GLP Impression X1 Bedienungsanleitung

from software version: 1.0

[email protected]

www.glp.de

Instruction Manual

GLP German Light Products GmbH

impression X1 manual (v1.0) from software version: 1.0 2

Notes:

GLP German Light Products GmbH

impression X1 manual (v1.0) from software version: 1.0 3

Table of contents

1Description of Device..............................................................................................4

2Safety Instructions..................................................................................................5

3Mounting..................................................................................................................7

3.1.1 Operating on the Floor (Upright)..........................................................8

3.1.2 Mounting in hanging position...............................................................8

3.1.3 Mounting in sideways Position.............................................................9

3.2 Securing the Fixture........................................................................................10

3.3 Connections....................................................................................................10

3.3.1 Power Supply.....................................................................................10

3.3.2 NEUTRIK



powerCON ......................................................................10

3.3.3 DMX...................................................................................................11

4The Menu Field......................................................................................................12

5DMX Channel Selection (DMX Protocol) .............................................................14

5.1 Normal Mode (18 DMX channels)...................................................................14

5.2 Compressed Mode (14 DMX channels)..........................................................16

Maintaining and Cleaning.....................................................................................18

6.1 Safety regulations...........................................................................................18

6.2 Maintenance and Interval (rule-of-thumb).......................................................18

7Technical Specifications ......................................................................................19

8Dimensions............................................................................................................20

9Index.......................................................................................................................21

GLP German Light Products GmbH

impression X1 manual (v1.0) from software version: 1.0 4

1 Description of Device

1. Moving head (actively and passively

cooled)

2. Arm of device

3. LCD-Display/Menu (data entry)

4. Base with various connectors, air

in/outlets and mounting system

5. Fuse holder (on the bottom)

Base sideview:

baseside1

baseside2

8 9

6. Mains Out (powerCON grey)

7. DMX- Output (5-pin)

8. DMX- Input (5-pin)

9. Mains In (powerCON blue)

bottom view

GLP German Light Products GmbH

impression X1 manual (v1.0) from software version: 1.0 5

2 Safety Instructions

1. Before powering on the fixture, make sure that the fixtures fans and air

inlets are clean and not blocked.

2. Ensure that the fixture head can rotate unhindered throughout its complete

range of pan and tilt movement. A safety distance of at least 0.5 m must be

maintained between the fixture and any easily inflammable material (e.g.

decoration material).

3. Attention! Don’t touch the fixture during the operation. This can cause

injuries and/or damages.

4. The fixture doesn’t contain any user serviceable parts. Opening the

fixture will void all warranties.

5. It is necessary to wait at least 15 minutes after disconnecting the mains

power before handling the fixture.. Pay attention to possible hot parts of the

fixture.

The

is a High-Tech Product. To guarantee a

smooth operation, it is necessary to respect the following rules.

The manufacturer of this device will not take responsibility for

damages through any disregard of the information provided in

this manual. Warranty claims also will be voided in the case that

the fixture housing is opened.

Never look directly into the beam of light or into one of the

LEDs. Attention: LED Class 2M can cause injuries of your eyes

even without optical instruments in front of them or within a

distance of less than 0.5m and short exposure time.

Hence: Avoid direct radiation into your eyes!

WARNING:

Never let optical parts come in contact with alcohol,

solvents or similar cleaners.

GLP German Light Products GmbH

impression X1 manual (v1.0) from software version: 1.0 6

6. To ensure safe operation, follow also the Installation guide described in the

chapter below. Operating the

without suitable safety aids

like Safety cables or clamps/hooks can increase the risk of an accident and

must be avoided.

7. Repair, maintenance, and installation work shall be done by qualified or

GLP certified staff only. You need to pay attention to the common rules of

technology that are not explicitly mentioned in this manual.

8. Use only original GLP spare parts. Any structural modification of the

system will terminate all warranty claims.

9. Please keep this instruction manual for future reference.

10. Should you have any questions about the operation of your fixture then

please contact your local GLP office, or their authorized distributor, a list of

which can be found at www.glp.de.

GLP German Light Products GmbH

impression X1 manual (v1.0) from software version: 1.0 7

3 Mounting

The

is fully operational whether it hangs or is mounted to the

wall. It can also be operated while standing on the floor. Keep a safety distance

of min. 0.5 m towards any easily inflammable materials (decoration etc.).

Pay attention to the regulations of: BGV C1 (former VBG 70),

DIN VDE 0711-217 and BGI 810-3.

The installation shall be done by qualified staff only.

For the various mounting positions of the

(standing on the

floor, sideways or hanging) different connectors are available. Through this a

safe and firm installation is assured. You'll find dedicated M10 threads on the

bottom side of the fixture which should be used. In addition the top of the base

is marked with a FRONT arrow allowing consistent orientation during

installation.

GLP German Light Products GmbH

impression X1 manual (v1.0) from software version: 1.0 8

3.1.1 Operating on the Floor (Upright)

The

is fitted with 4x solid

rubber feet which allows a stable standing

of the fixture. An additional securing is

usually not required. Please pay attention

to an even and gripping surface.

3.1.2 Mounting in hanging position

To operate the

in a hanging position please use a half-

coupler (clamp). This can be mounted directly to the bottom side of the

fixture. It should be attached centrically with a M10 mm thread bolt (max.

length 11mm).

Attention: Never use a longer bolt as this may damage the interior

of the fixture.

GLP German Light Products GmbH

impression X1 manual (v1.0) from software version: 1.0 9

3.1.3 Mounting in sideways Position

To operate the

in a sideways position please use two

half-couplers (clamps) attached to the bottom side of the base. They

should be attached with M10 mm thread bolts (max. length 11mm).

This technique is necessary to cope with the torque which accrues in this

mounting position. Never use the "Mounting in hanging position" technique

described above to fasten the fixture in the sideways position. A safe and

sound installation cannot be assured in this way. In addition this can

damage the fixture base.

Attention: Always use two (2) half-couplers for sideway mounting.

GLP German Light Products GmbH

impression X1 manual (v1.0) from software version: 1.0 10

3.2 Securing the Fixture

Regardless of the mounting method of the

you'll have to use

a stipulated safety wire. Attach the safety wire through one of the two holes

provided on the base of the fixture and connect it to the primary support

structure. Pay attention to a safe and proper fastening. The safety cable must

comply with BGI 810-3 (EN 60598-2-17 Section 17.6.6) and be capable of

bearing a static suspended load that is ten times the weight of the fixture and all

installed accessories.

3.3 Connections

3.3.1 Power Supply

~100-240 Volt AC, 50-60 Hz, powerCON AC connector

Connected load 85 VA (W)  T2A (micro-fuse 5x20mm)

Please also see the printing on the case!

Disconnect from the mains supply for changing the fuse and use only

the above described micro-fuse type.

3.3.2 NEUTRIK



powerCON

The IMPRESSION X1 is fitted with NEUTRIKpowerCON locking 3

conductor AC connectors.

The grey connector must be used to draw AC mains power from the fixtures`

throughput sockets and the blue connectors must be used to supply power at

the fixtures` power input socket.

The total number of fixtures in one interconnected chain depends on your local

AC mains voltage but you must never connect more than a total load of 20A to

stay within the limits of the connector. The total load includes all connected

fixtures including the first one in the chain.

Note: The maximum allowed total -

load is 20A including the first fixture

in one interconnected daisy chain.

Inhaltsverzeichnis

Andere GLP Scheinwerfer Handbücher

GLP

GLP X4 Atom Bedienungsanleitung

GLP

GLP Impression X4 XL Bedienungsanleitung

GLP

GLP Fusion MBL40 Bedienungsanleitung

GLP

GLP Impression 120RZ RGB Bedienungsanleitung

GLP

GLP Impression X4 XL Bedienungsanleitung

GLP

GLP YpocBasic 250 Bedienungsanleitung

GLP

GLP Impression 300 XL RZ RGB Bedienungsanleitung

GLP

GLP Fusion MBL20 Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

VIZULO

VIZULO Micro Martin Benutzerhandbuch

EuroLite

EuroLite LED IP FL-100 SMD Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock XB12 Bedienungsanleitung

Allen + Roth

Allen + Roth 17624-000 Bedienungsanleitung

ADJ

ADJ 4 STAGE PAK Bedienungsanleitung

Cooper Lighting

Cooper Lighting EGL91SW233 Bedienungsanleitung

Max

Max 37496 Bedienungsanleitung

BEGA

BEGA 85 143 Bedienungsanleitung

Beamz

Beamz 151.226 Bedienungsanleitung

EuroLite

EuroLite LED IP FL-8 Bedienungsanleitung

Ledj

Ledj PERFORMER 36 RGB Bedienungsanleitung

Perel

Perel ELS3 Bedienungsanleitung

Perel

Perel ELS3WD Bedienungsanleitung

LumX

LumX LM 36130 Bedienungsanleitung

Xtricity

Xtricity 4-80053 Bedienungsanleitung

Stahl

Stahl 6521/4 Series Bedienungsanleitung

Ecosense

Ecosense EcoSpec Bedienungsanleitung

Ayrton

Ayrton minipanel FX Bedienungsanleitung

GLP impression X1 Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken