Gigaset M101 Data Bedienungsanleitung

GigasetM101Data

coverm1.fm5

14.4.99

ACHTUNG! Schnittkante ggf. auf Titelseite U1 nach außen versetzen wg. Falz-Ausklappseite

The cordlessV.24/RS232 interface

for PCs, modems and other

equipment

Operating instruction

Please read the safety precautions outlined in these

operating instructions before putting the unit into service.

Gigaset M101 Data, eng/deut: A30853-X400-B104-3-74D1

klapps1.fm5

16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1

The most important menus

Setting the operating mode

Registering a Gigaset M101 Data

Starting the program

klapps1.fm5

16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1

Overview

1 2 3

Back

4. Port for the V.24/RS232

cable

1 = male

2 = female

5. Mains power supply socket for

plug-type AC adapter

Legend

Front

1.Operating LED,

illuminated when power supply

is active,

see "LEDs and buttons" on page

2. Data LED, illuminated during

data transfer operations

3. Reset key

Contents

giga_m101.IVZ

14.4.99 Gigaset M101 Data, eng/deut: A30853-X400-B104-3-

Updates and news on the Internet ................................................................................................ 5

Approval and conformity ................................................................................................................ 6

Notes on PC and modem operation ............................................................................................... 6

Notes on Gigaset Repeater ............................................................................................................ 6

Introduction .................................................................................................................................. 7

What is a Gigaset M101 Data? ...................................................................................................... 7

Safety precautions ................................................................................................................... 7

Putting into service ...................................................................................................................... 8

Checking the contents of the package ........................................................................................... 8

Important ........................................................................................................................................ 8

Installing the program package ....................................................................................................... 9

Prerequisites for installation ..................................................................................................... 9

Installation ................................................................................................................................ 9

Check installation is successful ............................................................................................... 9

Connecting stations ..................................................................................................................... 10

Initial configuration ................................................................................................................... 11

Configuration program options ................................................................................................ 12

General ......................................................................................................................................... 12

Starting the configuration program ............................................................................................... 12

The buttons .................................................................................................................................. 12

"Connection" tab ........................................................................................................................... 13

Upper section: connecting to the PC ..................................................................................... 13

Lower section: radio connection ............................................................................................ 13

"Operating mode" tab ................................................................................................................... 14

Setting the operating mode ................................................................................................... 14

Special settings for "Direct connection" mode ....................................................................... 15

"Local station" tab ......................................................................................................................... 15

Changing a name ................................................................................................................... 15

Changing a station type ......................................................................................................... 15

Registering an extension station ............................................................................................ 17

De-registering a extension station ......................................................................................... 18

"Partner station" tab ...................................................................................................................... 18

Changing the name ................................................................................................................ 18

Changing the PIN ................................................................................................................... 18

LEDs and buttons ....................................................................................................................... 19

Both button functions .................................................................................................................. 19

Setting a base to logon mode ................................................................................................ 19

Resetting the device to the factory default ............................................................................ 19

LED 1: Gigaset M101 Data status ................................................................................................ 19

LED 2: data transfer ..................................................................................................................... 19

What happens if... ...................................................................................................................... 20

Notes on installation and operation .............................................................................................. 20

Place of installation ................................................................................................................ 20

Temperature and ambient conditions .................................................................................... 21

Technical data .............................................................................................................................. 21

The V.24 interface ........................................................................................................................ 22

Why set a mode? Technical background ............................................................................... 23

Contents

giga_m101.IVZ

14.4.99 Gigaset M101 Data, eng/deut: A30853-X400-B104-3-74D1

Tips & tricks, settings ................................................................................................................ 24

Operating from a local station with two remote stations: ............................................................ 24

PC-PCdirect cable connection: via RS232/V.24 interface .......................................................... 25

Setting the direct connection to the correct baud rate .......................................................... 26

Sharing files ........................................................................................................................... 32

PC-PC direct cable connection problems: examples ..................................................... 33

MAC and other operating systems .............................................................................................. 33

Meaning of "local station" and "remote station" ............................................................................ 33

Meaning of "base" and "extension" ............................................................................................... 33

Meaning of local, remote ............................................................................................................. 33

Support ......................................................................................................................................... 34

Updates and news on the Internet ........................................................................................ 34

Notes on sending faxes directly from the PC ............................................................................... 34

Configuration management ................................................................................................... 35

Problems with application programs: .................................................................................... 35

Hardware problems (PC, modem, ISDN TA.): ....................................................................... 36

Miscellaneous ........................................................................................................................ 37

Updates and news on the Internet

Visit our site at:

www.siemens.com/pc-communication-support

(always under construction)

gigam101.fm5

21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1

Approval and conformity

Your Siemens Gigaset M101 Data has been certified by the Ger-

man Federal Office of Telecommunication Approval (BZT). This

equipment has been approved in accordance with the EU direc-

tive 91/263/EC Telecommunication Terminals.

This data terminal complies with the requirements of the EU di-

rectives:

Notes on PC and modem operation

Notes on Gigaset Repeater

89/336/EC EMC Directive

72/23/EC Low Voltage Directive

and thus carries the CE mark.

When using a modem, software malfunctions in the PC

(e.g. an operating system crash or program errors in the

application software) can prevent the cleardown of a

modem connection from a telephone line. You incur

connection costs for trunk lines that you seize!

Since your Gigaset M101 Data only replaces a serial ca-

ble,malfunctionsofthiskindcanalsooccurhere.Ifsuch

a problem occurs, check the status of your modem and,

if applicable, reset it.

Inthecaseof one-sided interruption ofthemainssupply

or complete interruption of your Gigaset M101 Data’s

hop, the interface’s status lines are reset to the initial

status in the partner station within 2 minutes (a modem

then clears down the connection).

