Global Fire Equipment MPX-SNDR-DG - 4 V2 Bedienungsanleitung

MPX-SNDR-DG V2

SOUNDER MODULE WITH 4

AND 8 SOUNDERS OUTPUTS

MANUAL 210628

MADE IN PORTUGAL - EU

GLOBAL FIRE EQUIPMENT S.A.

Sítio dos Barrabés, Armazém Nave Y, Caixa Postal 908-Z, 8150-016 São Brás de Alportel - PORTUGAL | Tel: +351 289 896 560

Email: info@globalfire-equipment.com | Technical Support: techs@globalfire-equipment.com | www.globalfire-equipment.com

TECHNICAL SPECIFICATIONS

SUPPLY VOLTAGE

24V DC to 30V DC

NORMAL OPERATION

6mA ( ) + 5.5mA per activated channel, 50mA on evacuation mode (all sounders) 𝐼𝑞

EOL RESISTOR

22K Ohms - 1/4 Watts

MAX. CABLE SIZE

2.5 mm²

COLOUR / CASE MATERIAL

White / ABS

OPER. TEMPERATURE / MAX. HUMIDITY

-10ºC to 50ºC / 95% RH Non-Condensing

DIMENSIONS / WEIGHT

150 (W) x 90 (L) x 32 (H) mm / 216 g inc. packaging

ORDER CODE

MPX-SNDR-DG - 4 V2

4 SOUNDER MODULE FOR ORION FAMILY

MPX-SNDR-DG - 8 V2

8 SOUNDER MODULE FOR ORION FAMILY

CONNECTIONS

Remove all power before connections!

Connections:

a. Direct connection (flat cable directly connected

to conventional panel).

i. Connect panel and MPX-SNDR-DG V2 using

molex flat cable.

ii. Set both communication jumpers UP

(option “panel”).

iii. Remove supply jumper.

iv. Power supply from Panel, ensure it won’t

exceed the maximum allowed current from this

source.

b. Remote connection (remote connection using an

interface module connected to panel).

i. Connect Interface and MPX-SNDR-DG V2 using

molex flat cable.

ii. Set both communication jumpers DOWN

(option “interface”).

iii. Fit the supply jumper. Power supply from

MPX-SNDR-DG V2.

EOL RESISTOR

Connecting EOL Resistor:

a. Place EOL resistor on the last audio

device.

b. All 8 channels need an EOL resistor.

SETTING DELAY CONFIGURATION

Setting Delay Configuration:

a. Set SW8 ON and the remain switches OFF.

b. Power up the system, both module LEDs should

blink intercalated.

c. Set the desired relay output by setting SW1,SW2

and SW3 as listed on the Relay Output table.

d. Set the desired delay by setting SW4,SW5, SW6 and

SW7 as listed on the Delay Value table.

e. Set SW8 down to save configurations.

MORE INFO >> GLOBALFIRE-EQUIPMENT.COM

Dieses Handbuch passt für folgende Modelle

Andere Global Fire Equipment Feueralarm Handbücher

Global Fire Equipment

Global Fire Equipment ZEOS-AD-S Bedienungsanleitung

Global Fire Equipment

Global Fire Equipment ORION Gebrauchsanweisung

Global Fire Equipment

Global Fire Equipment ZEOS-C Bedienungsanleitung

Global Fire Equipment

Global Fire Equipment JUNIOR V3 Handbuch

Global Fire Equipment

Global Fire Equipment ZEOS C Bedienungsanleitung

Global Fire Equipment

Global Fire Equipment VALKYRIE AS Bedienungsanleitung

Global Fire Equipment

Global Fire Equipment ORION EX MINI-REP Bedienungsanleitung

Beliebte Feueralarm Handbücher anderer Marken

Zeta Alarm Systems

Zeta Alarm Systems INFINITY ID2 Bedienungsanleitung

System Sensor

System Sensor 22051TLE-RF-26 Bedienungsanleitung

Pittway

Pittway Notifier AM2020 Bedienungsanleitung

Ampac

Ampac ZoneSense Bedienungsanleitung

Kidde

Kidde VM-1 Produkthandbuch

LST

LST SIM016-3 Bedienungsanleitung

Fireboy- Xintex

Fireboy- Xintex FBD-MZ Originalbetriebsanleitung

bolid

bolid S2000-IP-03 Bedienungsanleitung

GST

GST DI-9204 Bedienungsanleitung

E2S

E2S BExTBG05D Bedienungsanleitung

Notifier

Notifier UZC-256 Bedienungsanleitung

Fire-Lite Alarms

Fire-Lite Alarms MS-2 Bedienungsanleitung

Siemens

Siemens FDOOT221 Bedienungsanleitung

hyfire

hyfire HY5000 Series Bedienungsanleitung

FlameStop

FlameStop PFSIFP8 Bedienungsanleitung

Radionics

Radionics Radionics 9124 Bedienungsanleitung

UniPOS

UniPOS FD 7120 Bedienungsanleitung

FIREWOLF

FIREWOLF FW-C01224 Bedienungsanleitung