Grandstream Networks GXP2160 Bedienungsanleitung

http://www.elastix.org

Grandstream GXP2160

and Elastix Server

Setup Guide

PaloSanto Solutions

Grandstream GXP2160 Server Setup Guide

1.0 Setup Diagram

Figure 1-1 is a setup diagram for a single IP phone Grandstream GXP2160 configuration.

The phone is setup as a SIP telephony device.

Figure 1-1. Setup Diagram

2.0 Host PC Environment

Table 2-1. Host Server Environment Details

Description

Hardware Type

Elastix Appliance ELX-Series

Hardware Version

ELX-5000

Software Type

Elastix

Software Version

2.4

3.0 Test Setup Equipment

Table 3-1. Test Setup Equipment

Equipment

Model

Version

IP (SIP) Phone

N/A

Grandstream

GXP2160

1.0.0.17

Switch

N/A

PaloSanto Solutions

Grandstream GXP2160 Server Setup Guide

4.0 Setup Procedure

To set up the Elastix Server for the Grandstream GXP2160

1. Go to the web address of the Elastix Server Login page. The web address is

determined by the customer, for this guide we have used the IP address 192.168.5.186

2. On the Login page, type the username and password for an administrative user into

the Username and Password fields, see Figure 4-1. The username and password are

determined by the customer.

Figure 4-1. Login

3. Press Enter or click on the Submit button to go to Elastix’s Dashboard

4. Once inside, click on the PBX tab on the menu at the top of the screen

PaloSanto Solutions

Grandstream GXP2160 Server Setup Guide

Figure 4-2. Dashboard

5. Click on the Submit button to add an extension, see Figure 4-3. This will take you to

the Add SIP Extension page.

Figure 4-3. Add an Extension

6. On the Add SIP Extension page (Figure 4-4), fill in the following information:

• User Extension (100 in this example)

• Display Name (‘GrandstreamGXP2160’in this example)

• secret (‘h7Dka3Rf9si0t’in this example)

PaloSanto Solutions

Grandstream GXP2160 Server Setup Guide

Figure 4-4. Add SIP Extension

7. Click on “Submit” button at the end of the page, and you will see a similar page on

Figure 4-5 displaying the “Apply Configuration Changes Here” pink ribbon on top of

the screen. Click on there to apply changes.

Figure 4-5

8. With this you have just finished creating a SIP extension that will be used by the

Grandstream GXP2160 to register with the Elastix Server. Repeat Steps 5 through 7 to

similarly create another extension (different values on Step 6) to be used by the IP (SIP)

Phone to register as well (extension 101 in this example). Once you finished you will

see something similar to Figure 4-6.

PaloSanto Solutions

Grandstream GXP2160 Server Setup Guide

Figure 4-6

9. You will need to enter the information from the extension created on the Elastix

Server into the Grandstream Phone.

For the initial configuration, refer to the Grandstream GXP2160 User Manual found at:

http://www.grandstream.com/index.php/products/ip-voice-telephony/enterprise-ip-

phones/gxp2160

Factory default settings

IP Addressing

DHCP

Web Access Username

admin

Web Access Password

admin

10. Log in to the Grandstream GXP2160 WebUI by pointing your browser to the

Grandstream Phone’s IP address.

11. When prompted, enter the Web Access Password to accesss to the WebUI (Figure 4-

7).

Figure 4-7 Grandstream WebUI

To register the Grandstream GXP2160 Phone we have two methods: Manual

Configuration and Autoprovisioning using Elastix’s Endpoint Configurator.

PaloSanto Solutions

Grandstream GXP2160 Server Setup Guide

MANUAL CONFIGURATION

1. Use the information from the Add SIP Extension page (Figure 4-4) to enter the

following necessary information on “Account => Account 1” section of the

Grandstream Phone WebUI (Figure 4-8):

Account Active: Yes

Account Name: GrandstreamUser

SIP Server: Elastix Server’s IP Address (192.168.5.186 in this example)

SIP User ID: 100

Authenticate ID: 100

Authenticate Password: (‘h7Dka3Rf9si0t’ in this example)

Figure 4-8. Account

2. Once you have entered the required information, click on ‘Save and Apply’ button

located at the end of the page.

3. To check the correct registration of the phone, go to “Status” section. You should see

your phone registered (Figure 4-9). If the phone is not registered, make sure you’ve

entered the correct information.

PaloSanto Solutions

Grandstream GXP2160 Server Setup Guide

Figure 4-9. Status

3. Configure the other IP (SIP) Phone with the correct parameters.

4. To test the Grandstream GXP2160, pick up the previously configured IP (SIP) Phone

and call the GXP2160’s extension number (101 in this example). When the call is

established, speak into the phone and verify that the other IP (SIP) Phone can hear your

voice. Check this by calling from both ends.

This step completes the manual procedure.

PaloSanto Solutions

Grandstream GXP2160 Server Setup Guide

AUTOPROVISIONING USING ELASTIX’S ENDPOINT

CONFIGURATOR

Note: Endpoint Configurator support available starting Elastix 2.5 RC

1. After installation, in the Elastix Web Interface go to “PBX => Batch Configurations

=> Endpoint Configurator”. See figure 4-10

Figure 4-10. Endpoint Configurator

2. Type the network address where the phone is located and click on the magnifying

glass. This will generate a list with all the phones available in that network. See

figure 4-11.

Figure 4-11. List of endpoints

3. In the row where the phone you want to autoprovision is located (find it according

to either its MAC or IP Address):

Mark the checkbox

From the drop-down list, select the correct Phone Model if it is not detected

automatically

Click on the link “[Configure x.x.x.x]” to set the parameters to configure the

phone.

4. After clicking in the configuration link, you will see a window with many tabs

according to what you want to configure. In this case we will configure a SIP

account. Go to the tab “Accounts” and drag the accounts you want to assign from

PaloSanto Solutions

Grandstream GXP2160 Server Setup Guide

left to right. Then click on Apply button. See figure 4-12.

Figure 4-12. Accounts configuration

5. After configuring you will see that the status field of the phone has changed. See

figure 4-13

Figure 4-13. List of endpoints

6. Now with the phones selected, click on the button “Apply Configuration” located

next to the magnifying glass button. A message will be shown saying the operation

was successful. See figure 4-14.

Andere Handbücher für GXP2160

Inhaltsverzeichnis

Andere Grandstream Networks IP-Telefon Handbücher

Grandstream Networks

Grandstream Networks GXP1780 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GXV-3000 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GXV3240 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GXP2124v2 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GXP280/285 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GXV3175 Xml based downloadable phonebook Bedienungsanleitung

Grandstream Networks

Grandstream Networks GRP2624 Bedienungsanleitung

Grandstream Networks

Grandstream Networks BT-200 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GRP2615 Bedienungsanleitung

Grandstream Networks

Grandstream Networks Grandstream GXP-2000 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GXP-1100 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GXV3175 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GXP2170 Installationsanleitung

Grandstream Networks

Grandstream Networks GXP2130 Series Bedienungsanleitung

Grandstream Networks

Grandstream Networks GXP2160 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GXV-3140 Gebrauchsanweisung

Grandstream Networks

Grandstream Networks GXP2130 Series Gebrauchsanweisung

Grandstream Networks

Grandstream Networks GXP21 Series Bedienungsanleitung

Grandstream Networks

Grandstream Networks GXP-1100 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GXP2130 Series Bedienungsanleitung

Grandstream Networks

Grandstream Networks GDS3705 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GRP2624 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GRP2615 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GXV3240 Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung