Graco 24V528 Bedienungsanleitung

3A4404D

Instructions

4 Channel Upgrade Kit for

InvisiPac™Hot Melt Delivery Systems

For upgrading a 2 channel system toa4channelsystem.Forprofessional use only.

Not approved for use in explosive atmospheres or hazardous locations.

4 Channel Upgrade Kit 24V528

Important Safety Instructions

Read all warnings and instructions in this manual and

in the InvisiPac Hot Melt Delivery System manual.

Save all instructions.

4 Channel Upgrade Kit, 24V528

23A4404D

4 Channel Upgrade Kit, 24V528

Use this kit to upgrade a 2 channel system to a 4 channel system.

WLD

1301

1302

1306

1304

1305

1307

1308

Ref Part Description Qty

1301 24V510 MODULE, GCA, MZLP 1

1302 16T087 CABLE, jumper, male/male, 21 in. 1

1303 127424 HARNESS, 2nd MZLP power 1

1304 112190 STRAP, wrist, grounding 1

1305 16T440 CAP, jam nut, sealing 2

1306 24R324 SOFTWARE UPGRADE TOKEN,

InvisiPac System

1307 24P615 FITTING, adapter 2

1308 16Y781 LABEL, InvisiPac Channel Numbers 1

116793 FITTING, 90° elbow (not shown) 2

126961 FITTING, 45° elbow (not shown) 2

4 Channel Upgrade Kit Installation

3A4404D 3

4 Channel Upgrade Kit Installation

1. Perform the Pressure Relief Procedure (see the

InvisiPac manual).

2. Place grounding wrist strap (1304) over your wrist

and secure other end to a grounded surface.

3. Set the MZLP (1301) rotary switch to “2”.

4. Remove screws (BB) then remove plate (AA) from

system.

5. Use screws (BB) to install MZLP (1301) onto sys-

tem. Apply labels from label sheet (1308) to MZLP

#2. Place the “3” and “4” labels as shown in parts

illustration.

NOTE: The new MZLP (1301) with be referred to as

MZLP 2, and the original MZLP that came with the sys-

tem will be referred to as MZLP 1 from here on.

6. Remove electrical enclosure front access door.

NOTE: Do not force the electrical connection. Minimal

force is required to seat the connector. If resistance is

felt, stop and verify the connector orientation. Verify the

connector has “Locked” by gently pulling on the white

connector housing.

7. Connect CAN jumper cable (1302) to MZLP 1 con-

nector J3 and connect other end of jumper

cable (1302) to MZLP 2 connector J6.

8. Connect power harness (1303) to MZLP 2 connec-

tor J2.

9. Remove plugs (CC) from fluid manifold and replace

with straight fittings (1307) or the extra fittings

included with the InvisiPac system. Use the fittings

that meet your hose routing needs.

10. To ensure your InvisiPac system has the latest soft-

ware, insert token (1306) into the ADM. Follow the

Software Update Procedure in the InvisiPac man-

ual.

The equipment must be grounded. Improper ground-

ing, setup, or usage of the system can cause electric

shock. Disconnect the plug from the power outlet or

turn off the circuit breaker for incoming power.

Equipment surfaces and fluid that is heated can

become very hot during operation. To avoid severe

burns, do not touch hot fluid or equipment.

MZLP 1

MZLP 2

Step 7: Install Jumper Cable (1302).

All written and visual data contained in this document reflects the latest product information available at the time of publication.

Graco reserves the right to make changes at any time without notice.

2ULJLQDOLQVWUXFWLRQV This manual contains English. MM 3A4404

Graco Headquarters: Minneapolis

International Offices: Belgium, China, Japan, Korea

GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA

www.graco.com

Revision D,September 2019

Graco Information

Sealant and Adhesive Dispensing Equipment

For the latest information about Graco products, visit www.graco.com.

For patent information, see www.graco.com/patents.

TO PLACE AN ORDER, contact your Graco distributor, go to www.graco.com, or call to identify the nearest

distributor.

If calling from the USA: 1-800-746-1334

If calling from outside the USA: 0-1-330-966-3000

Inhaltsverzeichnis

Andere Graco Industrieanlagen Handbücher

Graco

Graco 236-931 Bedienungsanleitung

Graco

Graco D60 Bedienungsanleitung

Graco

Graco 241619 Bedienungsanleitung

Graco

Graco 24A431 Bedienungsanleitung

Graco

Graco XP 26C051 Stücklistenhandbuch

Graco

Graco ExactaBlend 24R200 Bedienungsanleitung

Graco

Graco TI12552a Bedienungsanleitung

Graco

Graco 25C483 Bedienungsanleitung

Graco

Graco EcoQuip EQ200T Gebrauchs- und Pflegehandbuch

Graco

Graco 253479 Bedienungsanleitung

Graco

Graco 17B190 Bedienungsanleitung

Graco

Graco PR70 Series Bedienungsanleitung

Graco

Graco REACTOR E-30 with 15.3KW of heat Bedienungsanleitung

Graco

Graco SERIES J Bedienungsanleitung

Graco

Graco Reactor 2 E-30 Bedienungsanleitung

Graco

Graco Sharpe 7004 Stücklistenhandbuch

Graco

Graco ThermoLazer 200TC Betriebsanleitung

Graco

Graco LineLazer 3900 Bedienungsanleitung

Graco

Graco SuperCat 232721 Bedienungsanleitung

Graco

Graco 244632 Bedienungsanleitung

Graco

Graco ProMix PD3K Plus Bedienungsanleitung

Graco

Graco President 241265 Bedienungsanleitung

Graco

Graco Fire-Ball 222073 Bedienungsanleitung

Graco

Graco AutoClean2 Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung