Gigafast EE100-AEP Bedienungsanleitung

Dieses Handbuch passt für folgende Modelle

1

Andere Gigafast Adapter Handbücher

Gigafast

Gigafast 32-bit PCI BUS 10/100Mbps Fast Ethernet... Bedienungsanleitung

Gigafast

Gigafast WF728-AEX Bedienungsanleitung

Gigafast

Gigafast EE102-DLX Bedienungsanleitung

Gigafast

Gigafast WF727-AEX Bedienungsanleitung

Gigafast

Gigafast PE901-UI Bedienungsanleitung

Gigafast

Gigafast WF747-Ul Bedienungsanleitung

Gigafast

Gigafast PE909-UI Bedienungsanleitung

Gigafast

Gigafast EE100-AXP Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung

Ether Engine 100-AE

Installation

Hardware Installation:

To insert the network adapter into PC, follow the steps bellow:

1. Turn off the computer and remove its cover

2. Insert the adapter into a PCT slot

3. Secure this adapter to the rear of the computer chassis and put back the computer

cover.

4. Connect the adapter to the network using twisted-pair cable.

Driver Installation:

Win98

Turn on the computer; the window will automatically detect the network adapter. Insert

the Drive floppy, and put in a Win 98 CD in the CD-ROM

Screen 1: Found network adapter, click Next

Screen 2: Search for the best driver for your device (Recommended), click Next

Screen 3: Choose Specify a location and type in A:\Win98, click Next

Screen 4: The updated driver (Recommended), click Next

Screen 5: Windows driver file search for new device, click Next

Screen 6: click, Ok

Screen 7: Choose A:\Win98, click, Ok

Screen 8: Window will automatically copy some files from the Window 98 CD

Screen 9: Ether Engine 100-AE PCI card installation is done, click Finish

Screen 10: click Yes

Configuration: Win98 (no DHCP)

Screen 1: Right click Networking Neighborhood icon on the desktop, go to Properties

Highlight the TCP/IP, and then click the Properties button

Screen 2: Chose Specify an IP address, and assign a static IP address

Screen 3: If you have a DNS server, go to DNS Configuration. Key in the IP address

for DNS server and click Add

Screen 4: At the last, go to the Gateway. Key in the Gateway address and click Add.

Make sure click the Ok button at the bottom when you finish configuration.

Remarks:

1. Make sure the IP address you assign to the PCI card is under the same subnet with

the gateway. For example, if your subnet is “255.255.255.0”, that means all the

first three number of your IP setting should be the same. They could all look like

“192.168.1.X”. On the other hand, if your subnet is “255.255.0.0”, your IP could

assign like “192.168.X.X”.

2. If your networking has a DHCP server, you don’t have to assign a static IP. The

DHCP server will automatically send a dynamic IP to your computer when you

log on.

WIN 2k

Turn on the computer, the window will automatically detect the network adapter and

install the driver.

Configuration: WIN 2k (no DHCP)

Screen 1: Right click My Network Places icon on the desktop, go to Properties

Highlight Local Area Connection, go to Properties