Gigabyte GV-RX165256D-RH Bedienungsanleitung

GV-RX165256D-RH

RadeonTM X1650 Graphics Accelerator

User's Manual

Rev. 101

12MD-RX1652DR-101R

* The WEEE marking on the product indicates this product must not be disposed of with user's other household waste

and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!

* The WEEE marking applies only in European Union's member states.

without the expressed, written permission of GBT.

Trademarks

Third-party brands and names are the property of their respective owners.

Notice

Please do not remove any labels on VGA card, this may void the warranty of this VGA card

Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.

The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a

commitment to update the information contained herein.

Macrovision corporation product notice:

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.

Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing

uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

- 2 -

English

GV-RX165256D-RH Graphics Accelerator

Table of Contents

1. Introduction ......................................................................................... 3

1.1. Features ..................................................................................................... 3

1.2. Minimum System Requirement ..................................................................... 3

2. Hardware Installation ........................................................................... 4

2.1. Board Layout .............................................................................................. 4

2.2. Hardware Installation ................................................................................... 6

3. Software Installation .......................................................................... 11

3.1. Windows®XP Driver and Utilities Installation ................................................11

3.1.1. Operating System Requirement .................................................................................. 11

3.1.2. DirectX Installation ........................................................................................................ 12

3.1.3. Driver Installation .......................................................................................................... 13

3.1.4. Utilities on Driver CD ................................................................................................... 15

3.1.5. Taskbar Icon ................................................................................................................. 18

3.1.6. Display Properties pages ............................................................................................ 21

3.2. Windows®2000 Driver Installation ............................................................. 38

4. Troubleshooting Tips ........................................................................ 39

5. Appendix .......................................................................................... 40

5.1. How to Reflash the BIOS ........................................................................... 40

5.1.1. Reflash BIOS in MS-DOS mode ................................................................................. 40

5.1.2. Reflash BIOS in Windows mode ................................................................................ 40

5.2. Resolutions and Color Depth Table (In Windows®XP) ............................... 41

Introduction- 3 -

English

1. Introduction

1.1. Features

•Powered by ATi RadeonTM X1650 Graphics Processing Unit (GPU)

•Supports PCI Express x16

•Integrated with 256 MB GDDR2 memory

•Supports DirectX 9.0c

•Supports software CrossFireTM

•Supports AV / S-Video / TV-Out and HDTV output

•Supports 2 Dual-Link DVI-I connectors

•Supports 2 D-sub connectors (by adapters)

1.2. Minimum System Requirements

•Hardware

- Intel®Pentium®4 or AMD AthlonTM

- 512 MB of system memory ; 1 GB or more for best performance

- Optical drive for software installation (CD-ROM or DVD-ROM drive)

•Operating System

- Windows® XP with Service Pack 2 (SP2)

- Windows®XP Professional x64 Edition

- Windows®2000

•CrossFireTM Configuration

If you are planning on using this graphics card as part of a CrossFireTM system, the

following is required:

- A CrossFireTM certified motherboard with two PCI Express x16 slots and

correct PCIe chipset driver

- Two X1650 cards

- A power supply with 450-watt or above

- Windows® XP with Service Pack 2 (SP2) or Windows®XP Professional

x64 Edition

- 4 -

English

GV-RX165256D-RH Graphics Accelerator

2. Hardware Installation

2.1. Board Layout

TV-Out

DVI-I Connector 2

DVI-I Connector 1

TV-Out

DVI-I

Connector 2

DVI-I

Connector 1

Digital LCD Monitor

DVI Output

DVI-I to D-Sub

Adapter

S-Video Output

Pb/AV Output

NTSC / PAL TV Projector

HDTV

NTSC / PAL TV Projector

Analog LCD or CRT Monitor

OR VGA

Output

Hardware Installation

- 5 -

English

Expansion cards contain very delicate Integrated Circuit (IC) chips. To

protect them against damage from static electricity, you should follow some

precautions whenever you work on your computer.

1. Turn off your computer and unplug power supply.

2. Use a grounded wrist strap before handling computer components. If you do not have

one, touch both of your hands to a safely grounded object or to a metal object, such as

the power supply case.

3. Place components on a grounded antistatic pad or on the bag that came with the

components whenever the components are separated from the system.

The card contains sensitive electric components, which can be easily damaged by static

electricity, so the card should be left in its original packing until it is installed.

Unpacking and installation should be done on a grounded anti-static mat. The operator

should be wearing an anti-static wristband, grounded at the same point as the anti-static

mat.

Inspect the card carton for obvious damage. Shipping and handling may cause damage

to your card. Be sure there are no shipping and handling damages on the card before

proceeding.

DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON

THE CARD.

In order to ensure your graphics card working correctly, please use official

Gigabyte BIOS only. Use none official Gigabyte BIOS might cause problem

on the graphics card.

- 6 -

English

GV-RX165256D-RH Graphics Accelerator

2.2. Hardware installation

Installing Your graphics card.

Now that you have prepared your computer, you are ready to install your graphics accelerator

card.

To remove the existing graphics card:

1. Power off the computer and monitor, then

disconnect the display cable from the back

of your computer.

2. Remove the computer cover. If necessary,

consult your computer's manual for help in

removing the cover.

3. Remove any existing graphics card from

your computer.

Or, if your computer has any on-board

graphics capability, you may need to disable

it on the motherboard. For more information,

please see you computer documentation.

Hardware Installation

- 7 -

English

You are now ready to proceed with the installation of the graphics card driver. Please

refer to next chapter for detailed instructions.

2. Replace the screw to fasten the card in place,

and replace the computer cover.

To TV/VCR

To install your new graphics card:

1. Locate a PCI Express x16 slot. If necessary,

remove the metal cover from the slot; then

align your graphics card with the PCI

Express x16 slot, and press it in firmly until

the card is fully seated.

* Please make sure that the gold edge connectors of the graphics card is securely inserted.

3. Plug the flat panel display cable into your

card; then turn on the computer and monitor.

If you wish to connect a VGA monitor via the

adapter, connect the 15-pin display cable

of the VGA monitor to the VGA connector of

the adapter.

To Flat Panel Display

- 8 -

English

GV-RX165256D-RH Graphics Accelerator

GIGABYTE Component Video Adapter for ATI Graphics Cards

(1) Connecting HDTV

Connect your HDTV cables to the component video

adapter according to the corresponding color. (Y= Green,

Pr= Red, Pb= Blue)

(2) Connecting S-Video

If your TV has a S-Video connection, connect the S-

Video cable from your TV to the S-Video Out port on the

adapter.

(3) Connecting AV Output

If your TV has Composite video connection, you can

connect the RCA cable from your TV to the AV Out port

on the adapter.

Connect to the TV-

Out port on the

graphics card.

S-Video Out HDTV Component

(Y+Pr+Pb)

AV Out

Hardware Installation

- 9 -

English

GIGABYTE Thermal Solution Guidelines:

1. GIGABYTE established the use of silent pipes on graphics card's thermal solution, and has been

the leading company for silent thermal solution. GIGABYTE's passive thermal solution allows

system to work perfectly in chassis with 40~50 degrees Celsius through the air flow of the system.

Please beware of the other excess component or insufficient system thermal design that may

cause high system temperature. Excess high temperature will affect the passive thermal design

and thus compromising system stability.

2. GIGABYTE TECHNOLOGY's passive thermal design effectively implemented heat exchange,

radiation and convection to improve stability of the system. Please maintain passive thermal sink

at a normal and clean environment. Extra dust on heatsink may decrease the effectiveness of the

thermal design.

Silent Thermal Technology Passive Thermal Design

- 10 -

English

GV-RX165256D-RH Graphics Accelerator

Step 1: After installing graphics card driver in operating system, access the ATI CATALYST

Control Center (please refer to Page 20). From the ATI CATALYST Control Center, enter the

CrossFire menu and assure to select the Enable CrossFire checkbox (Figure 2).

Step 2: When the next confirmation dialog box appears (Figure 3), click Yes to complete the

CrossFire configurations.

How to enable the ATI CrossFireTM technology:

After installing two CrossFire graphics cards of the same chipset (example: GV-RX13 series/

GV-RX16 series) (Figure 1) on a CrossFire-supported motherboard, users can enable the

CrossFire technology simply through the graphics card driver .

Figure 2

(Note): The CrossFireTM technology can operate in Windows XP operating system only.

Please do not enable CrossFire in Windows 2000.

Figure 1

Figure 3

Inhaltsverzeichnis

Andere Gigabyte Grafikkarte Handbücher

Gigabyte

Gigabyte GV-N84S-512I Rev3.0 Bedienungsanleitung

Gigabyte

Gigabyte GV-R7500L Bedienungsanleitung

Gigabyte

Gigabyte GV-N57128D Bedienungsanleitung

Gigabyte

Gigabyte GV-N450-512I Bedienungsanleitung

Gigabyte

Gigabyte GV-N595U-GT Bedienungsanleitung

Gigabyte

Gigabyte GV-R587SO-1GD Bedienungsanleitung

Gigabyte

Gigabyte GV-RX85T256V-B Bedienungsanleitung

Gigabyte

Gigabyte GV-NX66128DP-SI Bedienungsanleitung

Gigabyte

Gigabyte GV-N40128DE Bedienungsanleitung

Gigabyte

Gigabyte GV-N26UD-896M Bedienungsanleitung

Gigabyte

Gigabyte GV-3D1-68GT Bedienungsanleitung

Gigabyte

Gigabyte GV-N450OC-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-NX65128D Bedienungsanleitung

Gigabyte

Gigabyte GV-N98TGR-512I Bedienungsanleitung

Gigabyte

Gigabyte GV-R697OC-2GD Bedienungsanleitung

Gigabyte

Gigabyte GV-NX86T256H Bedienungsanleitung

Gigabyte

Gigabyte GV-N430OC-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-RX80L256V Bedienungsanleitung

Gigabyte

Gigabyte GV-RC19T512B-RH Bedienungsanleitung

Gigabyte

Gigabyte NVIDIA GV-N730D5-2GI Bedienungsanleitung

Gigabyte

Gigabyte GV-R92128DH Bedienungsanleitung

Gigabyte

Gigabyte GV-R695UD-1GD Bedienungsanleitung

Gigabyte

Gigabyte GV-R545HM-1GI Bedienungsanleitung

Gigabyte

Gigabyte GV-RX80256DE Bedienungsanleitung

Beliebte Grafikkarte Handbücher anderer Marken

Gainward

Gainward GeForce GTX 690 4GB Bedienungsanleitung

ATI Technologies

ATI Technologies RADEON 137-40225-20 Bedienungsanleitung

MSI

MSI N220GT series Bedienungsanleitung

ATI Technologies

ATI Technologies RADEON 7000 MAC EDITION Bedienungsanleitung

SIIG

SIIG aurora Bedienungsanleitung

ClearSpeed

ClearSpeed ClearSpeed Advance e720 Bedienungsanleitung

MSI

MSI R7850 series Bedienungsanleitung

DVS

DVS Atomix HDMI Bedienungsanleitung

Aztech

Aztech VGS3D-AGP Bedienungsanleitung

Advoli

Advoli TB4 Standard Bedienungsanleitung

ELSA

ELSA ERAZOR III LT Bedienungsanleitung

Themis

Themis TGA-7000 PMC Bedienungsanleitung

EMS

EMS XtremeRGB-Ex1 Bedienungsanleitung

Pioneer

Pioneer PDA-5003 Bedienungsanleitung

QDI

QDI N2 Bedienungsanleitung

NEC

NEC N8116-48 Bedienungsanleitung

Nvidia

Nvidia Quadro Workstation Bedienungsanleitung

MSI

MSI R7770 PoweR Edition Bedienungsanleitung