3 | P a g e V e r s i o n 1 . 1 –10/26/2023
STEP 2: Install Shelf Between 2 Donuts, Install Wet/Dry Coupon Holder, and attach Whiteboard
1. Attach a Weld Stand Donut (Part A) to the top of the 36” Weld Stand Pole (Part C) and tighten the (3) 1/4'-20 X 1/4"
Set Screws (Part G). Set the Side Shelf (Part L) on top of the Weld stand Donut and line up the holes and then top
with the final Weld Stand Donut. Secure the 2 Donuts between the Shelf using (4) 1/4-20 X 1/1/2” –screws (Part D).
2. Install the Wet/Dry Coupon Holder (Part M) on the shelf using the (2) 1/4-20 X 3/4 Hex Bolts (Part E)
3. Install the Dry Erase Board (Part M) on the provided Hooks
STEP 3: Attach Top Upright (47” Long Pole) and Arm assembly for Coupon Holder
1. Install 47” Vertical Pole (Part C) and tighten the (3) 1/4'-20 X 1/4" Set Screws (Part G).
2. Slide the Coupon Holder Arm down the Vertical Pole and secure at the desired height using (4) –¼ - 20 X 3/4” Wing
Head Screw, (Part I) Tighten using the included T-Handle Tool (Part K)
