Godox V350F Bedienungsanleitung

INSTRUCTION MANUAL

说明手册

中英文双语 / Chinese English Bilingual

在使用本产品之前：

请先仔细阅读本手册，以确保您能安全使用。请保存好本手册以备将

来查询参考。

For FUJIFILM

Before using this product:

Please read this user manual carefully in order to ensure your safety

and the proper operation of this product. Keep for future reference.

705-V350F0-00

地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋

Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong

Town, Baoan District, Shenzhen 518103, China

电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423

邮箱/E-mail: [email protected]

http://www.godox.com

深圳市神牛摄影器材有限公司

GODOX Photo Equipment Co., Ltd.

Made In China

锂电机顶闪光灯

TTL

Pioneering Camera FlashTTL Li-ion

Thank you for purchasing this product.

This V350F camera flash applies to FUJIFILM series cameras and is

compatible with TTL autoflash. With this TTL compatible flash, your

shooting will become simpler. You can easily achieve a correct flash

exposure even in complex light-changing environments. This

camera flash features:

● GN36 (m ISO 100, @105mm).

● Pro 2000mAh Li-ion Battery –- 0.1s~1.7s recycle –- over 500 full

power pops.

● Fully support FUJIFILM TTL camera flash. Workable as Master or

Slave unit in a wireless flash group.

● With built-in 2.4GHz wireless remote system to support

transmitting and receiving.

● Provided multiple functions, include manual flash, multi flash, HSS

(up to 1/8000s), rear curtain sync, FEC, etc.

● Support with firmware upgrade.

Foreword

Always keep this product dry. Do not use in rain or in damp

conditions.

Do not disassemble. Should repairs become necessary, this

product must be sent to an authorized maintenance center.

Keep out of reach of children.

Stop using this product if it breaks open due to extrusion, falling

or strong hit. Otherwise, electric shock may occur if you touch

the electronic parts inside it.

Do not fire the flash directly into the eyes (especially those of

babies) within short distances. Otherwise visual impairment

may occur.

Do not use the flash unit in the presence of flammable gases,

chemicals and other similar materials. In certain circumstance,

these materials may be sensitive to the strong light emitting

from this flash unit and fire or electromagnetic interference may

result.

Do not leave or store the flash unit if the ambient temperature

reads over 50℃. Otherwise the electronic parts may be

damaged.

Turn off the flash unit immediately in the event of malfunction.

Warning

- 27 - - 28 -

Thank you for purchasing this product.

This V350F camera flash applies to FUJIFILM series cameras and is

compatible with TTL autoflash. With this TTL compatible flash, your

shooting will become simpler. You can easily achieve a correct flash

exposure even in complex light-changing environments. This

camera flash features:

● GN36 (m ISO 100, @105mm).

● Pro 2000mAh Li-ion Battery –- 0.1s~1.7s recycle –- over 500 full

power pops.

● Fully support FUJIFILM TTL camera flash. Workable as Master or

Slave unit in a wireless flash group.

● With built-in 2.4GHz wireless remote system to support

transmitting and receiving.

● Provided multiple functions, include manual flash, multi flash, HSS

(up to 1/8000s), rear curtain sync, FEC, etc.

● Support with firmware upgrade.

Foreword

Always keep this product dry. Do not use in rain or in damp

conditions.

Do not disassemble. Should repairs become necessary, this

product must be sent to an authorized maintenance center.

Keep out of reach of children.

Stop using this product if it breaks open due to extrusion, falling

or strong hit. Otherwise, electric shock may occur if you touch

the electronic parts inside it.

Do not fire the flash directly into the eyes (especially those of

babies) within short distances. Otherwise visual impairment

may occur.

Do not use the flash unit in the presence of flammable gases,

chemicals and other similar materials. In certain circumstance,

these materials may be sensitive to the strong light emitting

from this flash unit and fire or electromagnetic interference may

result.

Do not leave or store the flash unit if the ambient temperature

reads over 50℃. Otherwise the electronic parts may be

damaged.

Turn off the flash unit immediately in the event of malfunction.

Warning

- 27 - - 28 -

Foreword

Warning

Name of Parts

Body

Control Panel

LCD Panel

What's in the Box of V350F?

Separately Sold Accessories

Battery

Attaching to a Camera

Power Management

Flash Mode: TTL Autoflash

FEC (Flash Exposure Compensation)

High-Speed Sync

Second-Curtain Sync

Flash Mode – M: Manual Flash

Flash Mode – Multi: Stroboscopic Flash

Wireless Flash Shooting: Radio (2.4G) Transmission

Wireless Settings

Setting Master Unit’s Flash Mode

Setting the Communication Channel

Wireless ID Settings

TTL: Fully Automatic Wireless Flash Shooting

M: Wireless Flash Shooting with Manual Flash

Multi: Wireless Flash Shooting with Manual Flash

Other Applications

Auto Focus Assist Beam

Bounce Flash

Creating a Catchlight

ZOOM: Setting the Flash Coverage and Using the Wide Panel

Low Battery Indicator

C.Fn: Setting Custom Functions

Protection Function

Firmware Upgrade

Technical Data

Maintenance

Troubleshooting

Compatible Camera Models

Contents

Conventions used in this Manual

● This manual is based on the assumption that both the camera and

camera flash’s power switches are powered on.

● Reference page numbers are indicated by “p.**”.

● The following alert symbols are used in this manual:

The Caution symbol gives supplemental information.

The Note symbol indicates a warning to prevent shooting

problem.

Pioneering Li-ion Camera Flash

- 29 - - 30 -

Foreword

Warning

Name of Parts

Body

Control Panel

LCD Panel

What's in the Box of V350F?

Separately Sold Accessories

Battery

Attaching to a Camera

Power Management

Flash Mode: TTL Autoflash

FEC (Flash Exposure Compensation)

High-Speed Sync

Second-Curtain Sync

Flash Mode – M: Manual Flash

Flash Mode – Multi: Stroboscopic Flash

Wireless Flash Shooting: Radio (2.4G) Transmission

Wireless Settings

Setting Master Unit’s Flash Mode

Setting the Communication Channel

Wireless ID Settings

TTL: Fully Automatic Wireless Flash Shooting

M: Wireless Flash Shooting with Manual Flash

Multi: Wireless Flash Shooting with Manual Flash

Other Applications

Auto Focus Assist Beam

Bounce Flash

Creating a Catchlight

ZOOM: Setting the Flash Coverage and Using the Wide Panel

Low Battery Indicator

C.Fn: Setting Custom Functions

Protection Function

Firmware Upgrade

Technical Data

Maintenance

Troubleshooting

Compatible Camera Models

Contents

Conventions used in this Manual

● This manual is based on the assumption that both the camera and

camera flash’s power switches are powered on.

● Reference page numbers are indicated by “p.**”.

● The following alert symbols are used in this manual:

The Caution symbol gives supplemental information.

The Note symbol indicates a warning to prevent shooting

problem.

Pioneering Li-ion Camera Flash

- 29 - - 30 -

MODE ZOOM SYNC SLAVE

SET

01. Catchlight Panel

02. Built-in Wide Panel

03. Flash Head

04. Optic Control Sensor

05. Focus Assist Beam

06. Hotshoe

07. LCD Panel

08. Lock Ring

09. Battery Compartment

10. USB Port

● Body

11. <MODE>Mode Selection Button

12. <ZOOM>Zoom Selection Button

13.<SYNC>High-Speed Sync Button

14. <SLAVE> S1/S2 Optic Slave

Triggering Selection Button

(in non-wireless mode)

15. < > Power Switch

16. < > Test Button / Flash Ready

Indicator.

17. < >Custom Function Setting

Button (reusable button, long

press for 2 seconds)

18. < > Wireless Selection

Button (reusable button, long

press for 2 seconds)

19. <GR/CH> Group/Channel Button

(reusable button, in wireless

mode)

20. Select Dial

21.<SET> Set Button

● Control Panel

● LCD Panel

Name of Parts (1) TTL Autoflash

: High-speed

sync (Page 36)

12 13

17 18

Zoom : zoom display

TTL : TTL autoflash

Focus length

Flash exposure

compensation amount

(2)M Manual Flash M : Manual flash

Manual flash output

(3)Multi Flash

Multi : Stroboscopic flash

Number of flashes

Flash frequency

Flash mode

Channel

(4) Radio Transmission Shooting

● Master Unit

Firing group

● Slave Unit

Master

Slave

- 31 - - 32 -

MODE ZOOM SYNC SLAVE

SET

01. Catchlight Panel

02. Built-in Wide Panel

03. Flash Head

04. Optic Control Sensor

05. Focus Assist Beam

06. Hotshoe

07. LCD Panel

08. Lock Ring

09. Battery Compartment

10. USB Port

● Body

11. <MODE>Mode Selection Button

12. <ZOOM>Zoom Selection Button

13.<SYNC>High-Speed Sync Button

14. <SLAVE> S1/S2 Optic Slave

Triggering Selection Button

(in non-wireless mode)

15. < > Power Switch

16. < > Test Button / Flash Ready

Indicator.

17. < >Custom Function Setting

Button (reusable button, long

press for 2 seconds)

18. < > Wireless Selection

Button (reusable button, long

press for 2 seconds)

19. <GR/CH> Group/Channel Button

(reusable button, in wireless

mode)

20. Select Dial

21.<SET> Set Button

● Control Panel

● LCD Panel

Name of Parts (1) TTL Autoflash

: High-speed

sync (Page 36)

12 13

17 18

Zoom : zoom display

TTL : TTL autoflash

Focus length

Flash exposure

compensation amount

(2)M Manual Flash M : Manual flash

Manual flash output

(3)Multi Flash

Multi : Stroboscopic flash

Number of flashes

Flash frequency

Flash mode

Channel

(4) Radio Transmission Shooting

● Master Unit

Firing group

● Slave Unit

Master

Slave

- 31 - - 32 -

● Separately Sold Accessories

The product can be used in combination with the following

accessories sold separately, so as to achieve best photography

effects: XPro, X1T-F wireless flash trigger, Mini softbox, White &

Silver reflector, Honeycomb, Color gels, Snoot, etc.

● What’s in the Box of V350F?

1. Flash unit　2. Mini stand　3. Protection case　4. Diffuser　

5. Li-ion battery pack 6. Battery charger 7. Battery charger cable

8. Instruction manual

● Features

1. This flash unit uses Li-ion polymer battery which has long runtime.

The available charge-and-discharge times are 500.

2. It is reliably safe. The inner circuit is against overcharge,

overdischarge, overcurrent, and short circuit.

3. Take only 2.5 hours to fully charge the battery by using the

standard battery charger.

● Cautions

1. Do not short circuit.

2. Do not expose to rain or immerse into water. This battery is not

water proof.

3. Keep out of reach of children.

4. No over 24 hours’continuous charging.

5. Store in dry, cool, ventilated places.

6. Do not put aside or into fire.

7. Dead batteries should be disposed according to local regulations.

8. Please charge the battery to approx. 60% before being placed for

long time.

9. If the battery had ceased using for over 3 months, please make a

full recharge.

● Loading and Unloading the Battery

Battery

To load the battery, push the

1battery compartment cover

downward and open it, and

the battery pack will pop out.

To load the battery, according

2to the triangle sign on the

battery pack, insert it into the

compartment until it is locked.

Then close the compartment.

● Battery Level Indication

Make sure the battery pack is securely loaded in the flash. Check

the battery level indication on the LCD panel to see the remaining

battery level.

Battery Level Indication

2 grids

1 grid

Blank grid

Blinking The battery level is going to be used out

immediately. And the flash will auto power off

in 1 minute.

Note: Please recharge the battery as soon as

possible (within 10 days). Then, the battery can be

used or be placed for long period.

Meaning

Full

Middle

Low

- 33 - - 34 -

● Separately Sold Accessories

The product can be used in combination with the following

accessories sold separately, so as to achieve best photography

effects: XPro, X1T-F wireless flash trigger, Mini softbox, White &

Silver reflector, Honeycomb, Color gels, Snoot, etc.

● What’s in the Box of V350F?

1. Flash unit　2. Mini stand　3. Protection case　4. Diffuser　

5. Li-ion battery pack 6. Battery charger 7. Battery charger cable

8. Instruction manual

● Features

1. This flash unit uses Li-ion polymer battery which has long runtime.

The available charge-and-discharge times are 500.

2. It is reliably safe. The inner circuit is against overcharge,

overdischarge, overcurrent, and short circuit.

3. Take only 2.5 hours to fully charge the battery by using the

standard battery charger.

● Cautions

1. Do not short circuit.

2. Do not expose to rain or immerse into water. This battery is not

water proof.

3. Keep out of reach of children.

4. No over 24 hours’continuous charging.

5. Store in dry, cool, ventilated places.

6. Do not put aside or into fire.

7. Dead batteries should be disposed according to local regulations.

8. Please charge the battery to approx. 60% before being placed for

long time.

9. If the battery had ceased using for over 3 months, please make a

full recharge.

● Loading and Unloading the Battery

Battery

To load the battery, push the

1battery compartment cover

downward and open it, and

the battery pack will pop out.

To load the battery, according

2to the triangle sign on the

battery pack, insert it into the

compartment until it is locked.

Then close the compartment.

● Battery Level Indication

Make sure the battery pack is securely loaded in the flash. Check

the battery level indication on the LCD panel to see the remaining

battery level.

Battery Level Indication

2 grids

1 grid

Blank grid

Blinking The battery level is going to be used out

immediately. And the flash will auto power off

in 1 minute.

Note: Please recharge the battery as soon as

possible (within 10 days). Then, the battery can be

used or be placed for long period.

Meaning

Full

Middle

Low

- 33 - - 34 -

C.Fn

Attaching to a Camera

Attach the Camera Flash.

1● Slip the camera flash’s

mounting foot into the

camera’s hotshoe all the

way.

Secure the Camera Flash.

2● Rotate the lock ring on the

mounting foot until it locks

up.

Detach the Camera Flash.

3● Rotate the lock ring on the

mounting foot until it is

loosened.

Power Management

Use Power Switch to power the flash unit on (Long press the

button for one second) or off. Turn off if it will not be used for an

extended period of time. Setting as a master flash, it will turn the

power off automatically after a certain period (approx. 90 seconds)

of idle use. Pressing the camera shutter halfway or pressing any

flash button will wake up the flash unit. Setting as a slave flash, it

will enter sleep mode after a certain period (adjustable, 60 minutes

by default) of idle use. Pressing any flash button will wake it up.

Disabling Auto Power Off function is recommended

when the flash is used off camera. (C.Fn-ST, Page 47)

Flash Mode: TTL Autoflash

This flash has three flash modes: TTL, Manual (M), and Multi

(Stroboscopic). In TTL mode, the camera and the flash will work

together to calculate the correct exposure for the subject and the

background. In this mode, multiple TTL functions are available:

FEC, HSS, second curtain sync, etc.

* Press <MODE> Mode Selection Button and three flash modes will

display on the LCD panel one by one with each pressing.

TTL Mode

Press <MODE> Mode Selection Button to enter TTL mode. The

LCD panel will display <TTL>.

● Press the camera release button halfway to focus.

● When the shutter button is fully pressed, the flash will fire a pre-

flash that the camera will use to calculate exposure and flash

output the instant before the photo is taken.

Display“HI”: When the flash output value is up to the maximum

value, “HI”will be displayed and blinking for 3 seconds. Adjust

the camera’s parameters if underexposure appears.

Display“Lo”: When the flash output value is up to the minimum

value, “Lo”will be displayed and blinking for 3 seconds. Adjust the

camera’s parameters if overexposure appears.

- 35 - - 36 -

　　 FEC: Flash Exposure Compensation

With FEC function, this flash can adjust from -3 to +3 in 1/3rd stops.

It is useful in situations where minor adjusting of the TTL system is

needed based on the environment.

Setting FEC:

Turn the Select Dial to set the

2amount.

● “0.3”means 1/3 step,

“0.7”means 2/3 step.

● To cancel the flash

exposure compensation,

set the amount to “+0”.

Press < SET > button again

3to confirm the setting.

Press the SET Button and

1the flash exposure

compensation amount will be

highlighted on the LCD panel.

SET

MODE ZOOM SYNC SLAVE

SET

MODE ZOOM SYNC SLAVE

SET

Andere Handbücher für V350F

Inhaltsverzeichnis

Andere Godox Kamerablitz Handbücher

Godox

Godox Knowled M600D Bedienungsanleitung

Godox

Godox Thinklite TT350P Bedienungsanleitung

Godox

Godox V350O Bedienungsanleitung

Godox

Godox Macro Ring Flash ML-150 Bedienungsanleitung

Godox

Godox WITSTRO+ AD360 Bedienungsanleitung

Godox

Godox witstro ad360II-c Bedienungsanleitung

Godox

Godox AD200 Pro Bedienungsanleitung

Godox

Godox V1 Bedienungsanleitung

Godox

Godox V860 III Bedienungsanleitung

Godox

Godox V860II Bedienungsanleitung

Godox

Godox ThinkLite TT680-N Bedienungsanleitung

Godox

Godox Thinklite TT350O Bedienungsanleitung

Godox

Godox TT685N Thinklite TTL Bedienungsanleitung

Godox

Godox TT350-F Bedienungsanleitung

Godox

Godox AT Series Bedienungsanleitung

Godox

Godox TTL V860 II N Bedienungsanleitung

Godox

Godox QS400II Bedienungsanleitung

Godox

Godox TT685C Bedienungsanleitung

Godox

Godox WITSTRO AD400Pro Bedienungsanleitung

Godox

Godox V860 III Bedienungsanleitung

Godox

Godox SK300II Bedienungsanleitung

Godox

Godox QS-800 Bedienungsanleitung

Godox

Godox WITSTRO+ AD600M Bedienungsanleitung

Godox

Godox ThinkLite TT520 II Bedienungsanleitung

Beliebte Kamerablitz Handbücher anderer Marken

Canon

Canon 5246B002 Bedienungsanleitung

Sigma

Sigma EF-610 DG SUPER - Bedienungsanleitung

Sony

Sony HVL-FDH4 Bedienungsanleitung

Sony

Sony HVL-RLA Bedienungsanleitung

Nikon

Nikon SB-28 Bedienungsanleitung

Olympus

Olympus FL 36R Bedienungsanleitung

Nikon

Nikon BC-7 Bedienungsanleitung

Nikon

Nikon SB-800 Bedienungsanleitung

DÖRR

DÖRR DFX-300 Bedienungsanleitung

Altura Photo

Altura Photo AP-305N Bedienungsanleitung

Canon

Canon SPEEDLITE 300EZ Bedienungsanleitung

Sunpak

Sunpak 622 Super Pro-System Bedienungsanleitung

Polaroid

Polaroid PL108-AF Bedienungsanleitung

Pentax

Pentax AF240Z Bedienungsanleitung

Pixapro

Pixapro Li-ion 350 II N Bedienungsanleitung

Canon

Canon 430EX - Speedlite II - Hot-shoe clip-on... Bedienungsanleitung

Opus

Opus OPL-M40 Bedienungsanleitung

Nissin

Nissin Mark II Di866 Pofessional Bedienungsanleitung