Goldmund EIDOS 36A Bedienungsanleitung
USER MANUAL
GOLDMUND EIDOS 36A
CD/SACD Player
2
Table of Contents
1. FEATURES AND COMPATIBILITY 5
2. UNPACKING 5
3. POWER SUPPLY VOLTAGE SELECTION 6
4. CHOICE OF THE PLAYER LOCATION 6
5. POWER CONNECTION 7
6. BACK PANEL CABLE CONNECTIONS 7
7. KEYBOARD CONTROLS 8
8. REMOTE CONTROL FUNCTIONS 11
9. SWITCHING ON 11
10. CLEANING 13
11. MAINTENANCE 13
3
W A R N I N G!
This high quality universal player possesses
technical features which are necessary for
accurate tracking of today's best CDs, Audio
DVDs and SACDs.
Only careful use can provide all the satisfaction
you are expecting.
All handling must be performed according to the
following instructions to avoid to damaging the
player. Nevertheless, if the instructions are
followed in detail, you will notice that using the
GOLDMUND EIDOS 36A Player is quite simple
and convenient.
WARNING!: PLEASE DO NOT CONNECT
ANY WIRES OR MOVE ANY PARTS BEFORE
READING THE FOLLOWING INSTRUCTIONS.
4
1 FEATURES AND COMPATIBILITY
Compatibility
Please note that the Goldmund Eidos 36A is compatible with the following formats:
-Audio CD 12 and 8 cm size, single-sided.
-CD-R/RW
-DVD – Audio
-SACD
-MP3 CD
Associated Equipment
For technicians, musicians, or users who demands the very best in sound transcription, you
may decide the use of one of our separate D/A converters, such as the Goldmund Mimesis
20M. The D/A converters built into the Eidos 36A, however, are a very high quality standard
and are provided for use in most systems and especially for formats requesting them such
as SACD.
5
2 UNPACKING
You will find in the packaging (see note):
- The Player itself,
- The power cord,
- The remote control and 2 x AA batteries,
- This user manual.
NB: If you need to return the player to the factory or to your local representative for a
warranty repair, please note that it must be repackaged in the original packing. This
packaging has been designed specifically to protect the Eidos 36A in transit. Use of
alternative packaging is likely to result in damage, invalidating warranty.
3 POWER SUPPLY VOLTAGE SELECTION
The power supply of your unit has been adjusted to operate with the AC voltage of your
area. Check on the back panel of the unit if in any doubt. If you move after purchasing the
Universal player to an area using different mains voltage, do not forget to switch the back
panel selector to the new voltage of your area. The unit can operate at 50 or 60 Hz mains.
6
4 CHOICE OF THE PLAYER LOCATION
Due to the specific quality of its Goldmund "Mechanical Grounding" construction, the
Goldmund Eidos 36A Player is less critical than other designs in placement selection.
Feedback is mostly so low that no special precaution is required. Nevertheless, position the
player as far as you can from the speakers if you want to totally avoid the air coupling
between the speakers and the player.
Locate the Player to provide the most rigid possible connection to the building construction.
Solid coupling is essential and the support used (Rack, Table, Shelf) must be as rigid and
solid as possible.
5 POWER CONNECTION
Plug the AC power cord to the back of the Eidos 36A and in a wall socket. Switch the back
power switch to ON. The front display will light up as soon as you press any key or when
pressing the remote control STANDBY button, meaning the unit is now powered on.
7
6 BACK PANEL CABLE CONNECTIONS
Audio Connections
The Eidos 36A is equipped with the following stereo output connectors to connect your
player to a D/A converter or digital preamplifier:
o 75 Ohms RCA coaxial SPDIF connector.
o TOSLINK optical cable output.
Goldmund recommends that the greatest care is taken when selecting the cable linking the
player to the D/A converter or digital preamplifier. The very accurate signal provided by the
Eidos 36A can easily be ruined by an imperfect connection. Use a "Goldmund Lineal™"
cable from the coaxial output if you want to achieve the most accurate jitter-free connection
for CD playback.
Additionally, there are the following Analog Audio Outputs:
o 2 x RCA (Left/Right) coaxial stereo analogue outputs.
o 6 x RCA 6 channel coaxial analogue outputs (needed for multi-channel DVD-Audio
and SACD connection).
8
7 KEYBOARD CONTROLS
Keyboard Keys
- << : Press to go back to previous chapters/tracks. Press and hold to perform
reverse playback scanning.
- STOP : Press to stop playback. Pressing twice causes the disc to return to the
beginning of the disc if playback starts again.
- >> : Press to advance to chapters/tracks. Press and hold to perform fast-forward
scanning.
- SACD : Use to select stereo audio (2CH AREA), multi-channel audio (MULTI-CH
AREA) and for hybrid CDs standard CD audio area (CD AREA).
- STOP : Press to stop playback. Pressing twice causes the disc to return to the
beginning of the disc if playback starts again.
- PAUSE : Key used for the pause function. When the "Pause" function is switched off
by pressing the "Start" key, the selection will start back at the exact location
where it was interrupted.
- PLAY : This key is used to start or resume Playback. It also cancels the "Pause"
function.
- OPEN : this button opens the tray to load the disc. The same button closes the tray
when it is open. When loading a disc, place discs in the disc tray with the
label side facing up.
These functions, accessible from the keyboard can also be achieved by the remote-control
transmitter (see below for all Remote Control functions)
9
Front Panel Display
1 5.1CH
Lights when analog 5.1 channel output is selected (see below)
2 V-PART
Lights when playing a video part of a DVD disc
3 (camera)
Lights during multi-angle scenes on a DVD disc (see below)
4 GUI (Graphical User Interface)
Lights when a menu is displayed on-screen
5 GRP
Indicates that the character display is showing a DVD-Audio group number
6 TITLE
Indicates that the character display is showing a DVD-Video title number
7 (●)
Lights when Dolby V/TruSurround is active (see below)
10
8 TRK
Indicates that the character display is showing a track number
9 CHP
Indicates that the character display is showing a DVD chapter number
10 REMAIN
Lights when the character display is showing the time or number of tracks/titles/chapters
remaining
11 Character display
12 Pause
Lights when a disc is paused
13 Play
Lights when a disc is playing
14 DolbyDigital
Lights when a Dolby Digital soundtrack is playing
15 DTS
Lights when a DTS soundtrack is playing
Inhaltsverzeichnis
Andere Goldmund CD-Player Handbücher
