Gofanco HDRswitch5P Bedienungsanleitung

5x1 HDMI 2.0 HDR Switch

User's Guide

G4-0059A

P/N: HDRswitch5P

Thank you for purchasing from gofanco. Our

products aim to meet all your connectivity needs

wherever you go. For optimum performance

and safety, please read the instructions carefully

and keep this User’s Guide for future reference.

If you need more information about our

products, please visit www.gofanco.com. For

technical support, please email us at

[email protected]. For drivers/manuals

download, please go to www.gofanco.com/

download.

Important Safety Notices

Please read safety instructions carefully before

installation and operation.

• Please pay close attention to all warnings

and hints for this device

• Do not expose this unit to rain, heavy

moisture, or liquid

• Do not repair the device or open the

enclosure without professional guidance

to avoid electric shocks. Doing so may void

your warranty

• Keep the product in a well-ventilated

location to avoid damage from overheating

• Shut off power and make sure environment

is safe before installation

• Do not plug the HDMI cables in/out when

the device is in use to avoid cable damage.

Make sure they are plugged into the correct

ports

• UsetheincludedDC5Vpoweradapteronly.

Makesurethe specification matches if using

3rd-party DC power adapters

Introduction

The 5x1 HDMI 2.0 HDR Switch allows you to

selectandswitchbetween5HDMIsourcedevices

to display on 1 HDMI display.

Features

• Allows 5 HDMI source devices to be

switched/routed to 1 display

• Supports 4K @60Hz YUV 4:4:4, HDR, 3D

• Included IR remote control allows you to

select and switch source devices

• Compliant with HDMI 2.0, HDCP 2.2 with

18Gbps bandwidth

PackageContents

• 5x1 HDMI 2.0 HDR Switch

• Remote controller

• Power adapter

• User's guide

Installation Requirements

1. HDMI source device (computer, DVD

player, XBOX, PS3, etc)

2. HDMI display device (SDTV/Monitor,

HDTV/Monitor, projector, etc.)

3. HDMI cables

Layout

Figure 1: Switch

Power LED IR Window

Input LED Device Selection

HDMI Output

HDMI Input RS232

Power Jack

Power LED Lights up when the switch is powered on

Input LED Displays the selected HDMI source device

IR Window Receives commands from the included

remote controller

Device Selection Press the button to change source device

HDMI Output Connects to your HDMI display device

HDMI Input Connects to your HDMI source devices

RS232 Connects to an RS232 enabled computer for

device control

Power Jack Connects to the included power adapter

Hardware Installation

1. Power off all devices including your HDMI

source and HDMI display(s).

2. Connect your HDMI source devices to the

Switch'sHDMIInputconnectorswithHDMI

cables (HDMI cables not included).

3. Connect your HDMI display to the Switch's

HDMIouput connector with an HDMIcable

(HDMI cable not included).

4. Plug the included power adapter into the

Switch's Power Jack, then plug the power

adapter into a reliable power source.

5. Power on all connected devices.

6. The Switch is ready for use.

Remote Controller

Figure 2: Remote Controller

1. Power Button Powers On / Off

the Switch

2. Left and Right

Selects the

source device in

numerical order

3. Device Selection

Press the number

button to select

the source device

as needed

Connection Diagram

HDMI Switch

Power

Adapter

Computer

Display

DVD

DVDDVD

DVD

RS232 Operation

Use an RS232 terminal program such as PComm

or Hyperterminal. The examples shown are

using PComm terminal program.

1. Connect the switch to your computer using

an RS232 cable (cable not included).

2. Open your RS232 terminal program.

3. Configure the terminal program: Baud rate:

9600; Data bits: 8; Parity: none; Stop bits: 1.

See Figure 4.

Figure 3: Connection Diagram

Figure 4: RS232 Settings

4. In the Terminal window, type in the desired

command. See RS232 commands on the

next page.

Figure 5: Terminal Window

FAQ & Solutions

Q: There is no video output or audio and

video display is not normal.

A: 1) Check the power adapter connection and

make sure the Switch's Power LED is on.

2) Check whether the HDMI cables are

connected properly.

3) Check the TV is set to the correct HDMI

input.

Q: The display is unstable or pixilated.

A: 1) Check whether the HDMI cables are

connected properly.

2) Connect the HDMI source directly to the

TV for proper connection.

3) Try different HDMI cables.

Command Result

PA1R Select HDMI Input 1

PA2R Select HDMI Input 2

PA3R Select HDMI Input 3

PA4R Select HDMI Input 4

PA5R Select HDMI Input 5

ONR Power on the switch

OFFR Power off the switch

RS232 Commands

Specifications

Item Specification

Input ports 5x, HDMI Type-A, 19-pin, Female

Output ports 1x, HDMI Type-A, 19-pin, Female

HDMI version HDMI 2.0

HDCP version HDCP 2.2

Input resolution 4Kx2K@30/60Hz HDR, 3D, 12-bit

Full HD

Output resolution 480i/480p/576i/576p/1080i/

1080p/4Kx2K@24/25/30/60 Hz

HDR Supported

Audio Direct Stream Digital (DSD) and

HD (HBR) audio

Operating temperature 32 - 140 F (0 - 60 C)

Power consumption <5W

Dimensions 8.58" (L) x 3.10" (H) x 0.81" (W)

Inhaltsverzeichnis

Andere gofanco Schalten Handbücher

gofanco

gofanco USBCMST2DP Bedienungsanleitung

gofanco

gofanco KVMHD2-4P Bedienungsanleitung

gofanco

gofanco HDRswitch3P Bedienungsanleitung

gofanco

gofanco USBCMST2HD-4K60 Bedienungsanleitung

gofanco

gofanco Switch41-HD20 Bedienungsanleitung

gofanco

gofanco SwitchBYOD41 Bedienungsanleitung

gofanco

gofanco KVMScaler2P Bedienungsanleitung

gofanco

gofanco Prophecy PRO-KVMaud4P Bedienungsanleitung

gofanco

gofanco KVMHD2-2P Bedienungsanleitung

gofanco

gofanco Matrix88HD20-Pro Bedienungsanleitung

gofanco

gofanco DP14MST2HD Bedienungsanleitung

gofanco

gofanco Switcher3P Bedienungsanleitung

gofanco

gofanco PRO-QuadView Bedienungsanleitung

gofanco

gofanco Switcher5p Bedienungsanleitung

gofanco

gofanco Switch3P-HD20 Bedienungsanleitung

gofanco

gofanco DPMST2DP Bedienungsanleitung

gofanco

gofanco Matrix44HD2-LT Bedienungsanleitung

gofanco

gofanco mDPMST2DP Bedienungsanleitung

gofanco

gofanco EthSwitch24P-2 Bedienungsanleitung

gofanco

gofanco KVMDP-2P Bedienungsanleitung

gofanco

gofanco EthSwitch24P Bedienungsanleitung

gofanco

gofanco Prophecy PRO-KVMDP-4P Bedienungsanleitung

gofanco

gofanco USBCMST3VID Bedienungsanleitung

gofanco

gofanco HDRswitch4P-Aud Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

gofanco HDRswitch5P Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken