Greatneck 80180 Service-Handbuch
UNPACKING
After unpacking the unit, inspect carefully for any
damage that may have occurred during transit. Check
for loose, missing, or damaged parts. If any damage is
observed, a shipping damage claim must be filed with
the carrier. DO NOT use the GreatNeck®Air Hose Reel
if broken, bent, cracked or damaged parts (including
labels) are noted. Any Air Hose Reel that appears
damaged in any way, operates abnormally or is missing
parts should be removed from service immediately.
If you suspect that the Air Hose Reel was subjected
to shock load (a load that was dropped suddenly,
unexpectedly, etc.) immediately discontinue use until it
has been checked by a factory authorized service center.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself
and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in
personal injury and/or damage to product or property. Please retain instructions for future reference.
Operating Instructions and Parts Manual 80180
3/17
2017 GREATNECK®
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
Thank you very much for choosing a GreatNeck®Product!
For future reference, complete the owner’s record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before
you begin using it. This product is designed for certain applications only. GreatNeck®cannot be responsible for issues arising from modification.
We strongly recommend this product is not modified and/or used for any application other than that for which it was designed. If you have any
questions relative to a particular application, DO NOT use the product until you have first contacted customer service to determine if it can or
should be performed on the product.
WARNING: Pursuant to California Proposition 65, this product contains chemicals known to the state of California to cause
cancer and birth defects or other reproductive harm. Wash hands after handling.
The following safety information is provided as a guideline to help you operate your Air Hose Reel under the safest possible conditions. Any tool
or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed. The following
safety instructions are to provide the user with the information necessary for safe use and operation. Please read and retain these instructions for
the continued safe use of your tool. Failure to follow instructions listed below may result in serious injury. In addition, make certain that anyone
who uses the equipment understands and follows these safety instructions as well.
WARNING
EXPLANATION OF SAFETY SIGNAL WORDS
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
NOTES: Provide clarity and helpful information.
AIR HOSE REEL
2
Operating Instructions and Parts Manual 80180
AIR HOSE REEL
3/17
2017 GREATNECK®
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your tool. Read this manual carefully. Learn the tool’s
applications and limitations, as well as, potential hazards specific to it.
2. Keep work area clean and well lit. Cluttered or dark work areas
invite accidents.
3. Keep children away. All children should be kept away from the work
area. Never let a child handle a tool without strict adult supervision.
4. DO NOT operate this tool if under the influence of alcohol or drugs.
Read warning labels on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, DO NOT
attempt to operate.
5. Use safety equipment. Eye protection should be worn at all times
when operating this tool. Use ANSI approved safety glasses.
Everyday eyeglasses are NOT safety glasses. Dust mask, non-skid
safety shoes, hard hat or hearing protection should be used in
appropriate conditions.
6. Wear proper apparel. Loose clothing, gloves, neck-ties, rings, bracelets
or other jewelry may present a potential hazard when operating this
tool. Keep all apparel clear of the tool.
7. DO NOT overreach. Keep proper footing and balance at all times when
operating this tool.
8. Check for damage. Check your tool regularly. If part of the tool is
damaged it should be carefully inspected to make sure that it can
perform its intended function correctly. If in doubt, the part should
be repaired. Refer all servicing to a qualified technician. Consult your
dealer for advice.
9. Keep away from flammables. DO NOT attempt to operate this tool near
flammable materials or combustibles. Failure to comply may cause
serious injury or death.
10.Store idle tools out of the reach of children and untrained persons.
Tools may be dangerous in the hands of untrained users.
11.Maintain tools with care.
12.Keep tools dry and clean.
13.Properly maintained tools are less likely to bind and are easier to
control. DO NOT use a damaged tool. Tag damaged tools “DO NOT
use” until repaired.
14.Check for misalignment or binding of moving parts, breakage of parts,
and any other condition that may affect the tool’s operation.
15.If damaged, have the tool serviced before using. Many accidents are
caused by poorly maintained tools.
16.Use only accessories that are recommended by the manufacturer for
your model. Accessories that may be suitable for one tool may become
hazardous when used on another tool.
17.Tool service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could
result in a risk of injury.
18.When servicing a tool, use only identical replacement parts. Use of
unauthorized parts or failure to follow maintenance instructions may
create a risk of injury.
19.Maintain a safe working environment. Keep the work area well lit.
Make sure there is adequate surrounding workspace. Keep the work
area free of obstructions, grease, oil, trash, and other debris. DO NOT
use this product in a damp or wet location.
20.Maintain labels and nameplates on this product. These carry important
information. If unreadable or missing, contact GreatNeck®for a
replacement.
21.Before using, read and understand all warnings, safety precautions,
and instructions as outlined in the vehicle manufacturer’s service
manual. It is beyond the scope of this manual to properly describe the
correct procedure and test data for each vehicle.
22.Engine parts that are in motion and unexpected movement of a vehicle
can injure or kill. When working near moving engine parts, wear snug
fit clothing and keep hands and fingers away from moving parts.
23.Keep hoses and tools clear of moving parts. Always stay clear of
moving engine parts. Hoses and tools can be thrown through the air if
not kept clear of moving engine parts.
24.Avoid accidental fire and/or explosion. DO NOT smoke near engine fuel
and battery components.
25.The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that
may occur. The operator must understand that common sense and
caution are factors which cannot be built into this product, but
must be supplied by the operator.
26.The manufacturer declines any and all responsibility for damage
to vehicles or components if said damage is the result of unskillful
handling by the operator or of failure to observe the basic safety rules
set forth in the instruction manual.
PURPOSE
The GreatNeck®Air Hose Reel is ideal for use in garages or
workshops with limited space. Ratcheting action locks the hose into
place at the desired length; another tug retracts the hose. Included
3/8" x 50' PVC hose is very flexible and rated to 300 PSI max.
Includes wall mount bracket.
SPECIFICATIONS
Hose Material PVC
Housing Material Polypropylene
Max Pressure 300 PSI
Hose Size 3/8"
Hose Length 50'
Fittings 1/4" NPT
ASSEMBLY
WARNING
Check the hose for wear before each use and ensure all the connections
are secure.
WARNING
DO NOT direct air from the air hose at yourself or others.
1. Remove the hose reel and accessories from the box.
2. Chose a suitable place close to water or air.
WARNING
Ensure that the structure to which the air hose is to be mounted is of
sound construction and that the mounting point will hold the working
strain of the hose when in use.
3. Using the mounting bracket as a template, mark the position for the
screws and drill 4 holes.
4. Attach the bracket to the wall using the 4 self-tapping screws.
5. Attach the hose reel to the mounting bracket.
NOTE: It is important the hose reel is installed horizontally and
approximately 3 feet from the ground
6. Connect the leader hose to the air source.
7. Pull the hose out slowly to the length required, release the tension and
the hose should lock into position, if it starts to retract then pull the
hose out slightly further to engage the locking mechanism of the reel.
NOTE: DO NOT over extend the hose as this will cause the mechanism to
malfunction, preventing the hose from retracting.
8. To release the hose and allow it to automatically rewind, pull the hose
out from the locked position and then release the tension on the hose.
WARNING
DO NOT dismantle the hose reel casing. To do so may result in damage
to the appliance and/or personal injury and will invalidate the warranty.
Internal maintenance, which will require the opening of the casing, must
only be undertaken by an authorized service center.
3
Operating Instructions and Parts Manual 80180
AIR HOSE REEL
3/17
2017 GREATNECK®
MAINTENANCE
WARNING
Disconnect the air hose reel from the air supply before servicing or
performing any maintenance.
To ensure reliable operation, clean the hose and casing regularly. DO NOT
spray or wet the unit, only clean with a cloth and warm water. DO NOT use
solvents or detergents, as these may cause permanent damage.
The hose reel is lubricated for life and does not require special
maintenance. If the casing needs to be opened, consult your nearest
authorized service agent.
WARNING
DO NOT attempt to loosen, or remove any casing screws.
Replacement of the supply hose should be carried out by skilled
personnel only, consult your nearest authorized service center.
STORAGE
When not in use, ensure that the hose reel is clean and dry. Place it
in a dark, dry, childproof location, where the temperature will remain
reasonably stable. DO NOT store in a nylon or plastic bag, as this may
cause condensation.
4
Operating Instructions and Parts Manual 80180
AIR HOSE REEL
3/17
2017 GREATNECK®
CONTACT US
3580 E. Raines Road, Suite 3, Memphis, TN 38118
Tel: 1-866-458-2472
www.greatnecksaw.com
GREATNECK®ONE YEAR LIMITED WARRANTY
If within one year from the date of purchase you find any defect in material or workmanship in this GreatNeck®product, through normal usage, either
return it to the place of purchase, or send it to GreatNeck®Tools for repair or replacement at our discretion. In order to obtain this service send your
tool and proof of purchase, transportation pre-paid, to GreatNeck®Tools LLC Q.A. Dept., 3580 E. Raines Road #3, Memphis, TN 38118. We will not be
responsible for lost or damaged goods during transportation, please insure your package.
GreatNeck®does not provide any warranty for products labeled other than GreatNeck®Tools LLC. GreatNeck®will not provide any warranty for
products subjected to abnormal use. Abnormal use includes, but is not limited to, abuse, accident, alteration, neglect, and unauthorized or unreasonable
use or repairs. This warranty does not cover blades, bits, files, sheathes, cases, accessories, bulbs, batteries, calibration, or finishes. We recommend
that you maintain your tools and sharpen or replace blades, batteries, bits and files as necessary. GreatNeck®reserves the right to make any changes
in construction or design at any time without any obligation in incorporating such changes to tools or equipment previously sold.
GreatNeck®is not liable for consequential or incidental damages arising from the breach of this, or any other, warranty whether expressed, implied, or
statutory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
This product is not guaranteed if used for industrial or commercial purposes. Please visit our website for full warranty information. TOLL FREE
HELPLINE: 1-866-458-2472.
Andere Greatneck Werkzeuge Handbücher
