Grandstream Networks GWN7000 Kurzanleitung

Grandstream Networks, Inc.

GWN7000 Multi-WAN Gigabit VPN Router

Firmware Upgrade and Backup Guide

P a g e | 2

GWN7000 Firmware Upgrade and Backup Guide

Table of Contents

INTRODUCTION.............................................................................................................3

UPGRADE GWN7000.....................................................................................................4

Upgrade Settings ...................................................................................................................................5

BACKUP AND RESTORE CONFIGURATION FILE ......................................................7

Backup GWN7000’s configuration.........................................................................................................7

Restore GWN7000’s Configuration .......................................................................................................7

Restoring Configuration Locally......................................................................................................8

Restoring Configuration using an HTTP, HTTPs or TFTP Configuration Server (Pending) ...........8

UPGRADE SLAVE GWN76XX WI-FI ACCESS POINTS ...............................................9

Batch Upgrade .......................................................................................................................................9

Single Upgrade ....................................................................................................................................10

Table of Figures

Figure 1: Maintenance Page .........................................................................................................................5

Figure 2: Backup and Restore Section .........................................................................................................7

Figure 3: Access Points.................................................................................................................................9

Figure 4: Upgrading Status .........................................................................................................................10

Figure 5: Device Configuration....................................................................................................................11

Figure 6: GWN76xx Upgrading ...................................................................................................................11

P a g e | 3

GWN7000 Firmware Upgrade and Backup Guide

INTRODUCTION

All Grandstream products’ firmware are improved and updated on a regular basis. Latest firmware versions

are available in http://www.grandstream.com/support/firmware

Published firmware versions in Grandstream official website have passed QA tests and included new

enhancements implemented, reported issues fixes for better user experience; all changes are logged in

Release Notes documents.

Grandstream recommends to read Release Notes document which may include special firmware upgrade

notices and always keep your devices up-to-date by upgrading their firmware versions regularly.

This document describes steps needed to upgrade GWN7000 firmware version, how to download backup

configuration and restoring it as well as paired GWN76xx Wi-Fi Access Points’ firmware, and covers

following scenarios:

Upgrade GWN7000 Multi-WAN VPN Router.

Backup and Restoring Configuration

Upgrade Slave GWN76xx Wi-Fi Access Points.

P a g e | 4

GWN7000 Firmware Upgrade and Backup Guide

UPGRADE GWN7000

The GWN7000 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the

TFTP/HTTP/HTTPS server and selecting a download method.

Follow below steps to successfully upgrade your device:

1. Access GWN7000 web interface and navigate to System Settings->Maintenance.

2. In Upgrade Via dropdown list, select appropriate protocol (HTTP, HTTPs or TFTP).

If using Grandstream server, select HTTP.

3. In Firmware Server field, enter the FQDN or IP Address of the server where the firmware file is

located.

If using Grandstream server, enter “firmware.grandstream.com”. To upgrade to beta firmware (if

available) enter “firmware.grandstream.com/BETA”.

4. Press Save button.

5. To start the upgrade, there are two options:

a. Press Upgrade Now button to start upgrade immediately.

b. Press Reboot button to restart the unit. GWN7000 will contact firmware server to start

upgrade if option “Check/Download New Firmware at Boot” is enabled.

6. If a new firmware is available, GWN7000 will download the firmware file and start upgrade process.

Please refer to Firmware Upgrade Settings for advanced options.

Important:

The GWN7000 will reboot automatically after the firmware upgrade is done.

Please do not interrupt or power cycle the GWN7000 during upgrading process.

Notes:

Service providers should maintain their own firmware upgrade servers. For users who do not have

TFTP/HTTP/HTTPS server, some free windows version TFTP servers are available for download from:

http://www.solarwinds.com/products/freetools/free_tftp_server.aspx

http://tftpd32.jounin.net

End users can also choose to download a free HTTP server from http://httpd.apache.org/ or use

Microsoft IIS web server.

The latest firmware is available at http://www.grandstream.com/support/firmware. Unzip downloaded

file and make the firmware file (*.bin) available in your firmware server.

P a g e | 5

GWN7000 Firmware Upgrade and Backup Guide

Figure 1: Maintenance Page

Upgrade Settings

Upgrade settings are available at GWN7000 web interface ->System Settings ->Maintenance and include

following parameters:

Table 1: Network Upgrade Configuration

Upgrade Via

Allows users to choose the firmware upgrade method: TFTP, HTTP or HTTPS.

Firmware Server

Defines the server path for the firmware server. It can be set using an FQDN

or IP address.

Examples: “firmware.grandstream.com”

“192.168.1.200”

Check/Download New

Firmware at Boot

Allows the device to check if there is a new firmware in the configured firmware

server at boot. If available, the device will download the firmware file at booting

stage and reboot again to complete the upgrade process.

Automatic Check for New

Sets the value for automatic upgrade check interval, this will enable the

P a g e | 6

GWN7000 Firmware Upgrade and Backup Guide

Firmware

GWN7000 to check periodically the configured firmware server for new

firmware depending on the set option, users have 4 options:

Disabled: If selected, the device will never check for new firmware.

Users can still upgrade the device manually using “Upgrade Now” button.

Check at Every X Hours: Users can choose a value in hours for the

device to check periodically for a new firmware.

Check at Hour of Day: Users can set a value from 0 to 23 (hours) for

the device to check at that time for a new firmware. For example, if set to

22, the device will check for a new firmware every day at 10 p.m.

Check at Day of Week: Users can choose a day from the dropdown list

and set a value from 0 to 23 (hours). The device will check at configured

time and day for a new firmware.

Upgrade Now

Click on button to begin the upgrade process immediately.

Note: The device will reboot after downloading the firmware.

P a g e | 7

GWN7000 Firmware Upgrade and Backup Guide

BACKUP AND RESTORE CONFIGURATION FILE

The GWN7000’s configuration can be backed up locally or remotely via HTTP, HTTPS or TFTP protocols.

The backup file will contain all configuration, including Wireless settings if the GWN7000 is also acting as

an Access Points controller. This file can be used to restore the configuration on GWN7000 when necessary.

Backup GWN7000’s configuration

Users can backup the GWN7000’s configuration settings for restore purpose under WebGUI->System

Settings->Maintenance.

Figure 2: Backup and Restore Section

Click on to download and save locally the configuration file to your computer. The file will be

named Grandstream compressed as tar.gz format.

Restore GWN7000’s Configuration

Users have the ability to either restore the GWN7000’s locally by uploading the configuration file directly

from its WebGUI, or they can provision the configuration file via Network using TFTP, HTTP or HTTPs

protocols.

P a g e | 8

GWN7000 Firmware Upgrade and Backup Guide

Restoring Configuration Locally

Users can restore the GWN7000’s configuration settings from WebGUI->System Settings->Maintenance.

Click on to browse for the configuration to upload.

Notes:

Make sure that the backup file is compressed as tar.gz format.

The GWN7000 will reboot after the configuration file is restored successfully.

Restoring Configuration using an HTTP, HTTPs or TFTP Configuration Server (Pending)

The GWN7000 can be provisioned/restored via TFTP/HTTP/HTTPS by configuring the URL/IP Address for

the TFTP/HTTP/HTTPS server and selecting a provisioning method. Configure a valid URL for TFTP, HTTP

or HTTPS; the server name can be FQDN or IP address.

Follow below steps to successfully restore the configuration to your device:

1. Access GWN7000 web interface and navigate to System Settings->Maintenance.

2. In Upgrade Via dropdown list, select appropriate protocol (HTTP, HTTPs or TFTP).

3. In Config Server field, enter the URL of the server where the configuration file is located.

4. Press Save button.

5. To start the provisioning, click on Reboot, and the GWN7000 will download the configuration at boot.

P a g e | 9

GWN7000 Firmware Upgrade and Backup Guide

UPGRADE SLAVE GWN76XX WI-FI ACCESS POINTS

The GWN7000 Router is able to control and manage GWN76xx Wi-Fi Access Points, allowing it to provision

and upgrade them.

When GWN76xx Access Points series are being paired as slaves using GWN7000, users can upgrade their

paired access points directly from GWN7000’s WebGUI without the need of accessing the GWN76xx’s APs

configuration.

To upgrade a slave access point, log in to the GWN7000’s Web GUI as admin, and go to Access Points.

User can then upgrade slave GWN76xx access points in batch mode or upgrade a single slave access

point.

Batch Upgrade

When having multiple Paired Access Points, users have the ability to upgrade multiple devices at once to

the same firmware, this can be helpful in medium and large deployments where GWN7000 Router is used

also as Wi-Fi Controller.

Figure 3: Access Points

1. Make sure that firmware server path is set correctly under Maintenance.

2. Select the desired APs to upgrade.

3. Click on button to upgrade the selected paired access points.

Notes:

The units will download automatically the firmware from the configured server path, and reboot

afterwards to finish upgrade process.

The status of the devices will show “Upgrading”, wait until it finishes and reboots, then they will

appear online again.

P a g e | 10

GWN7000 Firmware Upgrade and Backup Guide

Figure 4: Upgrading Status

Important:

Do not select different models of Access Points as they may not have the same firmware version.

Please do not interrupt or power cycle the GWN76xx AP or GWN7000 Router during upgrading

process.

During upgrade process GWN76xx LEDs will be blinking in green, and turn to solid green

indicating successful firmware update. If firmware update fails, GWN76xx LEDs will be solid red.

Single Upgrade

Instead of upgrading multiple units at once, users can perform an upgrade to a single paired access points

if needed

1. Click on next to the paired device to access its configuration page

2. Scroll down and click on to upgrade the device.

Note: Make sure that firmware server path is set correctly under System Settings->Maintenance before

starting upgrade process.

Andere Handbücher für GWN7000

Inhaltsverzeichnis

Andere Grandstream Networks Netzwerk-Router Handbücher

Grandstream Networks

Grandstream Networks GWN7000 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GWN7000 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GWN7052 Bedienungsanleitung

Grandstream Networks

Grandstream Networks HandyTone ATA 486 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GWN7000 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GWN7062 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GWN7001 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GWN7000 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GWN7000 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GWN7000 Bedienungsanleitung

Grandstream Networks

Grandstream Networks HT-502 ATA Bedienungsanleitung

Grandstream Networks

Grandstream Networks GWN7000 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GWN7000 Bedienungsanleitung

Grandstream Networks

Grandstream Networks GWN70 Series Bedienungsanleitung

Grandstream Networks

Grandstream Networks GWN7000 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise