Godex EZ-4TKP Bedienungsanleitung

P/N. 920-010612-02

Edition 2

November 00

EZ-4TTP/4TKP Programming Manual

EZ-4TTP/4TKP PROGRAMMING MANUAL...................0

1. COMMANDS......................................................................................2

1-1. EZPL........................................................................................................2

1-2. Language Description.............................................................................4

1-3. Barcode .................................................................................................13

2. EXAMPLES.....................................................................................14

APPENDIX..........................................................................................21

A. Barcode Details........................................................................................21

B. The New Commands...............................................................................22

1. Commands

1-1. EZPL

The EZPL (EZ Programming Language) is a high-level label definition and printer control language.

The features are:

1. The data fields are stored and processed until the printing instruction is received.

2. All the data can be rotated.

3. Imagescan be downloaded and stored.

There are three basic types of commands:

?Setup

?Control

?Label format

Setupcommands

Contain the printer control instructions, configuration instructions and image downloading instructions.

Description Command Page

Stop position setting ^Ex 4

Setting Print darkness ^Hx 4

Number of pages printed ^Px 4

Label length ^Qx,y(,z?)4

Speed setting ^Sx 5

Numberofcopies per label ^Cx 5

Row column adjustment ^Rx 5

Label format begin sign ^L 5

Strippersensor ^Ox 5

10.Download label format ^Fname 5

11.Recall label format ^Kname 5

12.Label width setting ^Wxx 6

13.Numberoflabelsper cut ^Dx 6

14.Serial Port translation setting ^Yp1.p2,p3,p4 6

15.Set the forward length ^Mx 6

16.Set the backward length ^Bx 6

Control commands

Cause the printer to take action immediately, such as cleaning memory, feeding label.

Description Command Page

Graphicdownloadmemory ~Ea,name,length 7

Bit-Mapped font download ~Jn 7

Graphicmode ~G 7

Print last label ~Px 7

Print version message ~V 7

Date/Time setting ~Dm,d,y,h,I,s 7

Reset printer ~Z 7

Printer head testing ~T 7

Clear all ~MDEL 7

10.Clear memory ~MDELx,name 7

11.Rotate printing ~Rx 8

12.Print the available space and data name in the memory ~Xn 8

13.Acknowledge fromRS-232 ~Kn8

14.Row Offset Adjustment ~Q±n 8

Label formatting commands

Define field data, such as Line, Rectangle, Barcode, Text and image.

Description Command Page

Define date layout Daa|bb|cc 9

Serial number setting Cx,ys,?value,prompt 9

Terminate label formatting mode and print

label E9

Graphiccommand Gwxxx 9

Line command La,x, y, x1, y1 9

Rectangle Rx, y, x1,y1, lrw, ubw 10

Table Hx,y,row_count,col_count,row_width,col_width,line_width 10

Define time layout formatting Th|m|s 10

Graphics Yx, y, name 10

10.Text At, x, y, x_mul, y_mul, gap, rotation, data 10

11.Barcode Bt,x,y,narrow,wide,height,rotation,readable,data 11

12.PDF 417 Px,y,w,h,r,c,ec,len 11

13.Maxicode Mx, y, sno, nos, mode, ccode, zip, class, rotation,

message 11

14.Define variable field Vxx, length, prompt 12

15.Pattern command Qx,y,width,height 12

16.Downloading character sets to memory Vt,x,y,x_mul,y_mul,gap,rotation,data 12

1-2. Language Description

Rules and syntax

EZPL commands have parameter strings associated with them;

?? The commands begin with a letter as ID for each function.

?? The comma (,) is the delimiter to separate each parameter.

?? The CR [Carriage Return: decimal (13), hex (oD) signifies the end of every command.

?? Control and Setup commands use the tilde (~) and caret (^) prefix.

?? Label Formatting commands have no prefix.

Example: “~Ea,name,length “. ”I” is an image download command, and (a,name,length) are three parameters.

Setupcommands

1. Stoppositionsetting

Syntax :

^Ex

Parameter :

X= 0~40 (unit : mm)

Description :

Feed paper to desired stopposition.

The suggested value of x is 14 for label gap paper, 12 for stripper operation, 28 for cutter fonction.

2. Setting Print darkness

Syntax :

^Hx

Parameter :

X = 00 ~ 19

Description :

Set printing darkness.

3. Number of pages printed

Syntax :

^Px

Parameter :

x = 1 ~ 32767

Description :

Set how many labels to print; and it will initiate the program.(refer page 17)

4. Label length

Syntax :

^Qx,y(,z?)

Die cut label:(See fig. 1)

x = Label length (unit : mm)

y = Gap length (mm)

Parameter :

EX.

^Q25,3

(x=25,y=3)mm

paper feed

direction

Plainpaper:

x = Label length (unit : mm)

y = 0 (constant)

z = Feed paper length (unit : mm)

Black marklabel:

x= Label length (unit : mm)

y = Black mark width(mm)

z= Black line to top of form position.

z+ : When thepositionisoutside the blackmark.

z-:When the position iswithin the black mark.

EX.

^Q25,4,3+

(x=25, y=4, z=3+) mm

^Q25,4,3-

(x=25, y=4, z=3-)mm

paper feed

direction

^Qx,y,z+

^Q,x,y,0+

^Q,x,y,z-

Description :

Set label size (length, gap length, [plain paper feed length])

5. Speed setting

Syntax :

^Sx

Parameter :

x=1 to 4 (inch/sec)

Description :

Set printing speed

6. Number of copies per label

Syntax :

^Cx

Parameter :

X = 0 ~ 32767

Description :

Number of copies of the same label (refer page 17)

7. Row column adjustment

Syntax :

^Rx

Parameter :

x = 0 ~ 399dots

Response :

None

Description :

Set left margin

8. Label format beginsign

Syntax :

Parameter :

None

Descripton :

Set label begin sign

9. Stripper sensor

Syntax :

^Ox

Parameter :

x = 0 , stripper disable.

x = 1 , stripperenable

Description :

Enable or disable the stripper sensor. When you use this command, it should be matched with^Ex.

(refer page 16)

10. Download label format

Syntax :

^Fname

data

Parameter :

Name = name of label format (up to 20 characters)

Data = the data containing the label formatting command for this stored format

Description :

Download label format intomemory. After the download is finished, the printer will beep once (refer

page19).

^Fname

Control/Setup command

Label format command

data

Same name inspection : If you use the same file name, the printer will print ”REPEAT FILE

NAME”, and the download will be not be accepted.

11. Recall label format

Syntax :

^Kname

Parameter :

Name = name of recall label format (up tp 20 characters)

Description :

Recall label format from external format (refer page19)

^Kname

~Px

data

Control/Setup command [option]

12. Label width setting

Syntax :

^Wxx

Parameter :

x=label width (mm)

Description :

Label width setting

13. Number of labelsper cut

Syntax :

^Dx

Parameter :

X = 0 , disable cutting.

X = 1 ~ 32767 , number of label per cut.

Description :

Number of labelsper cut (refer page 17)

14. Serial Port translation setting

Syntax :

^Yp1.p2,p3,p4

Parameter :

p1 : Baud Rate (48 or 96 or 19 or 38) ; 48=4800bps; 96=9600bps; 19=19200bps; 38=38400bps

p2 : Parity (N, O, E) ; N=none parity; O=odd parity; E=even parity

p3 : Number of data bits (7 or 8)

p4 : Number of stop bits (1 or 2)

Description :

Serial Port translation setting

15. Set the forward length

Syntax :

^Mx

Parameter :

x = forward length (mm)

Description :

Set the forward length of the paper

16. Set the backward length

Syntax :

^Bx

Parameter :

x = backward length (mm)

Description :

Set the backward length of the paper

CONTROL COMMAND

1. Graphic download memory

Syntax:

~Ea, name, length

Parameters :

a = P or p : PCX file

a = B orb :BMPfile

name : Name of image (up to20 character)

length : Length of image (bytes), maximum 512K byte.

Description :

Download monochrome image onto memory. Printer will beep 1 time after completely downloaded.

If you use the same file name, the printer will show ”REPEAT FILE NAME”, and the download will

be not be accepted (refer page 19).

2. Bit-Mapped fontdownload

Syntax :

~Jn

Parameters :

n = character; From a ~ z or A ~ Z; at least up to 26 characters.

Description :

The command used for font loading is usually generated by Qlabel-III label creation software. The

printer will beep once after downloaded. If you use the same file name, the printer will

show ”REPEAT FILE NAME”, and the download will be not being accepted. The downloaded font

are compatible with the HP Laser Jet II Plus (PCL-4).

Download the “HVR0OE1A.SFP” text file to external memory card. Use “A” to do the character

code name.

Example :

~JA ; Define A as HVR0OE1A.SFP

COPY HVR0OE1A.SFP PRN/B ; Send the order with the DOSmode

3. Graphic mode

Syntax :

Parameter :

None

Decription :

Printer is in the image-receiving mode. Image data is directly sent from host to the printing buffer

(refer page 18)

4. Print last label

Syntax :

~Px

Parameter :

x = 1 ~ 32767

Description :

This command will repeatedly print the indicated copies of the last label format.

5. Print version message

Syntax :

Parameter :

None

Description :

Print firmware version (refer page20)

6. Date/Timesetting

Syntax :

~Dm,d,y,h,I,s

Parameter :

m = Month (01 to 12)

d = Date (01 to 31)

y = Year (last two digits of year)

h = Hour (00 to 23)

i = Minutes (00 to 59)

s =Seconds (00 to 59)

Description :

Set real time clock (refer page 15)

7. Reset printer

Syntax :

Parameter :

None

Description :

Reset the printer, the LED will flash once.

8. Printer head testing

Syntax :~T

Parameter :None

Description :Print a pattern for the user to determine if the print head is damaged (refer page20)

9. Clear all

Syntax :~MDEL

Parameter :none

Description :Clear all in the memory (not include Asia font)

10. Clear memory

Syntax :~MDELx,name

Parameter :x = type

G, graphic

F, label form

E, Bit-Mapped font (not included Asia font)

name: The name of the graphic, form and Bit-Mapped font

Description :Able to delete individual files or erase entire flash memory.

Example :~MDELG,Bus ; the graphic “Bus” will be deleted

11. Rotate printing

Syntax :~Rx

Parameter :x = label width; from 1 to 104 (mm)

Description :Rotate the label format 180-degrees when printing (refer page 18). To return to the original print

direction, set the x value greater than 104 (ie. ~R105).

12. Print the available space and data name in the memory

Syntax :~Xn

Parameter :n = 1, print label format names and available space in memory.

n = 2, print graphic namesand available space in memory.

n = 3, print Bit-Mapped font names and available space in memory.

n = 4, print the name of the label formats, graphics, fonts, and available space in memory.

n = 5, print Asia font names and available space in memory

n = 6, feed backthe total printed length through the printer’s serial port

Description :Print the available space in the memory card (unit: bytes)

13. Acknowledge from RS-232

Syntax :~Kn

Pararmeter :n= 0, disable.

n = 1, enable.

Return value :Y?

Description :Acknowledge a “Y(0D0A)” from RS-232 back to host each printing label.

14. Row Offset Adjustment

Syntax :~Q±n

Pararmeter :n=-36 ~ +36

Return value :none

Description :If the printing doed not appear in the same place on every label, this command instructs the printer

to print label formats +n increments above the position the format specifies, and–n decrements

below the position the format specifies.

