GMP RTR-380COMBI Bedienungsanleitung
2015. 08
RTR-380COMBI User Manual
Before operating the unit, please read this manual thoroughly and retain it for future reference.
※ The design / specification of the machine could be changed for improvement without any prior notice.
CONTENTS
Important Safety Instruction 3page Product Maintenance 21 page
Safety Device
6page Malfunction & Measures 22 page
Contents 7page Product Specification 24 page
Each Part Name
8page Subsidiaries 25 page
Transportation & Installation 9page
How to use the control panel 10 page
How to use Main Device 13 page
How to laminate 15 page
Pre-information
How to install
Maintenance & Service
IMPORTANT SAFETY INSTRUCTION
"Important Safety Instruction " is for the purpose of user's safety
Read thoroughly and use rightly according to the manual
Important safety Instruction is classfied as "Warning" and "Caution", the meaning is as follws;
Warning: If you ignore this symbol, you could suffer serious injury or death.
Caution: If you ignore this symbol, you could receive a serious injuty or loss property.
This symbol means a prohibited action. If you ignore a prohibited action, you could suffer a personal
injury and damage the machine.
This symbol means a required action.If you donot follow this action, your safety is not guaranteed.
Requried action will be included in this symbol.
Reference : The sign above refers the contents for user's safety and prevention of property loss.
3/25
IMPORTANT SAFETY INSTRUCTION
Do not connect of disconnect with wet hands, as this will cause an electric shock
Do not overload a power supply, as this will cause a fire and an electric fire and an electric shock
Do not use a damaged plug or lead, as this could cause a fire or an electric shock
Make sure plug is in the socket, as it could cause fire or an electirc shock
Danger, Malfunction, loss of electricity could cause an electric shock
Do not pull the plug or bend improperly
Do not use materials near a naked flame
Do not dissemble, make repairs or convert the machine. Contact your dealer for repairs
Contact with the purchase place about the checks inside the laminator or making repairs.
Do not spill any liquids on the laminator as this will cause damage and a possible electric shock
Do not use the flammable spary or flammable materials inside or outside the machine. As this could cause a fire.
Do not allow children use of this equiment
Warning
P
o
w
e
r
I
n
s
t
a
l
l
a
t
i
o
n
4/25
IMPORTANT SAFETY INSTRUCTION
When moving the product, turn off the power switch, disconnect the power plug from the socket
When the laminator is not in use, you must turn off the power switch, disconnect the power plug from the socket
This product is rellay heavy. Please carry this with 2 to 3 people together.
Please avoid installing near the following place;
Gas stove, Ventilator or Air conditioner due the higher temperature or higher humidity
Do not place any materials on the laminator as they could catch a fire
Avoid the direct sunlight for the installing the machine
Make sure no vibration and dusts are found in the place during the installation
Avoid the dark and slope place for installation
Do not place any materials on the laminator as they could catch a fire
Do not touch the film and laminating machine just after lamination finishes as you could be burnt
Long hair, neckles, necktie will cause injury to the machine
Use the machine with laminating purpose only
Tidy up the place near the laminating machine
P
o
w
e
r
I
n
s
t
a
l
l
a
t
i
o
n
Caution
5/25
SAFETY DEVICE
Push the below red botton, and emergency switch will works
☞ Safety Device stop all system.
Emergency Switch fucntion is stopping drive motor. Turn red botton as below and it will return to normal.
This is only for the emergency.
※ Emergency Stop & Emergency Cancellation
Push the below red botton, and emergency switch will work
All stystems stop, if turning it clockwise as below, it reutnr to normal.
☞ Safety Cover
It is to prevent the injury like the burning in the high temperature roller
, getting stucked to the motor drives.
The safety covers switch installed in left/right sides stop the system
when the cover is open.
Meke sure that the safety cover is always closed except the film loading
Safety Device
Emergency Switch
Emergency Stop
Emergency Cancellation
Safety Cover Switch
6/25
PACKING CONTENTS
Item Q'ty(EA)
LAMINATOR 1
User Manual
1
4mm T Wrench 1
3mm L Wrench 1
3.15A FUSE
2
6.3A FUSE 2
LAMINATOR
User Manual
Packing Contents
7/25
EACH PART NAME
1. Rewinder Tension Handle
2. Emergency Switch
3. Upper Film Tension Handle
4. Lower Film Tension Handle
5. Decurling Adjusment Handle
6. Upper Rewinder Tension Handle
7. Seperator
8. Power
9. Lower Rewinder Tension Handle
10. Control Panel
11.Lower Film Shaft
12. Buffer Idle Shaft
13. Safety Cover
14. .Upper Film Shaft
Each Part Name
8
10
13
6
11
9
12
14
1
7
4
5
3
2
Please refer to main devices
8/25
MOVEMENT & INSTALLATION
Warning : Product is so heavy, necessarily 2 people are needed. It is a main reason of breakage and personal injury
Warning : Please sepregate plug from an outlet. If you don't, it a reason of electricity shock
Warning : For safety, grounding is necessarily needed
Mechanical disorder and electricity breakage can be a reason of electricity shock
Warning : Do not use many product simultaneously with one outlet. Outlet overheating can be a reason of fireflame
Warning : Only use the specified power and voltage. It can be a reason of fireflame or an electricity fireflame.
Warning : Insert inside the outlet certainly. Outlet overheating a reason of a fireflame
Warning : The socket-outlet shall be installed near the equipement and shall be easily accessible
Connecting Power:
Power supply used with AC 220~240V/15A.
For safety, grounding is needed.
GROUND
Carriage & Installation:
If you carry this product. 2 people is needed with extra
caution
9/25
HOW TO USE CONTROL PANEL
☞ What's on the control panel
Control panel consists of display window(A) & master dial(B) & function button(C~L) A. Display
B. MASTER DIAL
C. Button for upper roller temperature setting
D. Button for upper roller temperature setting
E. Button for roller run/stop
F. Button for roller reverse running
G. Button for roller pressurization/release
H. Button for selecting printer IN LINE/OFF LINE
I. Button for setting speed
J. Button for selecting job mode
K. Button for selecting fan ON/OFF
☞ Details of control panel
A. Display
① To show laminating roller temperature & state
② To show roller speed
③ To show job mode
④ To show message
① T show laminating roller temperature & state
It shows temperature set of up/low hot roller & present temperature. Regarding how to set temperature, refer to function of "TEMP" button.
It usually shows temperature set. When pressing MASTER DIAL, present temperature comes up.
- "W"(WAIT) : This means that laminating job is not proper (that is, temperature is high or low).
- "R"(READY) : This means that laminating job is proper. Start laminating job.
TOP:100℃R SPD:1
BOT:100℃W JOP:P
①②
③
④
A
C
B
D
E
F
G
H
I
J
K
10/25
Inhaltsverzeichnis
Andere GMP Laminiergerät Handbücher
GMP
GMP PROTOPIC III-540 Bedienungsanleitung
GMP
GMP GraphicMaster 1600HR Bedienungsanleitung
GMP
GMP SURELAM-PRO540HR Bedienungsanleitung
GMP
GMP SURELAM-PRO540HR Bedienungsanleitung
GMP
GMP EXCELMASTER-1600 Bedienungsanleitung
GMP
GMP ELECTRO ULTRA LAMITRIM-1800 Bedienungsanleitung
GMP
GMP PROTOPIC AUTO-540 HS Bedienungsanleitung
GMP
GMP PROTOPIC AUTO-540 HS Bedienungsanleitung
GMP
GMP SURELAM-PRO540HR Bedienungsanleitung
GMP
GMP EXCELAM-1100SWING Bedienungsanleitung
