Glacier bay HD873X-5D35 Montageanleitung

THANK YOU

INSTALLATION AND CARE GUIDE

DORIND SINGLE-HANDLE 1-SPRAY

TUB AND SHOWER FAUCET

We appreciate the trust and conﬁdence you have placed in Glacier Bay through the purchase of this tub and

shower faucet. We strive to continually create quality products designed to enhance your home. Visit us online

to see our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!

Questions, problems, missing parts?

Before returning to the store, call Glacier Bay Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

1-855-HD-GLACIER (1-855-434-5224)

HOMEDEPOT.COM

HOMEDEPOT.COM 6/2021 REV.01

Model#

HD873X-5D01

HD873X-5D04

HD873X-5D10H

HD873X-5D4405

HD873X-5D35

SKU#

1005877845

1005877848

1005877847

1005877850

1006462874

Internet#

315055926

315055920

315055925

315055919

317147249

Table of Contents

Important Information..............................2

Warranty ...................................................2

Pre-Installation.........................................3

Planning Installation ..............................3

Package Contents ..................................6

Installation................................................7

Care and Cleaning ....................................14

Troubleshooting........................................15

Service Parts

...........................................

Important Information

□ Do not install this product until you read and understand the instructions in this manual. If you are installing this

product for someone else, leave this manual for the owner’s/ user’s reference.

□ Inlet ports are designed to allow for 1/2 in. COPPER tubing solder connection or 1/2 in. IPS threading coupling

connection. For threaded connections, wrap sealant tape around threaded ends before connecting. If soldering

connections, certain inﬂammable parts should be removed prior to the soldering in order to avoid heat damage.

If you are unsure how to properly remove these parts, please call us at 1-855-HD-Glacier.

□ Protect your eyes with safety glasses when cutting or soldering water supply lines.

□ NOISE AND WATER HAMMER IN PEX SYSTEMS: Due to the inherent ﬂexibility of PEX compared with metallic

plumbing materials, water hammer and noise can sometimes occur from the pressure surges. It is important to

ensure the tubing is not in contact with wallboard, forced air ducts or other high-resonance materials. Clamping

or strapping can help prevent these noises. DO NOT USE PEX tubing from the valve to the tub spout.

Tools and Hardware Required ...............3

Warranty

LIMITED LIFETIME WARRANTY

Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our

limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of

defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.

Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-434-

5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer

purchaser must be made available for all Glacier Bay warranty claims.

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and

tear. This warranty excludes all industrial, commercial and business usage, whose purchasers are hereby extended

a ﬁve year limited warranty from the date of purchase, with all other terms of this warranty applying except the

duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitations may not apply to you. This warranty gives you speciﬁc legal rights and you may also have other

rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for

more details.

Contact the Customer Service Team at 1-855-434-5224 or visit www.HomeDepot.com.

Safety

goggles

Thread

sealant tape

Tube

cutter

Strap wrench

Adjustable

wrench

Measuring

tape Thermometer

Phillips

screwdriver

Flathead

screwdriver

SILICONE

Silicone

sealant

Pre-Installation

PLANNING INSTALLATION

Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package

Contents list. If any part is missing or damaged, do not attempt to install the product. Contact Customer Service

for replacement parts.

TOOLS AND HARDWARE REQUIRED

ADVANCED INSTALLATION: Consult a plumber or

professional before installing this product.

If you are replacing your plumbing valve, please review the four common plumbing methods illustrated below:

COPPER, IPS, PEX and CPVC. Remove the existing handle and valve trim before replacing your valve. Please follow

all local building and plumbing codes.

A. COPPER (Before soldering, remove the cartridge & stop valves from the valve)

Torch Lead-free solder Kit

Key

hole saw

Wire

brush

All installations can vary depending on how your previous faucet was installed. Not all supplies for faucet

installation are included; however, they are available wherever plumbing supplies are sold. When choosing your

installation supplies, make sure they are UPC and/or CSA approved products.

Flashlight

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Pre-Installation (continued)

Safety

goggles

Thread

sealant tape

Tube

cutter

Strap wrench

Adjustable

wrench

Measuring

tape Thermometer

Phillips

screwdriver

Flathead

screwdriver

SILICONE

Silicone

sealant

B. IPS

Key

hole saw

Flashlight

C. PEX+COPPER

Safety

goggles

Thread

sealant tape

Tube

cutter

Strap wrench

Adjustable

wrench

Measuring

tape Thermometer

Phillips

screwdriver

Flathead

screwdriver

SILICONE

Silicone

sealant

Key

hole saw

Flashlight

Full circle

crimping tool

Pipe

wrench

COPPER COPPER

Pre-Installation (continued)

D. CPVC+COPPER

Safety

goggles

Thread

sealant tape

Tube

cutter

Strap wrench

Adjustable

wrench

Measuring

tape Thermometer

Phillips

screwdriver

Flathead

screwdriver

SILICONE

Silicone

sealant

Key

hole saw Flashlight

CPVC

cleaner

CPVC

cement

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

COPPER COPPER

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity

B Shower arm 1

C Shower head 1

D Valve body 1

E Installation plate 1

F Escutcheon 1

G Handle assembly 1

Shower ﬂange

L 2.5mm hex wrench 1

J Plug 1

K Tub spout 1

H Screw 2

I Plaster guard 1

Installation

1 Preparing for installation

CAUTION: Always shut off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

2Installing the valve body and

removing the plaster guard

□Shut off the water supply to the tub and

shower.

□Verify that the hole sizes and positions of the

holes in the wall are correct

□The shower and tub spout outlet holes

should be 1-1/4 in. diameter.

□Refer to Step 2 for valve access hole

dimensions.

□The recommended valve depth to the

ﬁnished wall is 2-1/2 in. min. to 3 in. max.

□Ensure that the valve body (D) cover is ﬂush

with the ﬁnished exterior surface of the wall.

Position the valve body (D) correctly in the

wall with the side marked "UP" pointing up. The

8 in. minimum from the valve body (D) to the tub

spout (K) is required for proper operation.

The plaster guard (I) is positioned so that it is

ﬂush with the ﬁnished wall. This ensures that

the valve will be at the correct position to accept

the trim. The depth for the valve body (D) in wall

is measured from the center of the shower outlet

to the ﬁnished wall surface. The accepted depth

distance is 2-1/2 in. to 3 in..

□

Unscrew the screws (H), and remove the plaster

guard (I).

□

NOTE: Be sure to position the valve body (D) correctly in

the wall, with the side marked "UP" facing upward.

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

30 in.

Tub & Shower

8 in. Min.

48 in.

Shower Only

1 1/4 in. Diamter

1 1/4 in. Diameter

48 in.

Tub & Shower

Refer to

the step 2

30 in.

Shower Only

2-1/2 in. to 3 in.

Finished wall

6 in. dia.

Installation (continued)

3a Installing the supply

connections

□

□Tighten the pipes to the valve body (D) with a

pipe wrench (not included).

Wrap thread sealant tape (not included) around

the pipe threads in a clockwise direction, as

shown.

□

Connect the hot and cold water supply lines (1,

not included), the shower outlet pipe (2, not

included), and tub outlet pipe (3, not included)

by threading them into the valve body (D) in a

clockwise direction.

Connect the pipe elbows (4, not included) to

the end of the shower outlet and tub outlet

pipes.

□

NOTE: The hot water supply lines go into the "H" inlet, and

the cold water supply lines go into the "C" inlet. Do not use

PEX or CPVC between the valve body (D) and tub spout (K).

NOTE: If you do not wish to install the tub outlet, insert

the plug (J) into the bottom of the valve body (D).

3b Installing the supply

connections (for soldering)

□

Before soldering, remove the bonnet nut (1),

cartridge (2), o-ring (3) and stop valves (4) from

the valve body (D).

□

Solder the hot and cold water supply lines (5,

not included), the shower outlet pipe (6, not

included), and tub outlet pipe (7, not included)

into the valve body (D) with the torch.

Solder the pipe elbows (8, not included) to the

end of the shower outlet and tub outlet pipes

with the torch.

□

Reinstall the bonnet nut, cartridge, o-ring and

stop valves onto the valve body (D). Make sure

the cartridge (2) is installed correctly.

□

NOTE: The hot water supply lines go into the "H" inlet, and

the cold water supply lines go into the "C" inlet. Do not use

PEX or CPVC between the valve body (D) and tub spout (K).

NOTE: If you do not wish to install the tub outlet, insert

the plug (J) into the bottom of the valve body (D).

Installation (continued)

5Flushing the water outlets

□

and checking for leaks

Attach the handle assembly (G) by threading the

base of the handle assembly (G) onto the valve

body (D) and turn the handle assembly (G) to the

full on mixed position. Turn on the hot and cold

water supply lines and allow the water to ﬂow

from the outlets for one minute, or until all foreign

matter has been ﬂushed out. Check for leaks.

Shut off the water at the faucet and supply lines.

Check for leaks. Remove the handle assembly (G).

□

Make sure the stop valves (1) are fully open.

If the stop valves (1) are closed, you must fully

open the stop valves (1) with the ﬂathead

screwdriver.

□

4Back to back installation

NOTE: Never install the valve body (D) upside down!

□If the hot and cold inlets are reversed (hot on

right and cold on left), remove bonnet nut (1)

from the valve body (D) with reversed supply

connections. Rotate the cartridge (2) 180°,

so H appears on the right. Install the cartridge

making sure that the key is fully engaged with

the slot in the valve body (D). Slide the bonnet (1)

over the cartridge (2) and thread them onto the

valve body (D). Hand tighten securely. If you are

not making a reverse or back to back installation,

skip this step and continue with the step 5.

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

NOTE: Check for leaks：

a. Turn off the integral stops, check if there are any leaks

on both of the inlet water supply connections.

b. Fully turn on the integral stops and use plug/cap to

block the outlets of shower head and spout, then turn on

the water and check if there are any leaks on the outlet

pipe/tube connections or elbows.

Normal

installation

(changes

not required)

Reverse

installation

Reverse installation

Hot

Cold

Hot

Normal installation

Hot Cold

Installation (continued)

7 Installing the shower arm

□Insert the long end of the shower arm (B) through

the shower ﬂange (A), and wrap thread sealant

tape (not included) around the long end of the

shower arm (B) in a clockwise direction, as

shown.

Install the long end of the shower arm (B)

into the pipe elbow inside the wall. Carefully

tighten the shower arm (B) with a clean strap

wrench. Do not over tighten.

□

Wrap thread sealant tape around the pipe

threads of the tub spout outlet (1, not included)

in a clockwise direction, as shown.

□

Connect the tub spout outlet pipe (the tub

spout outlet pipe should project 2-1/2 in. to 3 in.

from the ﬁnished wall) to the lower pipe elbow

(2, not included). Tighten the elbow and tub spout

outlet pipe connections with a strap wrench.

□

6 Installing the plaster guard

Place the plaster guard (I) onto the valve body (D)

and secure with the screws (H).

□

NOTE: Be sure to position the plaster guard (I) correctly

onto the valve body (D), with the side marked "SHOWER"

facing upward.

2 1/2 in. to 3 in.

Wall

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Glacier bay Küchen- und Badezimmerausstattung Handbücher

Glacier bay

Glacier bay MCKENNA HD67726W-120602 Montageanleitung

Glacier bay

Glacier bay HD65601-5101 Montageanleitung

Glacier bay

Glacier bay 67536-0508D2 Montageanleitung

Glacier bay

Glacier bay HD67799-1001 Montageanleitung

Glacier bay

Glacier bay HD65601-5001 Montageanleitung

Glacier bay

Glacier bay HDDB332264 Bedienungsanleitung

Glacier bay

Glacier bay FP4AF263CP Montageanleitung

Glacier bay

Glacier bay VDR2522A1 Bedienungsanleitung

Glacier bay

Glacier bay HD67858-0008D2 Montageanleitung

Glacier bay

Glacier bay 461-3001 Montageanleitung

Glacier bay

Glacier bay HD67522X-5201 Montageanleitung

Glacier bay

Glacier bay HD67495-1008D2 Montageanleitung

Glacier bay

Glacier bay 67737-0001 Montageanleitung

Glacier bay

Glacier bay MCKENNA HD67737-3001 Montageanleitung

Glacier bay

Glacier bay MARKET HD67737-1201 Montageanleitung

Glacier bay

Glacier bay 67556-0001 Bedienungsanleitung

Glacier bay

Glacier bay 4124F Bedienungsanleitung

Glacier bay

Glacier bay HD67496-1001 Montageanleitung

Glacier bay

Glacier bay MELINA HD67568-1201 Montageanleitung

Glacier bay

Glacier bay HD67573W-6001 Montageanleitung

Glacier bay

Glacier bay ACS3021A1Q Bedienungsanleitung

Glacier bay

Glacier bay 67385-1108D2 Bedienungsanleitung

Glacier bay

Glacier bay HD67568-1101 Montageanleitung

Glacier bay

Glacier bay F51AC074CP Montageanleitung

Beliebte Küchen- und Badezimmerausstattung Handbücher anderer Marken

Grohe

Grohe BRIDGEFORD 33 870 Bedienungsanleitung

Hans Grohe

Hans Grohe Zenio Metro 31811000 Bedienungsanleitung

Gröne

Gröne Zedra 32 555 Bedienungsanleitung

Transform

Transform QL045 Bedienungsanleitung

Sanela

Sanela SLU 09PTB Bedienungsanleitung

Lefroy Brooks

Lefroy Brooks C1-1400 Montageanleitung

Grohe

Grohe Rapido E Bedienungsanleitung

Danze

Danze D302455 Bedienungsanleitung

Waterworks

Waterworks CEKM30 Merkblatt

Helvex

Helvex Omega TV-298 Bedienungsanleitung

Tribata.

Tribata. GEORGIAN G5393 Bedienungsanleitung

Alpha Bidet

Alpha Bidet Alpha One Bedienungsanleitung

InSinkErator

InSinkErator H/HC3300 Installationshandbuch

Clou

Clou Xo type 1 Bedienungsanleitung

Kohler

Kohler Contra 26448T-4 Bedienungsanleitung

Grohe

Grohe Bridgeford 20 158 Bedienungsanleitung

Hans Grohe

Hans Grohe Croma Select S 180 Showerpipe EcoSmart... Bedienungsanleitung

Wickes

Wickes MONO SINK MIXER Bedienungsanleitung