GigaDevice Semiconductor GD32H737 Bedienungsanleitung

GigaDevice Semiconductor Inc.

GD32H737/757/759

Arm® Cortex®-M7 32-bit MCU

User Manual

Revision 1.0

(May. 2023)

                                             GD32H737/757/759 User Manual 

 
Table of Contents 
Table of Contents ...........................................................................................................2
List of Figures ..............................................................................................................38 
List of Tables ................................................................................................................52 
System and memory architecture ........................................................................59 
1. Arm®Cortex®-M7 processor ..................................................................................... 59 
2. System architecture .................................................................................................. 60 
2.1. Bus matrix Region 0 ............................................................................................................. 63 
2.2. Bus matrix Region 1 ............................................................................................................. 63 
2.3. Bus matrix Region 2 ............................................................................................................. 64 
3. Memory map .............................................................................................................. 65 
3.1. On-chip SRAM memory........................................................................................................ 73 
3.2. On-chip flash memory overview ........................................................................................... 75 
4. Boot configuration..................................................................................................... 75 
5. System configuration controller (SYSCFG)............................................................. 76 
6. Timer break input lock .............................................................................................. 77 
7. AXI interconnect matrix (AXIIM) ............................................................................... 77 
7.1. Characteristics ...................................................................................................................... 77 
7.2. Function overview ................................................................................................................. 77 
8. System configuration registers................................................................................ 79 
8.1. Peripheral mode configuration register (SYSCFG_PMCFG) ............................................... 79 
8.2. EXTI sources selection register 0 (SYSCFG_EXTISS0)...................................................... 81 
8.3. EXTI sources selection register 1 (SYSCFG_EXTISS1)...................................................... 82 
8.4. EXTI sources selection register 2 (SYSCFG_EXTISS2)...................................................... 83 
8.5. EXTI sources selection register 3 (SYSCFG_EXTISS3)...................................................... 84 
8.6. Lockup control register (SYSCFG_LKCTL).......................................................................... 86 
8.7. I/O compensation control register (SYSCFG_CPSCTL) ...................................................... 87 
8.8. I/O compensation cell code configuration register (SYSCFG_CPSCCCFG) ....................... 88 
8.9. Timer input selection register 0 (SYSCFG_TIMERCISEL0)................................................. 89 
8.10. Timer input selection register 1 (SYSCFG_TIMERCISEL1)................................................. 90 
8.11. Timer input selection register 2 (SYSCFG_TIMERCISEL2)................................................. 91 
8.12. Timer input selection register 3 (SYSCFG_TIMERCISEL3)................................................. 92 
8.13. Timer input selection register 4 (SYSCFG_TIMERCISEL4)................................................. 94 
8.14. Timer input selection register 5 (SYSCFG_TIMERCISEL5)................................................. 95 
8.15. Timer input selection register 6 (SYSCFG_TIMERCISEL6)................................................. 97 
8.16. CPU ICACHE error status register(SYSCFG_CPUICAC).................................................... 98 
8.17. CPU DCACHE error status register (SYSCFG_CPUDCAC) ............................................... 99 

                                             GD32H737/757/759 User Manual 

 
8.18. FPU interrupt enable register (SYSCFG_FPUINTEN) ......................................................... 99 
8.19. SRAM configuration register 0 (SYSCFG_SRAMCFG0) ................................................... 100 
8.20. SRAM configuration register 1 (SYSCFG_SRAMCFG1) ................................................... 101
8.21. TIMERx configuration register 0 (SYSCFG_TIMERxCFG0, x=0, 7) .................................. 101 
8.22. TIMERx configuration register 1 (SYSCFG_TIMERxCFG1, x=0, 7) .................................. 104 
8.23. TIMERx configuration register 2 (SYSCFG_TIMERxCFG2, x=0, 7) .................................. 106 
8.24. TIMERx configuration register 0 (SYSCFG_TIMERxCFG0, x=1, 2, 3, 4, 22, 23, 30, 31) .. 107 
8.25. TIMERx configuration register 1 (SYSCFG_TIMERxCFG1, x=1, 2, 3, 4, 22, 23, 30, 31) .. 109 
8.26. TIMERx configuration register 2 (SYSCFG_TIMERxCFG2, x=1, 2, 3, 4, 22, 23, 30, 31) ...112 
8.27. TIMERx configuration register 0 (SYSCFG_TIMERxCFG0, x=14, 40, 41, 42, 43, 44) .......113 
8.28. TIMERx configuration register 1 (SYSCFG_TIMERxCFG1, x=14, 40, 41, 42, 43, 44).......115 
8.29. TIMERx configuration register 2 (SYSCFG_TIMERxCFG2, x=14, 40, 41, 42, 43, 44) .......116 
8.30. User configuration register (SYSCFG_USERCFG).............................................................117 
9. AXI interconnect registers.......................................................................................118 
9.1. AXI peripheral ID4 register (AXI_PERIPH_ID4) ..................................................................118 
9.2. AXI peripheral ID0 register (AXI_PERIPH_ID0) ..................................................................118 
9.3. AXI peripheral ID1 register (AXI_PERIPH_ID1) ..................................................................119 
9.4. AXI peripheral ID2 register (AXI_PERIPH_ID2) ..................................................................119 
9.5. AXI peripheral ID3 register (AXI_PERIPH_ID3) ................................................................. 120 
9.6. AXI componet ID0 register (AXI_COMP_ID0).................................................................... 120 
9.7. AXI componet ID1 register (AXI_COMP_ID1).................................................................... 120 
9.8. AXI componet ID2 register (AXI_COMP_ID2).................................................................... 121 
9.9. AXI componet ID3 register (AXI_COMP_ID3).................................................................... 121 
9.10. AXI Master Port x bus matrix issuing functionality control register (AXI_MPxBM_ISS_CTL)

9.11. AXI Master Port x bus matrix functionality control register (AXI_MPxBM_CTL) ................ 122 
9.12. AXI Master Port x long burst functionality control register (AXI_MPx_LB_CTL) ................ 123 
9.13. AXI Master Port x issuing functionality control register (AXI_MPx_ISS_CTL) ................... 123 
9.14. AXI Slave Port x functionality control register (AXI_SPx_CTL) .......................................... 124 
9.15. AXI Slave Port x AHB issuing functionality control register (AXI_SPx_AHBISS_CTL) ...... 124 
9.16. AXI Slave Port x read QOS control register (AXI_SPx_RDQOS_CTL) ............................. 125 
9.17. AXI Slave Port x write QOS control register (AXI_SPx_WRQOS_CTL) ............................ 125 
9.18. AXI Slave Port x issuing functionality control register (AXI_SPx_ISS_CTL)...................... 126 
10. Device electronic signature................................................................................. 126 
10.1. Memory density information................................................................................................ 127 
10.2. Unique device ID (96 bits) .................................................................................................. 127 
RAM ECC monitor unit (RAMECCMU)................................................................129 
1. Characteristics......................................................................................................... 129 
2. Function overview................................................................................................... 129 
3. Register definition................................................................................................... 131 
3.1. RAMECCMU global interruput register (RAMECCMU_INT) .............................................. 131 

                                             GD32H737/757/759 User Manual 

 
3.2. RAMECCMU monitor x control register (RAMECCMU_MxCTL) ....................................... 131 
3.3. RAMECCMU monitor x status register (RAMECCMU_MxSTAT)....................................... 132 
3.4. RAMECCMU monitor x failing address register (RAMECCMU_MxFADDR) ..................... 133 
3.5. RAMECCMU monitor x failing data low register (RAMECCMU_MxFDL) .......................... 134 
3.6. RAMECCMU monitor x failing data high register (RAMECCMU_MxFDH) ........................ 134 
3.7. RAMECCMU monitor x failing ECC error code register (RAMECCMU_MxFECODE) ...... 134 
Flash memory controller (FMC)..........................................................................136 
1. Overview .................................................................................................................. 136 
2. Characteristics......................................................................................................... 136 
3. Function overview................................................................................................... 136 
3.1. Flash memory architecture ................................................................................................. 136 
3.2. Read operations ................................................................................................................. 137 
3.3. Unlock the FMC_CTL and FMC_OBCTL register .............................................................. 138 
3.4. Sector erase........................................................................................................................ 139 
3.5. Mass erase ......................................................................................................................... 140 
3.6. Main flash Programming..................................................................................................... 144 
3.7. Option bytes........................................................................................................................ 145 
3.8. Sector erase/program protection ........................................................................................ 148 
3.9. Security protection .............................................................................................................. 149 
3.10. Dedicated code read protection area ................................................................................. 151 
3.11. Secure user area ................................................................................................................ 153 
3.12. Secure mode....................................................................................................................... 154 
3.13. Basic security service ......................................................................................................... 156 
3.14. Error description.................................................................................................................. 157 
3.15. FMC interrupts .................................................................................................................... 159 
4. Register definition................................................................................................... 160 
4.1.Unlock key register (FMC_KEY)......................................................................................... 160 
4.2. Option byte unlock key register (FMC_OBKEY)................................................................. 160 
4.3. Control register (FMC_CTL) ............................................................................................... 160 
4.4. Status register (FMC_STAT)............................................................................................... 162 
4.5. Address register (FMC_ADDR) .......................................................................................... 163 
4.6. Option byte control register (FMC_OBCTL) ....................................................................... 164 
4.7. Option byte status register 0 (FMC_OBSTAT0_EFT)......................................................... 165 
4.8. Option byte status register 0 (FMC_OBSTAT0_MDF)........................................................ 166 
4.9. DCRP address register (FMC_DCRPADDR_EFT) ............................................................ 168 
4.10. DCRP address register (FMC_DCRPADDR_MDF) ........................................................... 169 
4.11. Secure address register (FMC_SCRADDR_EFT).............................................................. 170 
4.12. Secure address register (FMC_SCRADDR_MDF)............................................................. 170 
4.13. Erase/program protection register (FMC_WP_EFT) .......................................................... 171 
4.14. Erase/program protection register (FMC_WP_MDF) ......................................................... 172 
4.15. Boot address register (FMC_BTADDR_EFT) ..................................................................... 173 
4.16. Boot address register (FMC_BTADDR_MDF) .................................................................... 173 

                                             GD32H737/757/759 User Manual 

 
4.17. Option byte status register 1 (FMC_OBSTAT1_EFT)......................................................... 174 
4.18. Option byte status register 1 (FMC_OBSTAT1_MDF)........................................................ 175 
4.19. NO-RTDEC area register (FMC_NODEC) ......................................................................... 176 
4.20. AES IV register (FMC_AESIVx_EFT) (x = 0…2)................................................................ 176 
4.21. AES IV register (FMC_AESIVx_MDF) (x = 0…2)............................................................... 177 
4.22. Product ID register x (FMC_PIDx) (x = 0,1)........................................................................ 177 
Electronic fuse (EFUSE)......................................................................................179 
1. Overview .................................................................................................................. 179 
2. Characteristics......................................................................................................... 179 
3. Function overview................................................................................................... 179 
3.1. Block diagram ..................................................................................................................... 179 
3.2. Efuse macro description ..................................................................................................... 180 
3.3. Read operation ................................................................................................................... 183 
3.4. Program operation .............................................................................................................. 184 
3.5. AES key CRC function........................................................................................................ 184 
3.6. EFUSE interrupts ................................................................................................................ 185 
4. Register definition................................................................................................... 187 
4.1. Control register (EFUSE_CTL) ........................................................................................... 187 
4.2. Address register (EFUSE_ADDR) ...................................................................................... 188 
4.3. Status register (EFUSE_STAT) .......................................................................................... 189 
4.4. Status flag clear register (EFUSE_STATC) ........................................................................ 189 
4.5. User control register (EFUSE_USER_CTL) ....................................................................... 190 
4.6. MCU reserved register (EFUSE_MCU_RSV) .................................................................... 192 
4.7. Debug password register x (EFUSE_DPx) (x = 0,1) .......................................................... 194 
4.8. Firmware AES key register x (EFUSE_AES_KEYx) (x = 0…3) ......................................... 195 
4.9. User data register x (EFUSE_USER_DATAx) (x = 0…3) ................................................... 195 
Power management unit (PMU) ..........................................................................196 
1. Overview .................................................................................................................. 196 
2. Characteristics......................................................................................................... 196 
3. Function overview................................................................................................... 197 
3.1. Backup domain ................................................................................................................... 197 
3.2. VDD / VDDA power domain .................................................................................................... 199 
3.3. 0.9V power domain............................................................................................................. 203 
3.4. Power saving modes .......................................................................................................... 208 
4. Register definition................................................................................................... 210 
4.1. Control register 0 (PMU_CTL0) .......................................................................................... 210 
4.2. Control and status register (PMU_CS) ................................................................................211 
4.3. Control register 1 (PMU_CTL1) .......................................................................................... 213 
4.4. Control register 2 (PMU_CTL2) .......................................................................................... 215 
4.5. Control register 3 (PMU_CTL3) .......................................................................................... 216 

                                             GD32H737/757/759 User Manual 

 
4.6. Parameter register (PMU_PAR) ......................................................................................... 217 
Reset and clock unit (RCU).................................................................................219 
1. Reset control unit (RCTL) ....................................................................................... 219 
1.1. Overview ............................................................................................................................. 219 
1.2. Function overview ............................................................................................................... 219 
2. Clock control unit (CCTL) ....................................................................................... 220 
2.1. Overview ............................................................................................................................. 220 
2.2. Characteristics .................................................................................................................... 224 
2.3. Function overview ............................................................................................................... 224 
3. Register definition................................................................................................... 230 
3.1. Control register (RCU_CTL) ............................................................................................... 230 
3.2. PLL0 register (RCU_PLL0)................................................................................................. 232 
3.3. Clock configuration register 0 (RCU_CFG0) ...................................................................... 234 
3.4. Clock interrupt register (RCU_INT) .................................................................................... 236 
3.5. AHB1 reset register (RCU_AHB1RST) .............................................................................. 239 
3.6. AHB2 reset register (RCU_AHB2RST) .............................................................................. 241 
3.7. AHB3 reset register (RCU_AHB3RST) .............................................................................. 242 
3.8. AHB4 reset register (RCU_AHB4RST) .............................................................................. 243 
3.9. APB1 reset register (RCU_APB1RST) ............................................................................... 245 
3.10. APB2 reset register (RCU_APB2RST) ............................................................................... 248 
3.11. APB3 reset register (RCU_APB3RST) ............................................................................... 251 
3.12. APB4 reset register (RCU_APB4RST) ............................................................................... 252 
3.13. AHB1 enable register (RCU_AHB1EN) .............................................................................. 253 
3.14. AHB2 enable register (RCU_AHB2EN) .............................................................................. 255 
3.15. AHB3 enable register (RCU_AHB3EN) .............................................................................. 256 
3.16. AHB4 enable register (RCU_AHB4EN) .............................................................................. 258 
3.17. APB1 enable register (RCU_APB1EN) .............................................................................. 259 
3.18. APB2 enable register (RCU_APB2EN) .............................................................................. 263 
3.19. APB3 enable register (RCU_APB3EN) .............................................................................. 266 
3.20. APB4 enable register (RCU_APB4EN) .............................................................................. 266 
3.21. AHB1 sleep mode enable register (RCU_AHB1SPEN) ..................................................... 267 
3.22. AHB2 sleep mode enable register (RCU_AHB2SPEN) ..................................................... 270 
3.23. AHB3 sleep mode enable register (RCU_AHB3SPEN) ..................................................... 271 
3.24. AHB4 sleep mode enable register (RCU_AHB4SPEN) ..................................................... 273 
3.25. APB1 sleep mode enable register (RCU_APB1SPEN)...................................................... 274 
3.26. APB2 sleep mode enable register (RCU_APB2SPEN)...................................................... 278 
3.27. APB3 sleep mode enable register (RCU_APB3SPEN)...................................................... 281 
3.28. APB4 sleep mode enable register (RCU_APB4SPEN)...................................................... 281 
3.29. Backup domain control register (RCU_BDCTL) ................................................................. 282 
3.30. Reset source/clock register (RCU_RSTSCK) .................................................................... 284 
3.31. PLL clock additional control register (RCU_PLLADDCTL) ................................................. 286 
3.32. PLL1 register (RCU_PLL1)................................................................................................. 288 

                                             GD32H737/757/759 User Manual 

 
3.33. PLL2 register (RCU_PLL2)................................................................................................. 290 
3.34. Clock configuration register 1 (RCU_CFG1) ...................................................................... 292 
3.35. Clock configuration register 2 (RCU_CFG2) ...................................................................... 294 
3.36. Clock configuration register 3 (RCU_CFG3) ...................................................................... 296 
3.37. PLL all configuration register (RCU_PLLALL) .................................................................... 298 
3.38. PLL0 fraction configuration register (RCU_PLL0FRA) ....................................................... 300 
3.39. PLL1 fraction configuration register (RCU_PLL1FRA) ....................................................... 300 
3.40. PLL2 fraction configuration register (RCU_PLL2FRA) ....................................................... 301 
3.41. Additional clock control register 0 (RCU_ADDCTL0) ......................................................... 302 
3.42. Additional clock control register 1(RCU_ADDCTL1) .......................................................... 303 
3.43. Additional clock interrupt register (RCU_ADDINT)............................................................. 304 
3.44. Clock configuration register 4 (RCU_CFG4) ...................................................................... 306 
3.45. USB clock control register (RCU_USBCLKCTL)................................................................ 307 
3.46. PLLUSB configuration register (RCU_PLLUSBCFG)......................................................... 309 
3.47. APB2 additional reset register (RCU_ADDAPB2RST)....................................................... 310 
3.48. APB2 additional enable register (RCU_ADDAPB2EN) .......................................................311 
3.49. APB2 additional sleep enable register (RCU_ADDAPB2SPEN)........................................ 312 
3.50. Clock configuration register 5 (RCU_CFG5) ...................................................................... 312 
Clock trim controller (CTC) .................................................................................315 
1. Overview .................................................................................................................. 315 
2. Characteristics......................................................................................................... 315 
3. Function overview ................................................................................................... 315 
3.1. REF sync pulse generator .................................................................................................. 316 
3.2. CTC trim counter................................................................................................................. 316 
3.3. Frequency evaluation and automatically trim process........................................................ 317 
3.4. Software program guide ..................................................................................................... 318 
4. Register definition ................................................................................................... 320 
4.1. Control register 0 (CTC_CTL0)........................................................................................... 320 
4.2. Control register 1 (CTC_CTL1)........................................................................................... 321 
4.3. Status register (CTC_STAT) ............................................................................................... 322 
4.4. Interrupt clear register (CTC_INTC) ................................................................................... 324 
Interrupt / event controller (EXTI).......................................................................326 
1. Overview .................................................................................................................. 326 
2. Characteristics......................................................................................................... 326 
3. Interrupts function overview................................................................................... 326 
4. External interrupt and event (EXTI) block diagram ............................................... 333 
5. External interrupt and event function overview .................................................... 333 
6. Register definition................................................................................................... 336 
6.1. Interrupt enable register 0 (EXTI_INTEN0) ........................................................................ 336 

                                             GD32H737/757/759 User Manual 

 
6.2. Event enable register 0 (EXTI_EVEN0) ............................................................................. 336 
6.3. Rising edge trigger enable register 0 (EXTI_RTEN0) ........................................................ 336 
6.4. Falling edge trigger enable register 0 (EXTI_FTEN0) ........................................................ 337 
6.5. Software interrupt event register 0 (EXTI_SWIEV0) .......................................................... 337 
6.6. Pending register 0 (EXTI_PD0) .......................................................................................... 338 
6.7. Interrupt enable register 1 (EXTI_INTEN1) ........................................................................ 338 
6.8. Event enable register 1 (EXTI_EVEN1) ............................................................................. 339 
6.9. Rising edge trigger enable register 1 (EXTI_RTEN1) ........................................................ 339 
6.10. Falling edge trigger enable register 1 (EXTI_FTEN1) ........................................................ 339 
6.11. Software interrupt event register 1 (EXTI_SWIEV1) .......................................................... 340 
6.12. Pending register 1 (EXTI_PD1) .......................................................................................... 340 
Trigger selection controller (TRIGSEL)..............................................................342 
1. Overview .................................................................................................................. 342 
2. Characteristics......................................................................................................... 342 
3. Function overview ................................................................................................... 342 
4. Internal connect....................................................................................................... 343 
5. Register definition ................................................................................................... 354 
5.1. Trigger selection for EXTOUT0 register (TRIGSEL_EXTOUT0) ........................................ 354 
5.2. Trigger selection for EXTOUT1 register (TRIGSEL_EXTOUT1)........................................ 354 
5.3. Trigger selection for EXTOUT2 register (TRIGSEL_EXTOUT2) ........................................ 355 
5.4. Trigger selection for EXTOUT3 register (TRIGSEL_EXTOUT3)........................................ 356 
5.5. Trigger selection for ADC0 register (TRIGSEL_ADC0) ...................................................... 356 
5.6. Trigger selection for ADC1 register (TRIGSEL_ADC1) ...................................................... 357 
5.7. Trigger selection for ADC2 register (TRIGSEL_ADC2) ...................................................... 358 
5.8. Trigger selection for DAC_OUT0 register (TRIGSEL_DACOUT0)..................................... 358 
5.9. Trigger selection for DAC_OUT1 register (TRIGSEL_DACOUT1)..................................... 359 
5.10. Trigger selection for TIMER0_BRKIN register (TRIGSEL_TIMER0BRKIN) ...................... 360 
5.11. Trigger selection for TIMER7_BRKIN register (TRIGSEL_TIMER7BRKIN) ...................... 360 
5.12. Trigger selection for TIMER14_BRKIN register (TRIGSEL_TIMER14BRKIN) .................. 361 
5.13. Trigger selection for TIMER15_BRKIN register (TRIGSEL_TIMER15BRKIN) .................. 362 
5.14. Trigger selection for TIMER16_BRKIN register (TRIGSEL_TIMER16BRKIN) .................. 363 
5.15. Trigger selection for TIMER40_BRKIN register (TRIGSEL_TIMER40BRKIN) .................. 363 
5.16. Trigger selection for TIMER41_BRKIN register (TRIGSEL_TIMER41BRKIN) .................. 364 
5.17. Trigger selection for TIMER42_BRKIN register (TRIGSEL_TIMER42BRKIN) .................. 365 
5.18. Trigger selection for TIMER43_BRKIN register (TRIGSEL_TIMER43BRKIN) .................. 365 
5.19. Trigger selection for TIMER44_BRKIN register (TRIGSEL_TIMER44BRKIN) .................. 366 
5.20. Trigger selection for CAN0 register (TRIGSEL_CAN0) ...................................................... 366 
5.21. Trigger selection for CAN1 register (TRIGSEL_CAN1) ...................................................... 367 
5.22. Trigger selection for CAN2 register (TRIGSEL_CAN2) ...................................................... 368 
5.23. Trigger selection for LPDTS register (TRIGSEL_LPDTS).................................................. 368 
5.24. Trigger selection for TIMER0_ETI register (TRIGSEL_TIMER0ETI) ................................. 369 

                                             GD32H737/757/759 User Manual 

 
5.25. Trigger selection for TIMER1_ETI register (TRIGSEL_TIMER1ETI) ................................. 369 
5.26. Trigger selection for TIMER2_ETI register (TRIGSEL_TIMER2ETI) ................................. 370 
5.27. Trigger selection for TIMER3_ETI register (TRIGSEL_TIMER3ETI) ................................. 371 
5.28. Trigger selection for TIMER4_ETI register (TRIGSEL_TIMER4ETI) ................................. 371 
5.29. Trigger selection for TIMER7_ETI register (TRIGSEL_TIMER7ETI) ................................. 372 
5.30. Trigger selection for TIMER22_ETI register (TRIGSEL_TIMER22ETI) ............................. 372 
5.31. Trigger selection for TIMER23_ETI register (TRIGSEL_TIMER23ETI) ............................. 373 
5.32. Trigger selection for TIMER30_ETI register (TRIGSEL_TIMER30ETI) ............................. 374 
5.33. Trigger selection for TIMER31_ETI register (TRIGSEL_TIMER31ETI) ............................. 374 
5.34. Trigger selection for EDOUT register (TRIGSEL_EDOUT)................................................ 375 
5.35. Trigger selection for HPDF_ITRG register (TRIGSEL_HPDF) ........................................... 375 
5.36. Trigger selection for TIMER0_ITI14 register (TRIGSEL_TIMER0ITI14) ............................ 376 
5.37. Trigger selection for TIMER1_ITI14 register (TRIGSEL_TIMER1ITI14) ............................ 377 
5.38. Trigger selection for TIMER2_ITI14 register (TRIGSEL_TIMER2ITI14) ............................ 377 
5.39. Trigger selection for TIMER3_ITI14 register (TRIGSEL_TIMER3ITI14) ............................ 378
5.40. Trigger selection for TIMER4_ITI14 register (TRIGSEL_TIMER4ITI14) ............................ 378 
5.41. Trigger selection for TIMER7_ITI14 register (TRIGSEL_TIMER7ITI14) ............................ 379 
5.42. Trigger selection for TIMER14_ITI14 register (TRIGSEL_TIMER14ITI14) ........................ 380 
5.43. Trigger selection for TIMER22_ITI14 register (TRIGSEL_TIMER22ITI14) ........................ 380 
5.44. Trigger selection for TIMER23_ITI14 register (TRIGSEL_TIMER23ITI14) ........................ 381 
5.45. Trigger selection for TIMER30_ITI14 register (TRIGSEL_TIMER30ITI14) ........................ 381 
5.46. Trigger selection for TIMER31_ITI14 register (TRIGSEL_TIMER31ITI14) ........................ 382 
5.47. Trigger selection for TIMER40_ITI14 register (TRIGSEL_TIMER40ITI14) ........................ 383 
5.48. Trigger selection for TIMER41_ITI14 register (TRIGSEL_TIMER41ITI14) ........................ 383 
5.49. Trigger selection for TIMER42_ITI14 register (TRIGSEL_TIMER42ITI14) ........................ 384 
5.50. Trigger selection for TIMER43_ITI14 register (TRIGSEL_TIMER43ITI14) ........................ 384 
5.51. Trigger selection for TIMER44_ITI14 register (TRIGSEL_TIMER44ITI14) ........................ 385 
General-purpose and alternate-function I/Os (GPIO and AFIO)....................387 
1. Overview............................................................................................................... 387 
2. Characteristics..................................................................................................... 387 
3. Function overview................................................................................................ 387 
3.1. GPIO pin configuration ....................................................................................................... 389 
3.2. External interrupt/event lines .............................................................................................. 390 
3.3. Alternate functions (AF) ...................................................................................................... 390 
3.4. Additional functions............................................................................................................. 390 
3.5. Input configuration .............................................................................................................. 390 
3.6. Output configuration ........................................................................................................... 390 
3.7. Analog configuration ........................................................................................................... 391 
3.8. Alternate function (AF) configuration .................................................................................. 392 
3.9. GPIO locking function ......................................................................................................... 392 
3.10. GPIO single cycle toggle function....................................................................................... 393 
3.11. I/O compensation unit ......................................................................................................... 393 

                                             GD32H737/757/759 User Manual 

 
3.12. Analog configuration for ADC ............................................................................................. 393 
3.13. Input filtering ....................................................................................................................... 394 
4. Register definition................................................................................................ 397 
4.1. Port control register (GPIOx_CTL, x=A...H, J, K) ............................................................... 397 
4.2. Port output mode register (GPIOx_OMODE, x=A…H, J, K) .............................................. 399 
4.3. Port output speed register (GPIOx_OSPD, x=A...H, J, K).................................................. 400 
4.4. Port pull-up/down register (GPIOx_PUD, x=A…H, J, K) .................................................... 402 
4.5. Port input status register (GPIOx_ISTAT, x=A…H, J, K) .................................................... 404 
4.6. Port output control register (GPIOx_OCTL, x=A…H, J, K)................................................. 404 
4.7. Port bit operate register (GPIOx_BOP, x=A...H, J, K) ........................................................ 405 
4.8. Port configuration lock register (GPIOx_LOCK, x=A...H, J, K)........................................... 405 
4.9. Alternate function selected register 0 (GPIOx_AFSEL0, x=A...H, J, K) ............................. 406 
4.10. Alternate function selected register 1 (GPIOx_AFSEL1, x=A…H, J, K)............................. 407 
4.11. Bit clear register (GPIOx_BC, x=A…H, J, K)...................................................................... 408 
4.12. Port bit toggle register (GPIOx_TG, x=A…H, J, K) ............................................................ 409 
4.13. Input filtering register (GPIOx_IFL, x=A...H, J, K) .............................................................. 409 
4.14. Input filtering type register (GPIOx_IFTP, x=A...H, J, K) .................................................... 410 
Cyclic redundancy checks management unit (CRC) .....................................412 
1. Overview ............................................................................................................... 412 
2. Characteristics ..................................................................................................... 412 
3. Function overview................................................................................................ 413 
4. Register definition................................................................................................ 414 
4.1. Data register (CRC_DATA) ................................................................................................. 414 
4.2. Free data register (CRC_FDATA)....................................................................................... 414 
4.3. Control register (CRC_CTL) ............................................................................................... 415 
4.4. Initialization data register (CRC_IDATA)............................................................................. 415 
4.5. Polynomial register (CRC_POLY)....................................................................................... 416 
True random number generator (TRNG).........................................................417 
1. Overview ............................................................................................................... 417 
2. Characteristics ..................................................................................................... 417 
3. Function overview................................................................................................ 418 
3.1. LFSR................................................................................................................................... 418 
3.2. Post processing .................................................................................................................. 419 
3.3. Conditioning ........................................................................................................................ 419 
3.4. Output FIFO ........................................................................................................................ 419 
3.5. Health tests ......................................................................................................................... 420 
3.6. NIST mode state ................................................................................................................. 421 
3.7. Operation flow..................................................................................................................... 421 
3.8. Error flags ........................................................................................................................... 422 
3.9. Low power usage................................................................................................................ 422 

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere GigaDevice Semiconductor Mikrocontroller Handbücher

GigaDevice Semiconductor

GigaDevice Semiconductor GD32150G-START Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32H7 Series Beilage

GigaDevice Semiconductor

GigaDevice Semiconductor GD32F1 0 Series Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32E230F-START Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32F3 0 Series Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32F3x0 Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32F1 0 Series Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32C10 Series Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32F20 Series Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32E230C-START Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32130G-START Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32F1 0 Series Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32W51 Series Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32F403 Series Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32F20 Series Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32E23 Series Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32E503R-START Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32F30 Series Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32F10 Series Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32130C-START Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32L233K-START Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32L23 Series Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32450Z-EVAL Bedienungsanleitung

GigaDevice Semiconductor

GigaDevice Semiconductor GD32VF103 Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F800 Bedienungsanleitung

Energy micro

Energy micro EFM32 Giant Gecko Starter Kit Bedienungsanleitung