Gnet IP104 Bedienungsanleitung
User’s Manual
Broadband Routers
IP104 / IP104P
Copyright
The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in
an information retrieval system, translated into any language, or transmitted in any form or by any
means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the
prior written permission.
Trademarks
All product, company, brand names are trademarks or registered trademarks of their respective
companies. They are used for identification purpose only. Specifications are subject to be changed
without prior notice.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against radio interference in a commercial environment. This equipment can generate, use and radiate
radio frequency energy and, if not installed and used in accordance with the instructions in this manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause interference, in which case the user, at his own expense, will be required to take
whatever measures are necessary to correct the interference.
CE Declaration of Conformity
This equipment complies with the requirements relating to electromagnetic compatibility, EN
55022/A1 Class B, and EN 50082-1. This meets the essential protection requirements of the European
Council Directive 89/336/EEC on the approximation of the laws of the member states relation to
electromagnetic compatibility.
Table of Contents
Chapter 1 Introduction .............................................................................. 6
Functions and Features ........................................................................ 6
Packing List ......................................................................................... 7
Chapter 2 Hardware Installation ............................................................... 8
2.1 Panel Layout .................................................................................. 8
2.2 Installation Requirements .............................................................. 9
2.3 Procedure for Hardware Installation............................................ 10
Chapter 3 Network Settings and Software Installation........................... 11
3.1 Make Correct Network Settings of Your Computer .................... 11
3.2 Install the Software into Your Computers (Optional) .................. 12
Chapter 4 Configuring NAT Router........................................................ 15
4.1 Start-up and Log in ...................................................................... 15
4.2 Status............................................................................................ 16
4.3 Wizard.......................................................................................... 17
4.4 Basic Setting ................................................................................ 19
4.4.1 Primary Setup............................................................................ 20
4.4.2 DHCP Server ............................................................................ 24
4.4.3 Change Password...................................................................... 26
4.5 Forwarding Rules......................................................................... 27
4.5.1 Virtual Server ............................................................................ 28
4.5.2 Special AP................................................................................. 29
4.5.3 Miscellaneous Items.................................................................. 30
4.6 Security Settings .......................................................................... 31
4.6.1 Packet Filter .............................................................................. 32
4.6.2 Domain Filter............................................................................ 37
4.6.3 MAC Address Control .............................................................. 38
4.6.4 Miscellaneous Items.................................................................. 41
4.7 Advanced Setting......................................................................... 42
4.7.1 System Log ............................................................................... 43
4.7.2 Dynamic DNS........................................................................... 44
4.7.3 SNMP Setting ........................................................................... 46
4.7.4 Routing Table............................................................................ 48
4.8 Toolbox ........................................................................................ 50
4.8.1 System Log ............................................................................... 51
4.8.2 Firmware Upgrade .................................................................... 52
4.8.3 Backup Setting.......................................................................... 53
4.8.4 Reset to default ......................................................................... 53
4.8.5 Reboot....................................................................................... 53
4.8.6 Miscellaneous Items.................................................................. 54
Chapter 5 Print Server (optional)............................................................ 55
5.1 Configuring on Windows 95/98 Platforms .................................. 55
5.2 Configuring on Windows NT Platforms...................................... 57
5.3 Configuring on Windows 2000 and XP Platforms ...................... 58
5.4 Configuring on Unix based Platforms ......................................... 62
Appendix A TCP/IP Configuration for Windows 95/98 ........................ 63
A.1 Install TCP/IP Protocol into Your PC ......................................... 63
A.2 Set TCP/IP Protocol for Working with NAT Router................... 64
Appendix B Console Mode (optional).................................................... 68
Chapter 1 Introduction
Congratulations on your purchase of this outstanding Broadband Router. This product is specifically
designed for Small Office and Home Office needs. It provides a complete SOHO solution for Internet
surfing and office resources sharing, and it is easy to configure and operate for even non-technical
users. Instructions for installing and configuring this product can be found in this manual. Before you
install and use this product, please read this manual carefully for fully exploiting the functions of this
product.
Functions and Features
Broadband modem and NAT Router
Connects multiple computers to a broadband (cable or DSL) modem or an Ethernet router to
surf the Internet.
Auto-sensing Ethernet Switch
Equipped with a 4-port auto-sensing Ethernet switch.
VPN supported
Supports multiple PPTP sessions and allows you to setup VPN server and VPN clients.
Printer sharing (Optional)
Embeds a print server to allow all of the networked computers to share one printer.
Firewall
All unwanted packets from outside intruders are blocked to protect your Intranet.
DHCP server supported
All of the networked computers can retrieve TCP/IP settings automatically from this product.
Web-based configuring
Configurable through any networked computer’s web browser using Netscape or Internet
Explorer.
Packet filter supported
Packet Filter allows you to control access to a network by analyzing the incoming and
outgoing packets and letting them pass or halting them based on the IP address of the source
and destination.
Universal Plug and Play (UPnP) supported
Universal Plug and Play (UPnP) enable devices such as PCs, routers or other devices to be
plugged into a network and automatically know about each other.
Virtual Server supported
Enables you to expose WWW, FTP and other services on your LAN to be accessible to
Internet users.
User-Definable Application Sensing Tunnel
User can define the attributes to support the special applications requiring multiple
connections, like Internet gaming, video conferencing, Internet telephony and so on, then this
product can sense the application type and open multi-port tunnel for it.
DMZ Host supported
Lets a networked computer be fully exposed to the Internet; this function is used when
special application sensing tunnel feature is insufficient to allow an application to function
correctly.
Domain Filter Supported
let you prevent users under this device from accessing specific URLs.
SNMP Supported
In brief, SNMP, the Simple Network Management Protocol, is a protocol designed to give a
user the capability to remotely manage a computer network by polling and setting terminal
values and monitoring network events.
Routing Table Supported
Routing Tables allow you to determine which physical interface address to use for outgoing
IP data grams. If you have more than one routers and subnets, you will need to enable routing
table to allow packets to find proper routing path and allow different subnets to communicate
with each other.
Network time Supported
Allow you to synchronize system time with network time server.
Statistics of WAN Supported
Enables you to monitor inbound and outbound packets
Packing List
Broadband router unit
Installation CD-ROM
Power adapter
Chapter 2 Hardware Installation
2.1 Panel Layout (your product may need to be modified)
2.1.1. Front Panel
Figure 2-1 Front Panel
LED:
LED Function Color Status Description
M1&M2 System status
indicators Orange Blinking
M1 is flashed once per second to
indicate system is alive. When
system is busy, M2 is lighted.
On The WAN port is linked.
WAN WAN port
activity Green
Blinking The WAN port is sending or
receiving data.
On An active station is connected to
the corresponding LAN port.
Link/Act.
1~4 Link status Green
Blinking The corresponding LAN port is
sending or receiving data.
Speed
10/100 Data Rate Green On Data is transmitting in 100Mbps
on the corresponding LAN port.
Port:
RESET To reset system settings to factory defaults, please follow the steps:
1. Power off the device,
2. Press the reset button and hold,
3. Power on the device,
4. Keep the button pressed about 5 seconds,
5. Release the button,
6. Watch the M1 LED and M2 LEDs, they will flash 8 times and then
M1 flash once per second.
2.1.2. Rear Panel
Figure 2-2 Rear Panel
Ports:
Port Description
5VDC Power inlet: DC 5V, 1.5A (minimum)
WAN the port where you will connect your cable (or DSL) modem or
Ethernet router.
Port 1-4 the ports where you will connect networked computers and other
devices.
PRINTER Printer Port (Optional)
COM Serial port (connect analog modem or console cable)(optional)
2.2 Installation Requirements
This product can be positioned at any convenient place in your office or house. No special wiring or
cooling requirements is needed. However, you should comply with the following guidelines to install:
Place this product on a flat horizontal plane.
Keep this product away from any heating devices.
Do not place this product in dusty or wet environment.
The recommended operational specifications of this product are:
Temperature 0
oC ~ 55
oC
Humidity 5 % ~ 90 %
In addition, remember to turn off the power, remove the power cord from the outlet, and keep your
hands dry when you try to install the hardware of this product.
2.3 Procedure for Hardware Installation
1. Setup LAN connection: connect an Ethernet cable from your computer’s Ethernet
port to one of the LAN ports of this product.
2. Setup WAN connection: prepare an Ethernet cable for connecting this product to
your cable/xDSL modem or Ethernet backbone.
3. Power on:
Connecting the power cord to power inlet and turning the power switch on, this
product will automatically enter the self-test phase. When it is in the self-test phase,
the indicators M1 and M2 will be lighted ON for about 5 seconds, and then M1 and
M2 will be flashed 3 times to indicate that the self-test operation has finished. Finally,
the M1 will be continuously flashed once per second to indicate that this product is in
normal operation.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise