Godox TT600 Bedienungsanleitung
迅丽机顶闪光灯
Thinklite Camera Flash
INSTRUCTION MANUAL
说 明 手 册
中英文双语 / Chinese English Bilingual
在使用本产品之前：
请先仔细阅读本手册，以确保您能安全使用。请保存好本手册以备将来
查询参考。
Before using this product:
Please read this user manual carefully in order to ensure your safety
and the proper operation of this product. Keep for future reference.
- 19 -
Foreword
Thank you for purchasing a GODOX product.
TT600 camera ash adopts Godox wireless X system and 2.4G ratio
transmission, which is compatible with AD360II-C、AD360II-N、
TT685C、TT685N、X1T-C、X1T-N, etc. Fit all DSLR camera
brands e.g. Canon, Nikon, Sony, etc.
This TT600 camera ash features:
• GN60 (m ISO 100, @200mm). Adjust from 1/1 to 1/128 in
1/3rd stops
• Built-in 2.4G wireless transmission to support transmitting and
receiving
• High speed sync, wireless remote control, multi flash and
manual focus assist
• Stable consistency and color temperature with good even
lighting
• User-friendly LCD display & control panel
- 20 -
For Your Safety
• Always keep this product dry. Do not use in rain or in damp
conditions.
• This product contains high-voltage electronic parts. Touching
the high-voltage circuit inside it may result in electric shock. Do
not disassemble. Should repairs become necessary, this
product must be sent to an authorized maintenance center.
• Stop using this product if it breaks open due to extrusion,
falling or strong hit. Otherwise, electric shock may occur if you
touch the electronic parts inside it.
• Do not re the ash directly into the eyes (especially those of
babies) within short distances. Otherwise visual impairment
may occur. When taking pictures for babies, keep the ash unit
at least 1 meter (3.3 feet) away from them. Using bounce ash
to reduce light intensity is also recommended.
• Do not use the ash unit in the presence of ammable gases,
chemicals and other similar materials. In certain circumstances,
these materials may be sensitive to the strong light emitting
from this ash unit and re or electromagnetic interference may
result.
• Do not leave or store the ash unit in places where the ambient
temperature reads over 50°C (e.g. in automobile). Otherwise
the electronic parts may be damaged.
- 21 -
Thinklite Camera Flash
Conventions used in this Manual
● This manual is based on the assumption that both the camera and
camera ash’s power switches are powered on.
● Reference page numbers are indicated by “p.**”.
● The following alert symbols are used in this manual:
The Caution symbol gives supplemental information.
The Note symbol indicates a warning to prevent shooting problem.
Electronic Camera Flash
- 22 -
Foreword
For Your Safety
Name of Parts
Body
Control Panel
LCD Panel
What’s in the Box of TT600?
Separately Sold Accessories
Attaching to a Camera
Using the Flash
Power Management
Flash Output
ZOOM: Setting the Flash Coverage
M Mode
Multi Mode: Stroboscopic Flash
S1 Mode
S2 Mode
Hi-Speed Sync Triggering
Custom Function----Focus Assist Beam
Buzz Function
Wireless Flash Shooting: Ratio (2.4G)
Transmission
Wireless Control Function
Sync Triggering
Custom Function----Sleep Function
C.Fn Setting Custom Functions
Protection Function
Advanced Application
Technical Data
Maintenance
19
20
23
26
26
34
35
37
37
Contents
- 23 -
Name of Parts
● Body
01. Catchlight Panel
02. Built-In Wide Panel
(Retracted)
03. Flash Head
04. Optic Control Sensor
05. Focus Assist Beam
● Control Panel
11. < >Mode Selection Button/
Wireless Mode Selection
(Long Keypress)
12. < >Zoom / Function Custom
Button (Long Keypress)
13. < >Group/ Channel Setting
(Long Keypress)
14. < >Select Dial
06. Wireless Control Port
07. Sync Cord Jack
08. Hotshoe
09. Lock Ring
10. Battery Compartment
11
12
18
13
14
15
16
17
Fn
15. < > Set Button
16. ON/OFF Power Switch
17. < >Test Button / Flash
Ready Indicator
18. < >Focus Assist Beam /
High Speed Sync Button
(Long Keypress)
06
07
08
09
10
05
04
03
02
01
- 24 -
Name of Parts
● LCD Panel
19. <M>Manual Flash Mode
20. <S1>S1 Slave Flash Triggering
21. <S2>S2 Slave Flash Triggering
22. <Multi>Multi/Stroboscopic
Flash Mode
23. < >High Speed Sync
Triggering
24. < > Battery Level Indication
25. < > Sound Beep Indication
26. < >Sleep Status
27. < >Overtemperature
Indication
28. < >Wireless Signal
Transmission
29. < >Focus Assist Beam
Indicator
30. Channel
31. Group
22
23 21 242528
31
30
03
2627 2919
20
- 25 -
● What’s in the Box of TT600?
1. Flash unit 2. Mini stand 3. Protection case
4. Instruction manual
● Separately Sold Accessories
The product can be used in combination with the following
accessories sold separately, so as to achieve best photography
effects: Cells II high speed trigger, FT-16S power & trigger
control, Car charger, Mini softbox, White & Silver Reector,
Honeycomb, Color gels, Snoot, etc.
- 26 -
Using the Flash
Attach the Camera Flash.
● Slip the camera ash’s
mounting foot into the camera’s
hotshoe all the way.
Secure the Camera Flash.
● Rotate the locking screw on
the mounting foot until it locks
up.
Detach the Camera Flash.
● Rotate the locking screw
on the mounting foot until it is
loosened.
1.Power Management
Use ON/OFF Power Switch to power the ash unit on or off. Turn
off if it will not be used for an extended period of time. This ash
unit has Sleep Function and will enter into sleep status when there
is no operation for a long time. For Sleep Function setting, see the
following instruction.
2.Flash Output
● Flash output can be varied from 1/128th power to 1/1 full power
in 1/3 stop increments. To obtain a correct ash exposure, use
a hand-held ash meter to determine the required ash output.
● Adjust the power output by rotating Select Dial . The following
table makes it easier to see how the stop changes in terms off/
stop when you increase or decrease the ash output:
3. ZOOM: Setting the Flash Coverage
The ash coverage can be set to match the lens focal length from
24 mm to 200 mm. Press < > button and rotate Select Dial
<> to change the ash coverage.
Attaching to a Camera
Figures displayed when reducing ash output level
Figures displayed when increasing ash output level
When setting the ash coverage, make sure it covers the lens
focal length so that the picture will not have a dark periphery.
When “OF” is shown on the LCD display, it means no ash
output and ash ring is turned off.
1
2
3
1/1
1/1-0.3 1/1-0.7
1/2
1/2-0.3 1/2-0.7
1/4
...
OF
1/2+0.7 1/2+0.3 1/4+0.7 1/4+0.3 ...
- 27 -
Using the Flash
4. M Mode: Manual Mode
Press MODE Selection Button < > to enter M mode. In this
mode, you can set the ash unit onto your camera hot shoe or your
trigger hot shoe for ring. Before shooting, adjust the ash power
output. When the camera’s shutter is pressed, the ash will re
synchronously. Slave triggering mode is not available in M mode.
5. Multi Mode: Stroboscopic Flash
Press Mode Selection Button < > to enter Multi mode
(Stroboscopic ash). With stroboscopic ash, a rapid series of
ashes is red. It can be used to capture multiple images of a
moving subject in a single photograph. You can set the ring
frequency (number of ashes per sec. expressed as Hz), the
number of ashes, and the ash output. For setting procedures,
see the following:
Calculating the Shutter Speed
During stroboscopic ash, the shutter remains open until the ring
stops. Use the provided formula to calculate the shutter speed
required to capture the full sequence of ashes:
Number of ashes / Firing frequency = Shutter speed
For example, if the number of ashes is 10 and the ring frequency
is 5 Hz, the shutter speed should be at least 2 sec.
Note:
● Stroboscopic ash is most effective with a highly reective
subject against a dark background.
● Using a tripod and a remote switch is recommended.
● A ash output of 1/1 or 1/2 cannot be set for stroboscopic
ash.
● Stroboscopic ash can be used with “buLb”.
Press the Mode Selection
Button < > so that “Multi” is
displayed.
Press Set Button < > to
select the item to be set. The
item blinks.
Rotate Select Dial < > to
set a desired number.
1
2
3
Andere Handbücher für TT600
1
Inhaltsverzeichnis
Andere Godox Kamerablitz Handbücher
Godox
Godox V860IIIN Bedienungsanleitung
Godox
Godox WITSTRO+ AR400 Bedienungsanleitung
Godox
Godox TT600S Bedienungsanleitung
Godox
Godox Gemini GS series Bedienungsanleitung
Godox
Godox Mini Pioneer 120 Bedienungsanleitung
Godox
Godox Quicker300D Bedienungsanleitung
Godox
Godox thinklite TTL TT350 Bedienungsanleitung
Godox
Godox V860IIIO Bedienungsanleitung
Godox
Godox TT350C Bedienungsanleitung
Godox
Godox AD200 Pro Bedienungsanleitung
Godox
Godox TT350C Bedienungsanleitung
Godox
Godox WITSTRO+ AD600M Bedienungsanleitung
Godox
Godox Thinklite TT350O Bedienungsanleitung
Godox
Godox V860IIS Bedienungsanleitung
Godox
Godox WITSTRO AD400Pro Bedienungsanleitung
Godox
Godox Ving V860 Bedienungsanleitung
Godox
Godox witstro ad360II-c Bedienungsanleitung
Godox
Godox AD100Pro Bedienungsanleitung
Godox
Godox V860IIIN Bedienungsanleitung
Godox
Godox TT685N Thinklite TTL Bedienungsanleitung
