Goldair PLATINUM GPPF200 Bedienungsanleitung

40cm Pedestal Fan with WiFi

Operating Instructions

Model: GPPF200

WiFi –Downloading and Setting up APP

This APP is supported only on 2.4GHz Wi-Fi channels.

The Goldair app and device pairing process require your 2.4ghz connection to

be separated from your 5ghz connection. For instructions on how to do this

please contact your internet provider.

•Tap REGISTER near the bottom of the screen.

•Read and agree to the Privacy Policy.

•Add your email address.

•Tap 'Obtain verification code'

You will then receive an email with a verification

code.

Download Goldair mobile APP

•Open the APP Store or Google Play on your mobile phone.

•Open 'Search' and enter 'Goldair'

•Click 'GET' and begin to download and install.

Once downloaded to your phone open the APP

•Enter the verification code from your email.

•Create a password.

•Then tap confirm.

If you haven't received a verification code via

email, tap the resend button and when the

verification code is received follow above steps.

Your APP is now registered and ready for pairing

to your device.

Pairing APP to Device

Connect with 2.4ghz Wifi Network

On the Home screen,

tap ‘Add Device’ or

the ‘+’ icon.

Using the categories on

the left, navigate to

your device and tap on

the image.

Confirm you are connected

to a 2.4ghz network. If your

2.4ghz and 5ghz networks

are dual banded, click

‘Common router setting

method’ on how to split, or

contact your internet

provider.

Pairing APP to Device

Connect with 2.4ghz Wifi Network: EZ Mode

The app will default to EZ Mode in the

right hand corner.

Ensure your device’s Wifi LED is flashing

rapidly.

If it is not, hold down the ‘TIMER’

button for 5 seconds or until the Wifi

icon begins to flash.

Click ‘Confirm indicator rapidly blink’

and ‘Next’

See instructions below to finalise your device pairing via EZ mode.

Your device will now pair with the app.

Please ensure your device, modem and

phone are as close together as possible

and that your 2.4ghz Wifi signal is strong.

Once the device has paired, choose

to rename it by tapping the Pen icon

Choose the most suitable room type and

click ‘Done’ in the top right hand corner.

Pairing APP to Device

Change ‘EZ Mode’ to ‘AP Mode’ by

clicking in the top right hand corner

Ensure your device’s Wifi LED is

flashing slowly.

If it is not, hold down the ‘TIMER’

button for 5 seconds or until the

Wifi icon begins to flash.

Click ‘Confirm indicator slowly

blink’ and ‘Next’

Click ‘Go Connect’ to

connect to the device’s

Hotspot by selecting the

network highlighted on the

screen in your app, e.g.

‘SmartLife- XXXX’

Select the device’s Hotspot

network and you will be returned

to the app. If not, navigate back to

the Goldair app.

Note- if you get a notification

saying ‘Internet may not be

available’ press Dismiss.

Your device will now pair

with the app.

Please ensure your

device, modem and

phone are as close

together as possible.

Connect with 2.4ghz Wifi Network: AP Mode

See instructions below to finalise your device pairing via AP Mode.

Once the device has paired,

choose to rename it by

tapping the Pen icon

Choose the most suitable

room type and click ‘Done’

in the top right hand

corner.

Pairing APP to Device

Connect with Bluetooth

On the Home screen, tap ‘Add

Device’ or the ‘+’ icon.

Ensure your device’s Wifi LED is

flashing rapidly.

If it is not, hold down the ‘TIMER’

button for 5 seconds or until the

Wifi icon begins to flash.

On the top right, click ‘Auto

Scan’

The app will now scan for

Bluetooth devices.

When your device appears, click

on the image.

As an alternative way of connecting your device, you can pair via Bluetooth. Please

ensure you have Bluetooth switched on on your mobile phone.

Choose your 2.4ghz Wifi

network and add in the

password. Click ‘Next’

Your device will now pair

with the app.

Please ensure your

device, modem and

phone are as close

together as possible.

Once the device has paired,

choose to rename it by

tapping the Pen icon

Choose the most suitable

room type and click ‘Done’

in the top right hand

corner.

Operating your Fan from the APP

Mobile phone remote operation (connect fan

power and turn on the side switch, so that the fan

is in standby mode).

POWER

Open the “GOLDAIR" APP to select the fan (when

using one mobile phone to control multiple fans,

you need to select the fan to be operated).

•Tap the Switch icon and the fan will turn on.

Tap it again to turn the fan off.

WIND SPEED

Tap the Wind Speed bar to amend the speed level

from 1 (Low), 2 (Medium) and 3 (High).

MODE

There are 3 modes the fan can go into. To select

the mode press the Mode icon.

NORMAL –this is the standard and default mode of

the fan.

NATURAL –this mode attempts to mimic the

outdoor natural wind type of by constantly

changing the wind speed.

SLEEP –this mode is very similar to natural mode

where the wind speed will change every few

seconds.

SETTINGS

Tap Settings to see additional functionality.

HORIZONTAL SWITCH

Tap the Horizontal Switch button to turn on

oscillation. Tap again to turn off.

Fan Off Fan On

Operating your Fan from the APP

COUNTDOWN

This fan comes with a countdown/ auto off timer.

When the fan is ON you can set it to turn OFF after a number of hours (0.5-7.5 hours) has elapsed.

Tap the countdown button and scroll to select the number of hours before the fan will turn OFF and

tap OK to return to the fan operation interface.

To cancel the timer, tap the countdown button again and tap cancel.

LED Display

You can turn the control panel LED Display to

sleep via the app.

Tap the lightbulb icon to turn off the LED Display

and the fan display will shut down but the fan

will still operate normally. Tap the lightbulb again

to show the display.

Set up Tap-To-Run & Create Smart Scenes

Store your favourite settings or set up automated

functions based on conditions in the ‘Smart’ part

of your Goldair app.

Warning- you must remember to turn off any

Smart functions prior to leaving the house or

going away. We recommend you only operate

your Goldair devices when someone is on the

premises.

•Tap ‘Smart’ on the bottom of your mobile phone.

•Tap ‘Create Scene’ or the ‘+’ icon on the top

right.

Click ‘Launch Tap-to-Run’ to save your preferred settings

on your devices to launch at the click of a button. Click

‘Run the device’ and choose a device. Preset your desired

functions such as Power ON/OFF, temperature, mode and

timer as per on the device’s functions. Click ‘Next’

Review your conditions and tasks on this screen, or

choose to add another device or task by clicking the ‘+’

icon.

Click Save to store your settings and your new task will

appear on the Smart homepage. Click it to operate your

desired task.

Set up Tap-To-Run & Create Smart Scenes

As well as setting up automated Tap-to-Run

tasks, you can set conditions to operate your

devices.

Weather:

Click ‘When weather changes’ to create a task based on your local outside weather.

Choose between temperature, humidity, weather type, sunset/sunrise or wind speed.

Select your desired condition and click ‘Next’. Click ‘Run the device’ and choose a device.

Preset your desired functions such as Power ON/OFF, temperature, mode and timer as

per on the device’s functions. Click ‘Next’. Review your conditions and click save. Your

automation will appear on the main Smart homepage.

Schedule:

Click ‘Schedule’ to create a task for your device at selected times of the day. Click ‘Repeat’

to choose days of the week or leave as ‘Once’ to operate as a one off. Choose your

desired time from the scroll bar and click ‘Next’. Click ‘Run the device’ and choose a

device. Preset your desired functions such as Power ON/OFF, temperature, mode and

timer as per on the device’s functions. Click ‘Next’. Review your conditions and click save.

Your automation will appear on the main Smart homepage.

Status Change

Click ‘When device status changes’ to create a condition based on any function on your

device, for example turning the Power Off when any device function is changed (to act as

a child lock)

Voice Control

Once your smart scenes are set up, you can use Amazon Alexa or Google Home Routines

to operate the scenes via voice control. Refer to your Amazon or Google Home user

guides for instructions on how to pair your routine to smart scenes.

Inhaltsverzeichnis

Andere Goldair Lüfter Handbücher

Goldair

Goldair Platinum Series Bedienungsanleitung

Goldair

Goldair GCAC310 Bedienungsanleitung

Goldair

Goldair GCTF75 Bedienungsanleitung

Goldair

Goldair GCDF220B Bedienungsanleitung

Goldair

Goldair GCDF051 Bedienungsanleitung

Goldair

Goldair PLATINUM GAS60 Bedienungsanleitung

Goldair

Goldair PLATINUM GAS50 Bedienungsanleitung

Goldair

Goldair Platinum GPTF370 Bedienungsanleitung

Goldair

Goldair GCMF100 Bedienungsanleitung

Goldair

Goldair GCHV220 Bedienungsanleitung

Goldair

Goldair GCPF230 Bedienungsanleitung

Goldair

Goldair GCTF180 Bedienungsanleitung

Goldair

Goldair GCHV200 Bedienungsanleitung

Goldair

Goldair GCDF145 Bedienungsanleitung

Goldair

Goldair GCPF120 Bedienungsanleitung

Goldair

Goldair PLATINUM GPPF220 Bedienungsanleitung

Goldair

Goldair PLATINUM GPTF470 Bedienungsanleitung

Goldair

Goldair GCPF401DR Bedienungsanleitung

Goldair

Goldair Venti GCPF110 Bedienungsanleitung

Goldair

Goldair Platinum GPTF380 Bedienungsanleitung

Goldair

Goldair GCPF130 Bedienungsanleitung

Goldair

Goldair GCTF350 Bedienungsanleitung

Goldair

Goldair GCBF30 Bedienungsanleitung

Goldair

Goldair GCDBF40DC Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung