Graco 25M713 Bedienungsanleitung

For use on RoadPak™Line Striping Systems to lift the gun arm during spray operations.

Model 25M713

Important Safety Instructions

Read all warnings and instructions in this manual and in related manuals.

Be familiar with the controls and the proper usage of the equipment.

Save these instructions.

Related Manuals:

3A5384 Operation

3A5405B

Instructions

Winch Kit for RoadLazer™RoadPak™

RoadPak HD™Line Striping System

Installation

23A5405B

Installation

1. Assemble adapter bracket (1) to height adjustment

bracket on both sides. Fasten with bolts (6),

washers (7), and nuts (8). Torque to 28 ft-lb.

2. Use four bolts and lock washers (supplied) to

assemble winch (5) onto winch arm (2).

3. Use bolts, washers, and nuts (supplied) to

assemble cable guide onto winch arm bracket (3).

4. Slide winch arm bracket (3) into winch arm (2) and

secure into place by tightening extension clamp (15)

and inserting the safety pin.

Installation

3A5405B 3

5. Insert winch assembly into one of the adapter brack-

ets (1) and secure with pin (9).

6. Slide terminal boots (supplied) onto both ends of the

blue and yellow cables (25). Connect each cable to

the corresponding color-coded terminal on the

winch. Cover terminal with terminal boot.

7. Install split sleeving (26) over cables (25) and cut to

needed length.

8. Connect blue and yellow cables (25) from the winch

terminals to the blue and yellow color-coded termi-

nals on the winch switch terminal. Cover terminal

with terminal boot. See Wiring Diagram, page 4.

NOTE: If the winch runs in the opposite direction as indi-

cated on the control, swap the positions of the yellow

ans blue wire connections on the winch.

9. Plug in winch controller (19) to the connector at the

junction box. Properly protect and secure all wires to

keep from damaging them during every day use.

Wiring Diagram

43A5405B

10. Adjust the winch arm (3) so it is in line with the lifting

point on the gun arm. Ensure the winch arm is

secured by pinning it and tightening the extension

clamp (15).

11. Use the buttons on the controller (19) to lower the

winch. Connect the winch hook (22) to the lifting

point on the gun arm.

12. When transporting the RoadPak system, the gun

arm must be properly stowed (see manual 3A5384)

and the winch arm must be adjusted to fit within the

width of the vehicle.

Wiring Diagram

Parts List

3A5405B 5

Parts List

Ref. Part Description Qty.

1 16G688 BRACKET, adapter, winch, painted 2

2 24G839 ARM, winch, painted 1

3 24G841 BRACKET, arm, winch, painted 1

5 25M738 WINCH, RoadLazer 1

6 101147 SCREW, cap, hex HD 4

7 109570 WASHER, plain 8

8 801020 NUT, lock, hex 4

9 115473 PIN, hitch 2

10 186812 CHAIN, ground 3.5 HP 2

11 M71635 CLAMP, hose 2

12 100678 SCREW, cap hex HD 1

13 111040 NUT, lock, insert, nylock, 5/16 1

14 100023 WASHER, flat 6

15 238813 CLAMP, extension 1

19* 17U973 SWITCH, corded remote 1

22* 16H068 CARBINER, 1-3/8 in. eye dia. 1

23* 17U972 CABLE, 5/16 in. dia., black 1

25* 17U974 WIRE, assembly, winch 1

26 17X001 SLEEVING, split, 20 ft. 1

* Included in 25M738.

Ref. Part Description Qty.

All written and visual data contained in this document reflects the latest product information available at the time of publication.

Graco reserves the right to make changes at any time without notice.

For patent information, see www.graco.com/patents

Original instructions. This manual contains English. MM 3A5405

Graco Headquarters: Minneapolis

International Offices: Belgium, China, Japan, Korea

GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA

www.graco.com

Revision B, March 2018

Inhaltsverzeichnis

Andere Graco Industrieanlagen Handbücher

Graco

Graco C Series Bedienungsanleitung

Graco

Graco RTX 1500 Bedienungsanleitung

Graco

Graco 25C528 Stücklistenhandbuch

Graco

Graco Reactor E-30i Gebrauchs- und Pflegehandbuch

Graco

Graco Pulse 25T462 Bedienungsanleitung

Graco

Graco Reactor A Series Bedienungsanleitung

Graco

Graco Xtreme L085C1 Gebrauchs- und Pflegehandbuch

Graco

Graco XP 26C051 Stücklistenhandbuch

Graco

Graco UniDrum C59784 Datenblatt

Graco

Graco Gusmer Reactor H-25 Bedienungsanleitung

Graco

Graco 26B772 Bedienungsanleitung

Graco

Graco SaniForce SDU Series Bedienungsanleitung

Graco

Graco HFRL Bedienungsanleitung

Graco

Graco Compact Twin Flow Bedienungsanleitung

Graco

Graco 241619 Bedienungsanleitung

Graco

Graco 24H853 Einrichtungshandbuch

Graco

Graco XM PFP 273231 Gebrauchs- und Pflegehandbuch

Graco

Graco SaniForce STU Bedienungsanleitung

Graco

Graco Series B Bedienungsanleitung

Graco

Graco Hydra-Cat TI5556b Gebrauchs- und Pflegehandbuch

Graco

Graco PrecisionFlo LT Bedienungsanleitung

Graco

Graco CycleFlo II Bedienungsanleitung

Graco

Graco HydroShield WABH00 Stücklistenhandbuch

Graco

Graco Twistork 235534 Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung