Grant's 57317 Montageanleitung
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 20j
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2020 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly an d se rv ic e may n ot b e in cl uded.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 For technical questions, please call 1-888-866-5797. Item 57317
Specifications
Drawer Load Capacity 22 lb
Side Tray Load Capacity 22 lb
IMPORTANT SAFETY INFORMATION
1. Do not roll the seat while loaded over rough surfaces,
such as concrete seams. Use on flat, level, hard
surface only. Wheels may scratch or dig into less
durable surfaces (such as linoleum or wood).
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
3. Use as intended only. Do not stand
on seat or lean back on seat.
4. This product is not a toy. Do not allow
children to play with or near this item.
5. Close all drawers completely before
sitting on or rolling Seat.
6. Keep bystanders out of the area during assembly.
7. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
8. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
9. Inspect before every use; do not use
if parts are loose or damaged.
10. Do not exceed 300 lb weight capacity.
Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.
11. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
12. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
Page 3For technical questions, please call 1-888-866-5797.Item 57317
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Use M6x40 Bolts, Washers, and Lock Nuts to
connect Short Frame (2) to the Long Frame (1).
Bolt (3)
Washer (4)
Nut (5)
Short Frame (2)
Long
Frame (1)
2. Place Tray Holder (15) in between Panels and
insert into the designated grooves on each Panel.
Tray Holder (15)
Rear Panel
3. Place Seat Base (16) onto Panels and use M6x25
Bolts and Washers to connect Panels to Base.
Bolt (23)
Washer (24)
Seat Base (16)
4. Use Head Caps (6), Flat Washers (7), and Spring
Washers (8) to connect Casters (9) to the Frame.
Head Cap (6)
Spring Washer (8)
Flat Washer (7)
Caster (9)
5. Slide Side Tray (19) onto the assembled
Frame and secure using two Lock Bolts.
Side Tray
(19) Lock Bolt (21)
6. Repeat process for the other Side Tray.
7. Attach Side Cup (20) by inserting into
designated slot on the Side Tray.
Side Cup (20)
Slot
Side Tray
8. Repeat process for the other Side Cup.
9. Attach Tray (18) by sliding into the
opening on Main Panel.
10. Attach Tool Holder (22) by securing it
to the opening on Rear Panel.
Page 4 For technical questions, please call 1-888-866-5797. Item 57317
Parts List and Diagram
Part Description Qty
1 Long Frame 2
2 Short Frame 2
3 Bolt M6x40mm 4
4 Flat Washer M6 8
5 Lock Nut M6 8
6 Hex Head Cap 4
7 Flat Washer for Caster 4
8 Spring Washer for Caster 4
9 Caster 4
10 Plastic End Cap 8
11 Main Panel 1
12 Rear Panel 1
Part Description Qty
13 Bolt M6x50mm 4
14 Cross Bar 2
15 Tray Holder 1
16 Seat Base 1
17 Seat 1
18 Tray 1
19 Side Tray 2
20 Side Cup 2
21 Lock Bolt 4
22 Tool Holder 1
23 Bolt M6x25mm 4
24 Flat Washer 13/23 8
1
10
12
22
2
4
3
6
7
8
9
11
13
24
24
23
14
16
18
19
20
21
17
15
4
5
Page 5For technical questions, please call 1-888-866-5797.Item 57317
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Page 6 For technical questions, please call 1-888-866-5797. Item 57317
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and
are not available individually as replacement parts.
Page 7For technical questions, please call 1-888-866-5797.Item 57317
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
26541 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797
Inhaltsverzeichnis
Andere Grant's Werkzeuge Handbücher
