grado GW100 Bedienungsanleitung
GW100
Owner’s Guide
Volume Up / Action
Volume Down / Action
Line-In
Charging Light
Power / Action
Charging Port
Mic
Overview
Blue: Fully Charged
Blue: Powered On
Red: Charging
Red: Low Battery
Long Press: Power On / Off
Battery Saver: If unpaired for 10 minutes,
GW100 will power off.
Charging: Plug the Micro USB cable into the
charging port and connect the other end
to a compatible USB port of a computer
or wall charger.
Power
Long Press: From the off state press and hold until
charging light flashes blue and red.
On your device, navigate to settings
and turn on Bluetooth.
After a few seconds, you will see
“Grado GW100”. Tap to pair.
When the paired device’s Bluetooth is
turned off or out of range, the GW100
can connect to a second device.
Blue & Red: Ready to Pair
Connect
Short Press: Increase Volume
Long Press: Next Song
Short Press: Decrease Volume
Long Press: Previous Song
Short Press: Play / Pause
Volume / Music
Short Press: Increase Volume
Short Press: Decrease Volume
Double Press: Voice Assistant
Short Press: Answer / Hang Up
Long Press: Reject Call
Phone / Voice
Working Distance: 10m
Bluetooth Version: 4.2 with apt-X
Battery Life: 15 hours*
Charging Time: 2 hours
Frequency Response: 20Hz~20KHz
Mic Sensitivity: 42dB +/- 3dB
Battery Capacity: 320mAH
Methods of pairing to Bluetooth may vary depending on the specific
device. Please refer to the device’s manual for further details.
*Battery life will vary depending on the listening volume and genre of
music played.
Specifications
Inhaltsverzeichnis
Andere grado Kopfhörer Handbücher
