Goldair Platinum GPTF390 Bedienungsanleitung

117cm Tower Fan with WiFi

Operating Instructions

Model: GPTF390

WiFi –Downloading and Setting up APP

This APP is supported only on 2.4GHz Wi-Fi channels.

The Goldair app and device pairing process require your 2.4ghz connection to

be separated from your 5ghz connection. For instructions on how to do this

please contact your internet provider.

•Tap REGISTER near the bottom of the screen.

•Read and agree to the Privacy Policy.

•Add your email address.

•Tap 'Obtain verification code'

You will then receive an email with a verification

code.

Download Goldair mobile APP

•Open the APP Store or Google Play on your mobile phone.

•Open 'Search' and enter 'Goldair'

•Click 'GET' and begin to download and install.

Once downloaded to your phone open the APP

•Enter the verification code from your email.

•Create a password.

•Then tap confirm.

If you haven't received a verification code via

email, tap the resend button and when the

verification code is received follow above steps.

Your APP is now registered and ready for pairing

to your device.

Pairing APP to Device

Connect with 2.4ghz Wifi Network

On the Home screen,

tap ‘Add Device’ or

the ‘+’ icon.

Using the categories on

the left, navigate to

your device and tap on

the image.

Confirm you are connected

to a 2.4ghz network. If your

2.4ghz and 5ghz networks

are dual banded, click

‘Common router setting

method’ on how to split, or

contact your internet

provider.

Pairing APP to Device

Connect with 2.4ghz Wifi Network: EZ Mode

The app will default to EZ Mode in the

right hand corner.

Ensure your device’s Wifi LED is flashing

rapidly.

If it is not, hold down the

‘OSCILLATION’button for 5 seconds or

until the Wifi icon begins to flash.

Click ‘Confirm indicator rapidly blink’

and ‘Next’

See instructions below to finalise your device pairing via EZ mode.

Your device will now pair with the app.

Please ensure your device, modem and

phone are as close together as possible

and that your 2.4ghz Wifi signal is strong.

Once the device has paired, choose

to rename it by tapping the Pen icon

Choose the most suitable room type and

click ‘Done’ in the top right hand corner.

Pairing APP to Device

Change ‘EZ Mode’ to ‘AP Mode’ by

clicking in the top right hand corner

Ensure your device’s Wifi LED is

flashing slowly.

If it is not, hold down the

‘OSCILLATION’button for 5 seconds

or until the Wifi icon begins to

flash.

Click ‘Confirm indicator slowly

blink’ and ‘Next’

Click ‘Go Connect’ to

connect to the device’s

Hotspot by selecting the

network highlighted on the

screen in your app, e.g.

‘SmartLife- XXXX’

Select the device’s Hotspot

network and you will be returned

to the app. If not, navigate back to

the Goldair app.

Note- if you get a notification

saying ‘Internet may not be

available’ press Dismiss.

Your device will now pair

with the app.

Please ensure your

device, modem and

phone are as close

together as possible.

Connect with 2.4ghz Wifi Network: AP Mode

See instructions below to finalise your device pairing via AP Mode.

Once the device has paired,

choose to rename it by

tapping the Pen icon

Choose the most suitable

room type and click ‘Done’

in the top right hand

corner.

Operating your Device from the APP

POWER

Open the “GOLDAIR" APP to select the fan (when

using one mobile phone to control multiple fans,

you need to select the fan to be operated).

•Select the fan to be operated and enter the

operation interface.

•Tap the Power/Switch icon down the bottom

and the fan will turn on.

The graphic will now start spinning.

•You can now control the fan.

•To turn the fan off again tap the Power/Switch

icon.

Fan OnFan Off

MODE

There are 4 modes the fan can go into. To select

the mode press the Mode icon.

NORMAL –this is the standard and default mode

of the fan. 3 Speed settings

NATURAL –this mode attempts to mimic the

outdoor natural wind type of by constantly

changing the

wind speed.

SLEEP –this mode is very similar to natural mode

where the wind speed will change every few

seconds.

CHILD –Fan will run for 3 hours before turning

off. Fan will work in a cycle of high speed to

medium to low speed, all for about 15 minutes.

Oscillation will active.

Operating your Device from the APP

OSCILLATION (OSC)

To select the oscillation mode on the app, hold

your finger on the icon for 2-3 seconds and

release.

To exit oscillation mode, follow the same process.

SPEED SETTINGS

To select the three different speed settings,

adjust the bar on the bottom of the app.

In the default mode of Normal you can select

speed settings from 1-3 (1) quiet and low

speed,

(3) high speed.

Tap the speed setting that feels the most

comfortable to you. Speed 1 Speed 2 Speed 3

TIMER

To set the timer, press the settings button in

the lower right corner and then press

countdown timer.

When the fan is ON you can set it to turn OFF

after a number of hours (1-12 hours) has

elapsed.

To cancel the timer, touch the timer button

again and tap cancel.

Set up Tap-To-Run & Create Smart Scenes

Store your favourite settings or set up automated

functions based on conditions in the ‘Smart’ part

of your Goldair app.

Warning- you must remember to turn off any

Smart functions prior to leaving the house or

going away. We recommend you only operate

your Goldair devices when someone is on the

premises.

•Tap ‘Smart’ on the bottom of your mobile phone.

•Tap ‘Create Scene’ or the ‘+’ icon on the top

right.

Click ‘Launch Tap-to-Run’ to save your preferred settings

on your devices to launch at the click of a button. Click

‘Run the device’ and choose a device. Preset your desired

functions such as Power ON/OFF, temperature, mode and

timer as per on the device’s functions. Click ‘Next’

Review your conditions and tasks on this screen, or

choose to add another device or task by clicking the ‘+’

icon.

Click Save to store your settings and your new task will

appear on the Smart homepage. Click it to operate your

desired task.

Set up Tap-To-Run & Create Smart Scenes

As well as setting up automated Tap-to-Run

tasks, you can set conditions to operate your

devices.

Weather:

Click ‘When weather changes’ to create a task based on your local outside weather.

Choose between temperature, humidity, weather type, sunset/sunrise or wind speed.

Select your desired condition and click ‘Next’. Click ‘Run the device’ and choose a device.

Preset your desired functions such as Power ON/OFF, temperature, mode and timer as

per on the device’s functions. Click ‘Next’. Review your conditions and click save. Your

automation will appear on the main Smart homepage.

Schedule:

Click ‘Schedule’ to create a task for your device at selected times of the day. Click ‘Repeat’

to choose days of the week or leave as ‘Once’ to operate as a one off. Choose your

desired time from the scroll bar and click ‘Next’. Click ‘Run the device’ and choose a

device. Preset your desired functions such as Power ON/OFF, temperature, mode and

timer as per on the device’s functions. Click ‘Next’. Review your conditions and click save.

Your automation will appear on the main Smart homepage.

Status Change

Click ‘When device status changes’ to create a condition based on any function on your

device, for example turning the Power Off when any device function is changed (to act as

a child lock)

Voice Control

Once your smart scenes are set up, you can use Amazon Alexa or Google Home Routines

to operate the scenes via voice control. Refer to your Amazon or Google Home user

guides for instructions on how to pair your routine to smart scenes.

View compatible Voice

Control devices &

instructions on setting up.

Operating your Device from the APP

Change the name,

location & image of

your device

View your device

information

Device settings:

Turn on

notifications for

when device goes

Offline.

Share device with family

(see instructions on next

page)

Read FAQs & submit

feedback

Remove device from app

View your tap-to-

run and smart

scene automations

Create group of

devices (see

instructions on next

page)

Review device

network

Add device shortcut

to home screen

View device updates

& turn on automatic

updates

Andere Handbücher für Platinum GPTF390

Andere Goldair Lüfter Handbücher

Goldair

Goldair GCPTF100 Bedienungsanleitung

Goldair

Goldair GCAT400 Bedienungsanleitung

Goldair

Goldair GDF120B Bedienungsanleitung

Goldair

Goldair GCTF700 Bedienungsanleitung

Goldair

Goldair GTF010 Bedienungsanleitung

Goldair

Goldair GCHV220 Bedienungsanleitung

Goldair

Goldair GSTF180 Bedienungsanleitung

Goldair

Goldair GCBF100 Bedienungsanleitung

Goldair

Goldair GDF90B Bedienungsanleitung

Goldair

Goldair Platinum Series Bedienungsanleitung

Goldair

Goldair GCTF110 Bedienungsanleitung

Goldair

Goldair GCPHF15 Bedienungsanleitung

Goldair

Goldair GCTF360 Bedienungsanleitung

Goldair

Goldair GEXSL100 Bedienungsanleitung

Goldair

Goldair GCMF220 Bedienungsanleitung

Goldair

Goldair GCPF160 Bedienungsanleitung

Goldair

Goldair GCHV200 Bedienungsanleitung

Goldair

Goldair PLATINUM GAS60 Bedienungsanleitung

Goldair

Goldair GCHV150 Bedienungsanleitung

Goldair

Goldair GCDF135 Bedienungsanleitung

Goldair

Goldair GCPF340B Bedienungsanleitung

Goldair

Goldair GCAC310 Bedienungsanleitung

Goldair

Goldair GCPF340 Bedienungsanleitung

Goldair

Goldair GCBF150 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung