Glacier bay Belle Foret 67416-3C01 Montageanleitung

THANK YOU

INSTALLATION AND CARE GUIDE

TWO-HANDLE ROMAN TUB FAUCET

We appreciate the trust and condence you have placed in Belle Forêt through the purchase of this roman tub

faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see

our full line of products available for your home improvement needs. Thank you for choosing Belle Forêt!

4/2016 REV.01YOW

Model#

67416-3C01

67416-3C04

67416-3C27H2

SKU#

718728

718731

718730

Questions, problems, missing parts?

Call Belle Forêt Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

(800) 880-8164

Phillips

screwdriver Basin

wrench

Table of Contents

Important Information..............................2

Warranty ...................................................2

Pre-Installation.........................................2

Planning Installation ..............................2

Package Contents..................................3

Installation................................................4

Care and Cleaning ....................................7

Troubleshooting........................................7

Service Parts

...........................................

Important Information

□ Observe all local plumbing and building codes.

□ Cover the sink drain to avoid losing any parts.

□ Review the care and cleaning section included in this guide.

Pre-Installation

PLANNING INSTALLATION

Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package

Contents list. If any part is missing or damaged, do not attempt to install the product. Contact customer service

for replacement parts.

TOOLS AND HARDWARE REQUIRED

Adjustable

wrench

Safety

goggles

(2) Supply

lines

Tools and Hardware Required ...............2

Operation...................................................7

Warranty

LIMITED LIFETIME WARRANTY

Belle Forêt products are manufactured with superior quality standards and workmanship and are backed by our

limited lifetime warranty. Belle Forêt products are warranted to the original consumer purchaser to be free of

defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that prove defective.

Simply, call (800) 880-8164 to receive the replacement item. Proof of purchase (original sales receipt) from the

original consumer purchaser must be made available for all Belle Forêt warranty claims.

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and

tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended

duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other

rights that vary from state to state and province to province. Please contact (800) 880-8164 for more details.

Pre-Installation (continued)

PACKAGE CONTENTS

Please contact (800) 880-8164 for further assistance.

Part Description Quantity

EProtective cap 1

FConnector 1

G 1

HRubber washer 1

Middle body

IMetal washer 1

JMounting nut 1

KHandle 2

LSet screw 2

Part Description Quantity

KLM

ASpout assembly 1

BSet screw 1

C2.38mm hex wrench 1

DIndex 1

QFlange 2

RHot end valve 1

S 1

TRubber washer 2

Cold end valve

UMetal washer 2

VMounting nut 2

WHose 2

M2.5mm hex wrench 1

NFlange 2

OConnector 2

PProtective cap 2

Installation

1 Preparing for installation

CAUTION: Always turn off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

2 Removing the protective cap

□Remove the protective cap (E). Loosen the

connector (F) from the middle body (G). Adjust

the rubber washer (H), metal washer (I) and

mounting nut (J) to the bottom of middle body (G).

□Shut off the water supply. Remove the old

faucet.

□Clean the mounting surface.

□Drill 1-3/8 in. holes in the nished deck as

shown in the diagram below.

5 in. min.

8~16 in.

3 in. min.

1-1/4 in. MAX. DECK THICKNESS

1-3/8 in.

Diamter

1-1/8 in.

Diamter

1-3/8 in.

Diamter

NOTE: This kit allows up to 1-1/4 in. deck thickness.

3 Installing the middle body

□From underneath the deck, insert the middle

body (G) with the rubber washer (H), metal

washer (I) and mounting nut (J) through the

mounting hole.

□From above, thread the connector (F) onto

the middle body (G).

□Tighten the mounting nut (J) using a basin

wrench, so that the connector (F) sits ush

against the nished deck surface.

Installation (continued)

4 Removing the protective caps

□Remove the protective caps (P). Loosen the

anges (Q) from the valve bodys (R & S). Adjust

the rubber washers (T), metal washers (U) and

mounting nuts (V) to the bottom of valve

bodys (R & S).

5 Installing the valve bodies

□From underneath the deck, insert the cold end

valve (S) with the rubber washer (T), metal

washer (U) and mounting nut (V) through

the hole on the right (cold) side.

□From above, thread the ange (Q) onto the

valve body (S).

□Tighten the mounting nut (V) using a basin

wrench, so that the ange (Q) sits ush against

the nished deck surface.

Please contact (800) 880-8164 for further assistance.

□Repeat this procedure for the hot end valve (R)

on the left (hot) side.

6 Connecting the hoses

□Connect the hoses (W) to the bottom of the hot

and cold end valves (R & S), as shown.

□Align the middle body (G) in a position that will

allow maximum clearance to connect the

hoses (W).

□Carefully bend the hoses (W) to t in the

available space, and carefully thread the hose

(W) couplings onto the sides of the middle

body (G). Tighten all connections with a wrench.

Installation (continued)

7 Installing the spout assembly

□Install the spout assembly (A) onto the

connector (F). Be sure the spout assembly (A)

is resting rmly on the deck.

□Push down on spout assembly (A) and tighten

set screw (B) with the Hex wrench

(Hex: 3.2mm, C). Insert the index (D).

8 Installing the handle

□Thread the connector (O) onto the cartridge

stem (1). Thread the ange (N) onto the ange (Q).

Place the handle (K) onto the connector (O). Place

the set screw (L) into handle (K) and tighten set

screw (L) with the Hex wrench (Hex: 2.5mm, M).

9 Making the water supply

connections

□Connect the water supply lines (1) to the

faucet inlets (2). (Supply lines are not

included.)

□Place the other handle onto the left (hot) valve

and install the same way.

Please contact (800) 880-8164 for further assistance.

Operation

1Flushing and checking for leaks

□Ensure the faucet handles are in the off position,

and turn on the water supply and check for leaks.

If you discover any leaks, check your connections

to ensure they are installed properly.

□Turn on the hot and cold handles to allow the

water to run for at least one minute. This

ushes away any debris that could cause

damage to internal parts.

□Turn off the water.

Care and Cleaning

□To clean, wipe down with a damp cloth and dry with a towel.

□Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will

be voided.

Troubleshooting

Problem Possible Cause Solution

There are leaks from the

handle.

The bonnet nut has come loose and/or the

washer is dirty or damaged.

□Tighten the bonnet nut.

□Clean or replace the washer.

The water will not shut off

completely.

The cartridge is dirty or broken. □Remove the handle to check

the cartridge.

□Clean or replace.

NOTE: Refer to the service parts section in this manual for

a detailed drawing showing the location of the parts listed

below.

There is a leak from the

spout base when the

faucet is on.

The o-ring which is on the connector

under the spout is worn.

□Remove the spout and replace

a new o-ring.

Service Parts

*Specify Finish

Faucet ID tags can be

found by removing

the hot water handle

19 Rubber washer RP64035

Part Description Part Number

O-ring RP60094

Part Description Part Number

Connector RP70459

1RP50054

2 Index RP80534

Handle C RP13452*

Set screw RP50002

Flange RP80533*

Set screw

Flange RP70549

O-ring RP60098

Bonnet nut RP70001

Connector RP50003

11 Cartridge H RP20067

Metal washer RP64024

Mounting nut RP56014

Handle H RP13451*

Rubber washer RP64023

O-ring RP60056

Hose RP70042

Mounting nut RP56088

20 Metal washer RP64036

Cartridge C RP2006812

21 14

Questions, problems, missing parts?

Call Belle Forêt Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

(800) 880-8164

Retain this manual for future use.

GRACIAS

GUÍA DE USO Y MANTENIMIENTO

Modelo núm.

67416-3C01

67416-3C04

67416-3C27H2

GRIFO DE DOS LLAVES PARA BAÑERA ROMANA

Agradecemos la con anza que has depositado en Belle Forêt al comprar este grifo para bañera romana. Nos

esforzamos por crear continuamente productos de calidad diseñados para mejorar tu hogar. Visítanos en Internet

para ver nuestra línea completa de productos disponibles para las necesidades de mejoras de tu hogar.

¡Gracias por elegir a Belle Forêt!

SKU núm.

718728

718731

718730

¿Problemas, preguntas o piezas faltantes?

Llama al servicio al cliente de Belle Forêt

de lunes a viernes entre 8 a.m. y 7 p.m. y los

sábados entre 9 a.m. y 6 p.m.(hora estándar del Este)

(800) 880-8164

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Glacier bay Sanitärprodukte Handbücher

Glacier bay

Glacier bay 20173-0310H Bedienungsanleitung

Glacier bay

Glacier bay HDQF51A1153BNV Montageanleitung

Glacier bay

Glacier bay ARNETTE HD67095W-6410H Montageanleitung

Glacier bay

Glacier bay HD67877W-6001 Montageanleitung

Glacier bay

Glacier bay HD67732W-609006 Montageanleitung

Glacier bay

Glacier bay HD51901-X0001 Bedienungsanleitung

Glacier bay

Glacier bay HD67530W-6201 Montageanleitung

Glacier bay

Glacier bay 65710N-B8401 Montageanleitung

Glacier bay

Glacier bay 873-6204 Bedienungsanleitung

Glacier bay

Glacier bay HD67392W-6027D Montageanleitung

Glacier bay

Glacier bay 852N-05501 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67331W-6104 Montageanleitung

Glacier bay

Glacier bay HD67249W-103402 Montageanleitung

Glacier bay

Glacier bay F8FA0000BNV Montageanleitung

Glacier bay

Glacier bay HD67623W-6201 Montageanleitung

Glacier bay

Glacier bay PRITCHARD HD67080W-1001 Montageanleitung

Glacier bay

Glacier bay VT3322TA0ACC Bedienungsanleitung

Glacier bay

Glacier bay GBSH114 Bedienungsanleitung

Glacier bay

Glacier bay MODISH HD67071W-6001 Montageanleitung

Glacier bay

Glacier bay HD67559-0A08D2 Montageanleitung

Glacier bay

Glacier bay FW0C4100CP Montageanleitung

Glacier bay

Glacier bay HDQFP4F0005CP Montageanleitung

Glacier bay

Glacier bay HD59650-0001 Bedienungsanleitung

Glacier bay

Glacier bay HD67701W-6001 Montageanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema