GL-INET GL-B1300 Bedienungsanleitung
ver. 20171218.1
HOME AC ROUTER
Press and hold for 3 seconds then release to repair your network.
Press and hold for 10 seconds then release to reset the router
to factory settings. All user data will be cleared.
If you cannot access the web-based setup page or cannot connect to the router,
you can press the Reset button:
Repair / Reset
HARDWARE
Mesh
GL-B1300 AC router
Ethernet cable
12V/1.5A power adapter
User guide
Package Contents
When powered up, your router will broadcast a
Wi-Fi signal with the SSID: GL-XXXXX-xxx.
Visit http://192.168.8.1 in your browser to set up your
router; start by choosing your preferred language.
Plug the Internet
cable into WAN
Power In
Power
FIRST-TIME SETTINGS
Data In
Power In
After you have set up your router, you will see the main web interface. Find
the Internet Settings icon, then click the New Connection button. Choose
Cable from the pop-up Internet Settings window.
The default protocol is DHCP. If your network needs a static
setting, you can change it to Static.
Data In
INTERNET SETTINGS
Power In
Sub Router2
Pair routersPlug in power & Internet cable Mesh network
You can pair two routers by pressing their Mesh Buttons at the same time. The pairing
starts right after their Mesh LED lights start blinking. After 2 minutes, their mesh lights
will be solid indicating the mesh network is ready. You can pair another router with the
main router by following above steps.
The mesh network works among routers when their Mesh LED lights are solid. Home
materials and layout can affect how Wi-Fi signal travels. You might need extra
routers to get full Wi-Fi coverage if you have a long narrow layouts and thick walls.
If you have more than one GL-B1300 router, you can set up a mesh network. In a mesh network, the routers will
share same Wi-Fi names (SSID) for 2G and 5G Wi-Fi networks.
WAN
MESH NETWORK SETTINGS
By default, the router with Ethernet cable plugged into its WAN port is the main router. You need to reset the router to change
your main router or release a router used to be in a mesh network.
Power In
Blinking - mesh network is setting up
Off - mesh network is off
Solid - mesh network is ready
WAN 2G + 5G
2G + 5G
2G + 5G
Power In
Main Router Main Router Main Router
Power In
Sub Router1
The router with Ethernet cable plugged into its WAN port is the Main Router. The other routers without
Ethernet cables are Sub Routers.
Sub Router1
Sub Router1
Sub Router2
WIRELESS SETTINGS
GL-XXX-xxx
173M
GL-XXX-xxx-5G
866M
ON
ON Mode
Channel
SSID
Encryption
Password
173M(11ng)
Auto
GL-XXX-xxx
WPA/WPA2 Mixed
AP 2.4G AP 5G
Wireless Settings LAN IPSetting
Wi-Fi Name
Wi-Fi Password
On the Wireless Setting page, you can change your Wi-Fi Name (SSID) and Wi-Fi Password to increase the security of
your router. New changes will be in effect after you click Submit.
Find the Wireless Settings icon, then click the Setting button. The Wireless Settings window will pop up.
It is NOT recommended to turn off your wireless network when you are connecting to your router wirelessly. Otherwise, all wireless
connections to your router will be cut off immediately. To use the hotspot again, you can plug your router into a computer and turn on the
Wi-Fi, or you can repair the network (See Hardware).
Click here to select files or drag and drop them here: .ovpn .zip .tar .gz
Some of your ovpn files need a username, a passowrd and a
passphrase. Please submit yours to authenticate these files.
After uploading the ovpn files, the router will check them. If
you are prompted for a username and password, or a private
key passphrase, or both, a window for VPN Authentication
will pop up so that you can Submit these information for all
files you upload.
This may not be necessary for some service providers.
This router supports OpenVPN client. Using OpenVPN will slow down your Internet
speed because of data encryption.
Click the OpenVPN icon and go to the VPN setting page. The first time it will ask
you to upload your OpenVPN client configuration (ovpn files). Usually, you can
download it from your OpenVPN service provider’s website or console. Consult your
service provider for more details.
OPENVPN CLIENT
To protect against DNS leaks, you must customize your DNS servers. You can enable Force all clients to override the
DNS server settings for your client devices. To customize your DNS server, go to Internet Settings > Custom DNS
To get more detailed instructions or information about compatible VPN service providers, please visit http://gl-inet.com/docs/
Using above DIY features might have a risk of bricking your router. We have no obligation to provide support, maintenance,
upgrades, modifications, or new releases on DIY features. We reserve the rights of interpretation on above DIY contents
without further announcement.
DDWRT official firmware is not available for GL.iNet models except for GL-AR150 mini router. For further
information, please visit https://www.dd-wrt.com
DIY GUIDANCE
深圳市广联智通科技有限公司
深圳市宝安区石岩街道松白路创维数码大厦305-306室( +86-0755-86606126 )
SUPPORT
Inhaltsverzeichnis
Andere GL-INET Netzwerk-Router Handbücher
GL-INET
GL-INET Convexa-B Bedienungsanleitung
GL-INET
GL-INET GL-MT300N-V2 Series Bedienungsanleitung
GL-INET
GL-INET GL-AX1800 Bedienungsanleitung
GL-INET
GL-INET GL-MiFi Handbuch
GL-INET
GL-INET GL-AXT1800 Bedienungsanleitung
GL-INET
GL-INET GL-MiFi Bedienungsanleitung
GL-INET
GL-INET Amarok GL-X1200 Bedienungsanleitung
GL-INET
GL-INET Opal Bedienungsanleitung
GL-INET
GL-INET GL-X300B Bedienungsanleitung
GL-INET
GL-INET GL-USB150 Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise