on

motherboards that have a free S/PDIF

header.

A-1. Connect the SPDIF cable to the graphics card

A-2. Connect the SPDIF cable to the motherboard.

B-1. Connect the GIGABYTE video adapter to

the TV-Out port on the graphics card

B-2. Connect the SPDIF coaxial cable (optional)

to the video adapter and motherboard

Method B (via the coaxial S/PDIF out

jack): Connect the GIGABYTE video

adapter to the TV-Out port on the graphics

card. Insert one end of the SPDIF coaxial

cable (optional) into the S/PDIF in jack on

the adapter and the other end into the

coaxial S/PDIF out jack on your

motheboard.

Method A (via the S/PDIF out header):

Connect the provided S/PDIF cable to the

graphics card and the S/PDIF out header

on your motherboard (the red wire

connects to the S/PDIF out pin and the

black to the Ground pin).

Inhaltsverzeichnis

Andere Gigabyte Grafikkarte Handbücher

Gigabyte

Gigabyte GV-R567D3-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-N550D5-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-RX55128D Bedienungsanleitung

Gigabyte

Gigabyte GV-AG32S Bedienungsanleitung

Gigabyte

Gigabyte GV-NX79X512DB-ED-RH Bedienungsanleitung

Gigabyte

Gigabyte GV-RX80L256V Bedienungsanleitung

Gigabyte

Gigabyte GV-R96X128D Ultra Bedienungsanleitung

Gigabyte

Gigabyte GV-N780OC-3GD Bedienungsanleitung

Gigabyte

Gigabyte GV-N57128DE Bedienungsanleitung

Gigabyte

Gigabyte GV-R575SL-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-R645D3-512I Bedienungsanleitung

Gigabyte

Gigabyte GV-RX13128D-RH Bedienungsanleitung

Gigabyte

Gigabyte GV-RX155256D-RH Bedienungsanleitung

Gigabyte

Gigabyte GV-RX29T512VH-B Bedienungsanleitung

Gigabyte

Gigabyte GV-NX72G128D Bedienungsanleitung

Gigabyte

Gigabyte GV-RX105512P8-RH Bedienungsanleitung

Gigabyte

Gigabyte GV-NX79T256DP-RH Bedienungsanleitung

Gigabyte

Gigabyte GV-N450OC2-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-NX66128DP-SI Bedienungsanleitung

Gigabyte

Gigabyte GV-R96P256D Bedienungsanleitung

Gigabyte

Gigabyte GV-R545SL-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-N56X128D-P Bedienungsanleitung

Gigabyte

Gigabyte GV-NX66T128DE Bedienungsanleitung

Gigabyte

Gigabyte GV-R545HM-1GI Bedienungsanleitung

Beliebte Grafikkarte Handbücher anderer Marken

Gainward

Gainward GeForce GTX 690 4GB Bedienungsanleitung

ATI Technologies

ATI Technologies RADEON 137-40225-20 Bedienungsanleitung

MSI

MSI N220GT series Bedienungsanleitung

ATI Technologies

ATI Technologies RADEON 7000 MAC EDITION Bedienungsanleitung

SIIG

SIIG aurora Bedienungsanleitung

ClearSpeed

ClearSpeed ClearSpeed Advance e720 Bedienungsanleitung

MSI

MSI R7850 series Bedienungsanleitung

DVS

DVS Atomix HDMI Bedienungsanleitung

Aztech

Aztech VGS3D-AGP Bedienungsanleitung

Advoli

Advoli TB4 Standard Bedienungsanleitung

ELSA

ELSA ERAZOR III LT Bedienungsanleitung

Themis

Themis TGA-7000 PMC Bedienungsanleitung

EMS

EMS XtremeRGB-Ex1 Bedienungsanleitung

Pioneer

Pioneer PDA-5003 Bedienungsanleitung

QDI

QDI N2 Bedienungsanleitung

NEC

NEC N8116-48 Bedienungsanleitung

Nvidia

Nvidia Quadro Workstation Bedienungsanleitung

MSI

MSI R7770 PoweR Edition Bedienungsanleitung