Label formatting commands

1. Define date layout

Syntax :Daa|bb|cc

Parameter :aa = Year

y2 : Year with twodigits (such as 97)

y4 : Year with four digits ( such as 1997)

bb = Month

me : Month in letters (JAN, FEB, .... )

mn : Month in numeric (01, 02, .... )

cc = 2 digits day

| = Separator, can be any ASCII character between decimal 32 to 63.

Description :Define the date layout for print out (refer page15)

2. Serial number setting

Syntax :Cx,ys,?value,prompt

Parameter :x: 0 to 9(up to10group),maximum combination up to3groups.

y: select the decimal

y=none,Decimal(0~9)

y = A, Hexadecimal (0~9,A~F)

y = C, 0~9, A~Z

s: start value of serial variable (up to 13-digit)

?value: inc. / dec. value of serial variable (up to 12-digit)

prompt: prompt of serial variable (up to 20 characters)

Description :Set the serial number (refer page17)

Example :^Q50,0,0

^W100

^S3

^H10

^E12

^P5

C0,000,+1,AA

C1,AEE,+1,BB

C2,CZYY,+1,CC

AC,5,5,1,1,1,0,^C0^C1^C2

Printing result:

000EEZYY

001EFZYZ

002F0ZZ0

003F1ZZ1

004F2ZZ2

3. Terminatelabel formatting mode and print label

Syntax :E

Parameter :None

Description :End of formatting command; printer will print label after receiving this command.

4. Graphic command

Syntax :Gwxxx

Parameter :wxxx...

w : byte number of image data (xxx...)

Description :This command is a sub-commandof ~G It is sent by binary data. W is the digits number byte of image

data (refer page18). For example, if the image file is 50 bytes, the command is G2xxx . (2: ASCII is 50

decimal)

5. Line command

Syntax :La,x, y, x1, y1

Parameter :a = o, overwrite line

a = e, exclusive or line

x : left-up; per horizontal(Hori.) pos. (dot; 1mm= 8dots)

y : left-upper vertical (Vert.) pos. (dots)

x1: right-bottom Hori. Pos. (dots)

y1: right-bottom Vert. Pos. (dots)

Description :Define a line to render in the label (refer page15)

** The diagonal line draw is not available **

Andere Handbücher für EZ-4TKP

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Godex Drucker Handbücher

Godex

Godex CI-4040 Bedienungsanleitung

Godex

Godex BP2250i Bedienungsanleitung

Godex

Godex MX20 Bedienungsanleitung

Godex

Godex EZ-2000 PLUS Bedienungs- und Wartungshandbuch

Godex

Godex EZ-1000 Plus Bedienungs- und Wartungshandbuch

Godex

Godex EZ-2000 PLUS Bedienungsanleitung

Godex

Godex EZ-2200 Bedienungs- und Wartungshandbuch

Godex

Godex HD830i Bedienungsanleitung

Godex

Godex EZ-1200 Bedienungs- und Wartungshandbuch

Godex

Godex RT200i Bedienungsanleitung

Godex

Godex GE300 Bedienungsanleitung

Godex

Godex EZ-2200 Bedienungsanleitung

Godex

Godex EZ-2P Bedienungsanleitung

Godex

Godex EZ-1105P series Bedienungsanleitung

Godex

Godex EZ-4TKP Bedienungsanleitung

Godex

Godex AG2000 Bedienungsanleitung

Godex

Godex RT200 Bedienungsanleitung

Godex

Godex EZ-1000 Plus Bedienungsanleitung

Godex

Godex RT700i Bedienungsanleitung

Godex

Godex MX20 Bedienungsanleitung

Godex

Godex EZ-DT-2 Bedienungsanleitung

Godex

Godex EZ-2P Bedienungsanleitung

Godex

Godex C-650Plus II Bedienungsanleitung

Godex

Godex EZ-2 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung