Grandstream Networks UCM63 Series Bedienungsanleitung

Grandstream Networks, Inc.

UCM63xx Series

Remote Connect EndPoint Configuration Guide

UCM630x series

Remote Connect EndPoint Configuration Guide

Page | 2

Table of Contents

INTRODUCTION......................................................................................................3

PREREQUISITES .......................................................................................................4

CONFIGURE IP PHONES VIA GDMS ....................................................................5

CONFIGURE UCM REMOTECONNECT SERVICE FOR IP PHONES....................7

MAKE CALLS USING IP PHONES ........................................................................10

Table of figures

Figure 1: UCM RemoteConnect Plan Information...............................................................................4

Figure 2: GDMS single configuration phone server ............................................................................5

Figure 3: GDMS batch configuration phone server.............................................................................6

Figure 4: GXV3370Account Configuration Page................................................................................7

Figure 5: GXV3370 AccountSIP Settings........................................................................................8

Figure 6: GXV3370 Phone SettingsGeneral Settings......................................................................8

Figure 7: GXV3370 TLS Configuration...............................................................................................9

UCM630x series

Remote Connect EndPoint Configuration Guide

Page | 3

INTRODUCTION

Thank you for purchasing the UCM6301/UCM6302/UCM6304/UCM6308 IP PBX. The Grandstream

UCM6300 series IP PBX is based on Asterisk 16 system. It provides powerful functions, friendly

interface for remote management and easy-to-expand all-in-one communication solution to enterprises

of all sizes. The UCM6300 series IP PBX supports up to 3000 extensions with PBX features including

audio/video calling, video conferencing, video surveillance, PBX data management and analysis, UCM

RemoteConnect, and device remote access. It is an ideal choice for enterprises looking for an all-in-

one solution for users to communicate efficiently and work productively.

The UCM6300 series IP PBX provides UCM RemoteConnect service which offers users a quick setup

to start working remotely including GS Wave web app usingWebRTC andWavemobile app onAndroid

and IOS system to communicate andjoin meetings, sync up and manage extension, receive alerts and

reports, view and manage storage via cloud, and much more. The UCM6300 UCM RemoteConnect

service is offered via Grandstream Device Management System (GDMS). Please visit GDMS platform

for UCM RemoteConnect service plan information and purchasing plan, device remote management,

cloud storage management and etc.

This document describes how to configure end users’ IP phones to register to UCM6300 series IP PBX

UCM using RemoteConnect service. With RemoteConnect service, IP phones behind NAT can register

to UCM6300 series and communicate with other devices without additional settings in your network.

UCM630x series

Remote Connect EndPoint Configuration Guide

Page | 4

PREREQUISITES

The UCM RemoteConnect service on UCM6300 series must be used with Grandstream Device

Management System (GDMS). After the UCM is connected with GDMS, the RemoteConnect

information displays as below on UCM6300 web GUIValue-added FeaturesUCM

RemoteConnect page. In this page, STUN Address, UCM Public Address and Public TLS Port

information are needed for IP phone to register to UCM6300 series.

Figure 1: UCM RemoteConnect Plan Information

Users can configure the IP phone to register to UCM6300 series and manage the IP phone remotely

via GMDS, or directly configure the account information on IP phone manually.

UCM630x series

Remote Connect EndPoint Configuration Guide

Page | 5

CONFIGURE IP PHONES VIA GDMS

The GDMS admin can configure IP phone remotely with the settings required for RemoteConnect. To

do so please follow the steps below:

Step 1: In your web browser, open the GDMS address and log in with your GDMS account:

http://www.gdms.cloud/login

Step 2: On the VOIP Account-SIP Account page, select the SIP account that needs to be assigned to

the phone, and click Button to edit account. Go to the following page:

Figure 2: GDMS single configuration phone server

Step 3: ClickAdd Server and select the external network server address reported by UCMRC.

Step 4: Then assign it to the phone, enter the MAC address of the phone, and the account location,

and select the UCMRC server address.

Step 5: Click Save to complete the configuration of UCMRC.

Or you can select multiple SIP accounts under VoIP AccountSIPAccount, click "Modify SIP Server"

at the top, and then select the UCMRC server address to change the phone's original SIP server

addresses to UCMRC server addresses in batches.

UCM630x series

Remote Connect EndPoint Configuration Guide

Page | 6

Figure 3: GDMS batch configuration phone server

Note:

1. When configuring the UCMRC server address to the phone, in order to make UCMRC work

normally, the system will automatically issue the following configuration to the phone:

SIP transport is configured as "TLS".

The STUN server is configured as the address of the UCMRC TURN service.

2. After assigning an account to the phone on the GDMS, if the phone cannot be registered or

there is a problem with the call after registration, please go to the phone to check whether the

configuration is correct in the following section [CONFIGURE UCM REMOTECONNECT

SERVICE FOR IP PHONES].

3. When deleting the phone's UCMRC server account, the system will automatically clear the

phone's STUN server configuration.

4. Terminal devices not supported on GDMS cannot be remotely managed and deployed.

UCM630x series

Remote Connect EndPoint Configuration Guide

Page | 7

CONFIGURE UCM REMOTECONNECT SERVICE FOR IP PHONES

IP phone end devices behind NAT in external network can register to the UCM6300 series for remote

work purpose.

Please refer to below configuration example on GXV3370.

1. Log in GXV3370 web UI as admin, navigate to AccountBasic Settings page and configure

the following:

SIP Server: Enter the UCM Public Address: Public TLS Port. This information can be found

under UCM web UIValue-added FeaturesUCM RemoteConnectPlan page.

NAT Travesal: STUN

Figure 4: GXV3370 Account Configuration Page

2. Go to AccountSIP Settings and configure SIP transport to “TLS”.

UCM630x series

Remote Connect EndPoint Configuration Guide

Page | 8

Figure 5: GXV3370 AccountSIP Settings

3. Go to phone’s Web UIPhone SettingsGeneral Settings, configure the STUN server to be

same as the one under UCM Web UIValue-added FeaturesUCM

RemoteConnectPlan page.

Figure 6: GXV3370 Phone SettingsGeneral Settings

4. Go to the phone’s web UISystem SettingsSecurity SettingTLS page, configure

“Minimum TLS Version” and “Maximum TLS Version” to be 1.2

UCM630x series

Remote Connect EndPoint Configuration Guide

Page | 9

Figure 7: GXV3370 TLS Configuration

UCM630x series

Remote Connect EndPoint Configuration Guide

Page | 10

MAKE CALLS USING IP PHONES

After configurating the IP phones with UCM RemoteConnect service, users can use the phone to make

audio/video calls and join GS Wave audio/video conferences.

Note：Presentation on end device IP Phones is currently not supported.

Below are the Grandstream devices that supports RemoteConnect services with UCM6300 series:

-GXV3350/GXV3370/GXV3380

-GXP series

-GRP series

-WP820

-DP750

-GVC series.

Andere Handbücher für UCM63 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Grandstream Networks Telefonanlage Handbücher

Grandstream Networks

Grandstream Networks UCM P800 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6100 Series Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6 series Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6100 Series Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6102 Bedienungsanleitung

Grandstream Networks

Grandstream Networks DP715 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6510 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6102 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6301 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6300 Series Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6510 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6100 Series Bedienungsanleitung

Grandstream Networks

Grandstream Networks GXE5102 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM630X Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6 series Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6510 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6108 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM630 Series Bedienungsanleitung

Grandstream Networks

Grandstream Networks GXE5024 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6510 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6300 Series Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6200 Series Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6102 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6102 Bedienungsanleitung

Beliebte Telefonanlage Handbücher anderer Marken

Allo.com

Allo.com Nano 2 Bedienungsanleitung

ZYCOD

ZYCOD ZX50 Bedienungsanleitung

Panasonic

Panasonic KX-TDA100BX Bedienungsanleitung

LV switch

LV switch IPPBX800 Gebrauchsanweisung

Edge-Core

Edge-Core VST3305 Bedienungsanleitung

Panasonic

Panasonic KX-T7625 - Digital Proprietary Speakerphone 24... Bedienungsanleitung

Rauland-Borg

Rauland-Borg Telecenter IV Bedienungsanleitung

ATCOM

ATCOM IPPBX IP02 Bedienungsanleitung

Panasonic

Panasonic KX-TVS50 - 2 Port Voicemail System Bedienungsanleitung

bintec elmeg

bintec elmeg elmeg hybird 600 Bedienungsanleitung

Panasonic

Panasonic KX-NS300 Bedienungsanleitung

MCK

MCK EXTender PBXgateway Bedienungsanleitung

Panasonic

Panasonic KX-NS300CN Betriebsanleitung

NEC

NEC SL1000 Bedienungsanleitung

Epygi

Epygi Quadro Quadro 2xi Bedienungsanleitung

SMC Networks

SMC Networks TigerVoIP SMCPBX10 Bedienungsanleitung

AGFEO

AGFEO AC 14 analog Bedienungsanleitung

Nortel

Nortel QSY22 Bedienungsanleitung