gofanco PRO-SDIGen Bedienungsanleitung
®
PRO-SDIGen
Congratulaons for owning a gofanco product. Our products aim to meet all your
connecvity needs wherever you go.
Have fun with our products!
Please read this manual carefully before rst use.
If you need more informaon about our products, please visit www.gofanco.com.
For technical support, please email us at support@gofanco.com.
For drivers/manuals download, please go to hp://www.gofanco.com/downloads.
®
PRO-SDIGen
Please read all of these instructions carefully before you use the device. Save
this manual for future reference.
The PRO-SDIGen 12G/6G/3G/HD/SD-SDI Pattern Generator with LED monitor
has been tested for conformance to safety regulations and requirements, and
has been certied for international use. However, like all electronic equipment,
the PRO-SDIGen should be used with care. Please read and follow the safety
instructions to protect yourself from possible injury and to minimize the risk of
damage to the unit.
• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where explained in this
manual.
• Provide proper ventilation and air circulation and do not use near water.
• Keep objects that might damage the device and assure that the placement of
this unit is on a stable surface.
• Use only the power adapter and power cords and connection cables designed
for this unit.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the po-
wer to the device before cleaning.
1. Safety and Notice
Table of Contents
1. Safety and Notice ..................................................................3
2. Introduction .......................................................................4
3. Features...........................................................................4
4. Specication ......................................................................5
5. Package Contents ..................................................................6
6. Panel Description ..................................................................7
7. Connection Diagram ...............................................................8
8. Notice.............................................................................8
9. Appedix ...........................................................................9
10. LearningWarranty.................................................................11
3
®
PRO-SDIGen
• Supported output resolution
NTSC 525@60, PAL 625@50,
[email protected]/50/59.94/60,
1080i@50/59.94/60,
[email protected]/24/25/29.97/30/50/59.94/60,
[email protected]/24/25/29.97/30/50/59.94/60
• Bit Rate
2.97 Gbps, 2.967 Gbps, 1.485 Gbps, 1.4835 Gbps, 5.94Gbps,
5.934Gbps, 11.88Gbps, 11.868Gbps,270 Mbps
• Video Patterns
100% Color Bars, Borderline, Random Noise, Check Field, Black, Verti-
cal Lines, Black / White alternate elds, Full Grey / Full White, Black to
White Gradient, Random Generator for all still patterns, moving squa-
res White noise, Inverse eect with still pattern, Scrolling Title (see
Appendix for illustrations)
• Save Settings to Memory Option
• Control
By LCM, panel buttons & rotary switch
• Video Output
SDI output (SDI, HD-SDI, 3G-SDI, 6G-SDI, 12G-SDI)
• Supports Preset Modes
3. Features
The PRO-SDIGen 12G/6G/3G/HD/SD-SDI Pattern Generator with LED monitor
is an advanced SDI pattern generator with multi-format (12G/6G/3G/HD/SD)
and multi-pattern support. Besides still and moving video test patterns, other
features such as audio (SMPTE-291M) are also provided. PRO-SDIGen can sup-
port up to 8 channel AES compliant audio with 48KHz sample rate. PRO-SDI-
Gen is equipped with four buttons, one rotary switch and LCD screen for easy
device control. This device provides a cost eective way to calibrate and test
SDI enable video devices and displays.
2. Introduction
4
®
PRO-SDIGen
5
4.Specications
Item Description
Technical
Hardware type Pattern generator
SDI standards 12G/6G/3G/HD/SD-SDI
Auto SDI
rate detection Yes
Supported
protocols
SMPTE 259M (270Mbps / 360Mpbs)
SMPTE 292M / HDTV (1.485 & 1.485/1.001Gbps)
SMPTE 424/425M (2.97 & 2.97/1.001Gbps)
SMPTE ST-2081 (5.94&5.94/1.001Gbps)
SMPTE ST-2082 (11.88&11.88/1.001Gbps)
Video support 11.88Gpbs
Audio support 270 / 1483 / 1485 / 2967 / 2970 / 5934 / 5940 / 11868 / 11880 Mbps
Resolution
support
[12G] 4K2K@50/59.94/60
[6G] [email protected]/24, 25, 30
[3G] 1080p@50/59.94/60 (4:2:2)
[HD] 720p50/59.94/60,
1080p24/30, 1035i50/59.94/60,
1080i50/59.94/60
[SD] [email protected], PAL@50Hz
PCB stack-up SMPTE-292M / 259M / 424M / ST-2081 / ST-2082
Input 75
Output [12G-SDI] up to 50m (165ft) / [6G-SDI] up to 100m (330ft) /
[3G-SDI] up to 200m (660ft)
HDMI Input
selection Yes
IR remote control 6-layer board [impedance control — dierential 100 ; single 75 ]
HDMI connector 4x BNC [SDI]
RJ-45 connector 75 interlocking socket
RS-232 connector Amplitude: Within 800mV <10%Long time jitter <1.0 UI
Rise overshoot: Less than 2% Timing jitter <1.0 UI
Fall overshoot: Less than 2% Alignment jitter <0.2 UI
®
PRO-SDIGen
Mechanical
Housing Metal enclosure
Dimensions
[L x D x H]
Model 167 x 112 x 24mm[6.5" x 4.4" x 0.9"]
Package 325 x 196 x 92mm[12.7" x 7.7" x 3.6"]
Carton 490 x 426 x 352mm[1'6" x 1'4" x 1'2"]
Weight Model 303g [0.6 lbs]
Package 533g [1.1 lbs]
Power supply 12VDC
Power consumption 5 Watts [max]
Operation temperature 0~40°C [32~104°F]
Storage temperature -20~60°C [-4~140°F]
Relative humidity 20~90% RH [no condensation]
6
• 1x PRO-SDIGen
• 1x 12V power supply unit
• 1x User Manual
5. Package Contents
®
PRO-SDIGen
6. Panel Description
1. SDI OUT1-2: 12G/6G/3G/HD/SD-SDI output
2. SDI OUT3-4: 3G/HD/SD-SDI outpu
3. Rotary Switch: For 0-7 preset mode
4. LCD: 2.0” LCD monitor
5. PUSH BUTTON:
7
2 3 5 6 7 841
Button Function
Menu Opens the OSD
Enter Enter the menu item
Up Choose the last menu item
Down Choose the next menu item
6. Micro USB: Micro-USB port for F/W update
7. +12V DC: 12V DC power jack
8. Power Switch: Power ON/OFF
®
PRO-SDIGen
7. Connection Diagram
8. Notice
8
1. Due to the high frequency bandwidth and low jitter requirement of SDI signals,
it is strongly recommended to use just one SDI OUTPUT with one 75 ohm.
2. Features such as new timings, test patterns and menu items, due to rmware or
other updates is subject to change without further notice.
®
PRO-SDIGen
9
9. Appendix
Built-in Video Patterns
®
PRO-SDIGen
10
Inhaltsverzeichnis
Andere gofanco Tragbarer Generator Handbücher
