Godox S60 Bedienungsanleitung
Instruction Manual
705-S60000-00
Made in China
: 2
: 0755-29609320(8062) : 0755-25723423 : godox@godox.com
godox.com
Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District,
Shenzhen, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: [email protected]
GODOX Photo Equipment Co., Ltd.
LED
Focusing LED Light
LEDS60
•
•
•
• 2.4GDMX
•
•
•
• /
•
- 01 - - 02 -
1.
2.
3.
4.
5.
6.
7.
8.
*1 *1 *1
*1
- 03 - - 04 -
*1
*1
*1
•
1.
2.
3. MENU
4. FX
5.
6. SET
7. +-
8. DMX
()
9. DMX
()
10.
11.
12.
13.
14.
15.
16.
SA-02
60mm
SA-07
SA-10
SA-06
SA-05
SA-P
(SA-01 85mm)
SA-01
85mm
SA-11C()
SA-11T()
SA-03
150mm
SA-09
RC-A6
• DC
V
• V()
1.
2.
15°
15°
3.
- 05 - - 06 -
V14.8V
16.8V
0%-50%。
•
LEDLED
•
+-
(0~100%)
•
FX
+-FX
8(OFF/1~8),
FX1 FX2 FX3 FX4 FX5 FX6 FX7 Fx8
Flash 1 Flash 2 Flash 3 Storm 1 Storm 2 Storm 3 TV
FXSET
1~8FX
OFFFX
•
LEDS602.4GRC-A6
2.4G16LED32
99ID
LED(CH),(GR)ID
LED
• 1. 2.4G
MENU+-
CHGRID
CHSET
+-(CH)
(1~32)SET
• CH/GR/ID
GRSET
+-(GR)
(A-F0-9), SET
- 07 - - 08 -
IDSET
+-ID(1~99 / OFF)
SET
MENU
10
MENU
+-
• 2.
2.1 &
SET2
MENU
LED
APP
APP
2.2 Godox Light
APP
APPAPP
MENU+-
DMX
SET
+-DMX
(1~512)10
SET
MENU
n()
n+1
n+2
CCT FX
0-51 52-255
DMX*(100/255)
0-100%
DMX*(100/255)
0-100%
DMX*(/255) 8,
DMX=160,
160*8/255=5
DMX
• 3. DMX
- 09 - - 10 -
LED
100%(LUX)
1()
CRI
TLCI
(CH)
(GR)
2.4G
()
()
S60
AC 100~240V 50/60HZ 0.9A.MAX
V 14.8V
60W
5600K±300K
() 3200
() 40000
≥96
≥97
0~100%
321~32
16A~F, 0-9
6°-55°
-10~40°C
APP/2.4G/DMX
50
264*107*100mm
268*113*64mm
1.36kg
0.94kg
*
• 1
• LED
•
•
•
•
•
: CMIIT ID:2020DP13510
Foreword
Warning
Thank you for purchasing Godox product!
Focusing LED Light S60 is excellent for product shooting, photojournalistic and video
recording, etc. It creates stable light resource and even illumination for photography.
This light's brightness can be precisely adjusted with easy operation.
Main Features:
• With specially designed lens to gain soft and even light effect from center to edge
• Adjustable focusing range and light brightness enable you to observe the variation
of shadow's hardness, dimension and edge contrast
• Precisely control the light and achieve more creative light effects when use in
combination with abundant accessories
• Three ways of power supply (5V/7.4V/15V) offer great convenience, portability and
wide application
Do not disassemble or modify. Should the product break down, send the
defective back to the authorized service center for inspection and
maintenance.
If this product overheats, it will cease operation and resume working after
cooling down. This is due to the built-in over-temperature protection.
As this product adopts make and break device, please keep it easy to be
used.
Keep dry. Do not handle with wet hands, immerse in water, or expose to rain.
Do not place in high temperature or high humidity conditions.
Keep out of reach of children.
Disconnect from the power supply when it will not be used for an extended
period.
- 11 - - 12 -
Name of Body
1. Body
2. Direction Adjusting Bracket
3. Lens
4. Accessory Latch
5. Select Dial
6. Fixing Knob
7. Thermovent
8. Power Socket
• Main Body • Controller
1. Display
2. Power Switch
3. MENU Button
4. FX Button
5. Fan Switch
6. SET Button
7. + - Select Dial
8. DMX Output
Port (male)
9. DMX Output
Port (female)
10. Power Input
11. Power Output
12. Battery Clip
13. Battery Release
Button
14. Battery
Compartment
15. Battery Base
16. Steel Cable
- 13 - - 14 -
Included Items
Light Body *1 Controller *1 Barndoor Set *1 Wrench *1
Instruction Manual *1Power Cable *1 Connect Cable *1
Optional Accessory
The product can be used in combination with the following accessories
sold separately, so as to achieve best photography effects.
RC-A6
Remote Control
SA-09
GOBO Set
SA-10
GOBO Holder
SA-05
Scrim Set
SA-06
Iris Diaphragm
SA-P
Projection Attachment
(included a SA-01 85mm Lens)
SA-02
60mm Wide-angle
Lens
SA-01
85mm Lens
SA-03
150mm Telephoto
Lens
SA-07
Framing Shutter
SA-11C
(Color effects set)
SA-11T
(Color temperature
adjustment set)
Color Filter
- 15 - - 16 -
Power Supply
Display FX1 FX2 FX3 FX4 FX5 FX6 FX7 FX8
Scene Flash 1 Flash 2 Flash 3 Storm 1 Storm 2 Storm 3 TV Broken bulb
1. Insert the two ends of power source connect
cable into the controller’s power output port and
light’s power input port until a “click” can be
heard.
Pull out the connect cable: press down the
PUSH button and pull out the cable
simultaneously.
2. Insert the power cable’s output end into the
controller’s input port. Then, rotate it rightwards
to 15° until a “click” can be heard.
Pull out the power cable: press the PUSH button
on the output end of power cable and rotate it
leftwards to 15°to pull out.
3. Connect power cable into the power source.
DC Power Supply
Install the V-port battery onto the controller’s
battery compartment. Then, power the light on to
operate.
V-port Battery Power Supply (Optional)
Operation
• Power switch:
Short press the power switch, and the LED light will be
lighted on. Press the button again to turn off the light.
• Brightness adjustment:
In the main interface, turn the select dial to adjust
brightness from 0% to 100%.
• Light effects setting:
In normal status, short press the FX button once to
enter the setting interface. Then, turn the select dial to
choose light effects from OFF and 1 to 8.
Short press the FX button or SET button to exit from light effects modes and back
to the main interface after settings finished.
Note: If a light effect is selected from 1 to 8, the FX icon and light effects will be displayed
on the main interface. And the brightness can be adjusted. The color temperature will not
be displayed.
If choose OFF, the color temperature will be displayed instead of FX icon.
• Silent Mode:
In normal status, short press the Fan button to turn
it on or off. When turning off the fan, the LED light will
enter silent mode. And the icon will be displayed
and the brightness will be adjusted from 0% to 50%.
Note: the fan will be turned on by default and there is
no icon appeared on the display.
- 17 - - 18 -
Note: please use the standard V-port battery with
14.8V standard voltage. Do not supply power with
the battery whose voltage is over 16.8V.
Inhaltsverzeichnis
Andere Godox Beleuchtungsausrüstung Handbücher
Godox
Godox TL-5 Bedienungsanleitung
Godox
Godox LR160 Bedienungsanleitung
Godox
Godox ML30 Bedienungsanleitung
Godox
Godox LEDP120C Bedienungsanleitung
Godox
Godox TL30 Bedienungsanleitung
Godox
Godox LC500 Bedienungsanleitung
Godox
Godox RING72 Bedienungsanleitung
Godox
Godox SL Series Bedienungsanleitung
Godox
Godox SL200IIBi Bedienungsanleitung
Godox
Godox LED1000 Bedienungsanleitung
Godox
Godox ML60 LED Light Bedienungsanleitung
Godox
Godox Quicker600IIM Bedienungsanleitung
Godox
Godox Lux Junior Bedienungsanleitung
Godox
Godox VL150 Bedienungsanleitung
Godox
Godox R1 Bedienungsanleitung
Godox
Godox DS300II Bedienungsanleitung
Godox
Godox ML60 Bedienungsanleitung
Godox
Godox SL Series Bedienungsanleitung
Godox
Godox ML-150 II Bedienungsanleitung
Godox
Godox UL60Bi Bedienungsanleitung
Beliebte Beleuchtungsausrüstung Handbücher anderer Marken
Qazqa
Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung
Commercial Electric
Commercial Electric 54568141 Bedienungsanleitung
CREE LIGHTING
CREE LIGHTING 304 Series Bedienungsanleitung
Goobay
Goobay 49867 Bedienungsanleitung
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Bedienungsanleitung
Alkalite
Alkalite Krypton KT-81 Bedienungsanleitung