Whenever possible, operate the station registered as

user at your PC (lokale Station), since any malfunctions

on the user side can be displayed, for technical reasons,

more quickly than at the base, see "LEDs and buttons"

on page 19.

Should the graphic or sound card be affected by interfer-

ence from Gigaset M101 Data, rotate Gigaset M101

Data until the interference is removed.

The Gigaset Repeater cannot be used to extend the

radio range.

Therepeaterwas designed for usebehind Gigaset 2000

base stations.

Introduction

gigam101.fm5

21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1

Introduction

What is a Gigaset M101 Data?

Your Gigaset M101 Data is a cordless V.24/RS232 serial inter-

face consisting of two stations: the lokalen Station and the Part-

nerstation.

The station connected to the PC is known as the "lokale Station".

The "Partnerstation"is connected to a peripheral device, e.g. a

modem.

The connection between the PC and the peripheral device is

routed via the radio link between the lokalen Station and the

Partnerstation.

In addition to both stations, the application features a configura-

tion program.

Of the two stations,

●one is a "Basis" type station; this is usually the Partnersta-

tion,

●the other is a "Teilnehmer" type station; this is usually the

lokale Station.

All Gigaset M101 units are "Basis" type stations by default.

When the device is configured for the first time, the Gigaset

M101 Data connected to the PC automatically switches to a

"Teilnehmer" type station. The Teilnehmer station must be reg-

istered at the Basis station.

Every Gigaset M101 Data can be operated either as a lokale Sta-

tion or as a Partnerstation.

Safety precautions

Local station Partner station

Radio link

Research has shown that in certain cases, medical

equipment can be affected by activated DECT devices.

A distance of at least one metre should therefore be

maintained between Gigaset M101 Data and the medi-

cal equipment. When using cordless telephones in the

vicinity of medical equipment, the regulations of the rel-

evant institution must be observed.

Only use the power supply unit supplied (C39280-Z4-

C59/C39280-Z4-C168).

Putting into service

gigam101.fm5

21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1

Putting into service

Followthestep-by-step instructions describedbelowfor putting

the equipment into service:

1.Check the contents of the package

2. Install the configuration program

3. Connect the station

4. Conclude commissioning by performing an initial configura-

tion, see "Initial configuration" on page 11.

Checking the contents of the package

Important

The package contains: M101

Data Twin

Pack

Gigaset M101 Data 1 2

Plug-type AC adapter C39280-Z4-C59/

C39280-Z4-C168 for mains connection 1 2

Serial 9-pin connection cable for connecting

the V.24/RS232 interface 1 2

CD-ROM with the installation program 1 1

Operating instructions 1 1

Before you put the Gigaset M101 Data into service, the

peripheral device that you want to operate as a cordless

unit (modem, PABX) must be configured at the COM

port on the PC side since it is to be used for transferring

data. For information on configuration, see the appropri-

ate documentation on the peripheral device and your

computer’s operating system. This configuration is par-

ticularly necessary for plug&play installations, as other-

wise errors can occur depending on the installation rou-

tine of the connected peripheral unit.

If you want to operate a modem, for example, via the ra-

dio link, first connect the modem directly to the PC, con-

figure it, set up a test connection, and then install the ra-

dio link. To do this, disconnect the modem from the PC,

connect the Gigaset M101 Data and perform the config-

uration.

When choosing a location for the devices, read the

"Notes on installation and operation" on page 20.

Putting into service

gigam101.fm5

21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1

Installing the program package

Prerequisites for installation

For installation, you need:

●an IBM-compatible PC with the following configuration:

–Win 95, Win 98 or Win NT operating system

–2 MB free hard disk memory

–1 free V.24/RS232 serial interface as

COM port

●the diskette/CD-ROM containing the installation program

Installation

●Start up the PC and close down any programs active after

start-up.

●Disconnect any Gigaset M101 Data units from the power

supply and the PC.

●Insert the data carrier supplied in the drive.

●Under Start, select Settings, then Control Panel. Double-

click the Software icon.

●Select Install. The installation program starts. During instal-

lation, the message "No Gigaset M101 Data connected".

Confirm this message with "OK".

●Terminate the configuration program with "OK"; this con-

cludes the installation operation.

Check installation is successful

The following errors can occur during installation:

If no errors occur, all files are installed in the selected language

version and your PC contains a "Gigaset M101 Data" program

group. This contains the "Set Gigaset" configuration program, a

help function and a text file with current information.

Problem Result

Insufficient memory Error message, please try free-

ing some disk space on your

hard drive.

No COM port free at the

PC Error message, setup can be

completed.

Installation interrupted by

user All components already in-

stalled are removed.

PC crashes during

installation Automatic correction during

next attempt.

Installation of a new

version Recognition, warning and instal-

lation after confirmation.

Putting into service

gigam101.fm5

21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1

Connecting stations

●To avoid damaging your Gigaset M101 Data and the PC, the

V.24/RS232 cable should only be connected when the pow-

er supply is switched off.

●Connect a Gigaset M101 Data to the V.24/RS232 interface

of the PC (COM port). Some V.24 plugs have a plastic pro-

trusion and cannot be properly arrested. If this is the case,

use the cable supplied as an extension.

●Connect both stations to the plug-type AC adapters

(C39280-Z4-C59/C39280-Z4-C168) and insert these adapt-

ers in 230V AC 50Hz sockets.

You can now perform initial configuration, see "Initial configura-

tion" on page 11.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Gigaset Netzwerk-Hardware Handbücher

Gigaset

Gigaset N720 IP PRO Montageanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung