Gree GPC12AE-A3NNA8A Bedienungsanleitung

Change for Life

Owner's Manual

Portable Air Conditioner

Thank you for choosing Portable Air Conditioner,please read this owner’s

manual carefully before operation and retain it for future reference.

GPC12AE-A3NNA8A

GPH12AE-A3NNA8A

SUMMARY

1. SUMMARY .................................................1

※. USAGE NOTICE ........................................

3--

ACCESSORIES AND INSTALLATION OF HEAT EXHAUST HOSE

12--14

9. ELECTRIC SCHEMATIC DIAGRAM .........................16

2. WORKING PRINCIPLE.......................................1

3. STRUCTURE...............................................2

4. OPERATING METHODS ................................ 3--6

5. .....7--9

8. CARE AND MAINTENANCE ...........................15--16

10. TROUBLESHOOTING .....................................17

11. USER NOTICES .........................................18

12. AFTER SALES SERVICE..................................19

13. INSTALLATION AND MAINTENANCE OF HEALTHY FILTER ..20

6. OPERATION OF THE REMOTE CONTROLLER ............ 10--11

NAMES AND FUNCTIONS OF THE REMOTE CONTROLLER

－2－

SUMMARY

－1－

This MOBILE AIR CONDITIONER is a small, movable air conditioner. It possessed the functions

of COOL, DRY and the Separate Ventilation, and depends on different places, it can

moved

will.

It is fit for home and office use, especially fit for the house with many rooms.With the compact

configuration, excellent workmanship, elegant appearance, it looks like a standing Benz car. It is

convenient for moving, energy saving, and with low noise.

Note: Please read this manual carefully before operating the unit, the manual is used for reference,

and the technical parameters are subject to change without notice.

WORKING PRINCIPLE

With the help of upper motor, the airflow of indoor pass through the evaporator becomes the

cooled wind, but with the help of lower motor, the airflow of indoor pass through the condenser

becomes the heated wind. There is two duct systems designed in its structure.The heated wind is discharged

by the rear outlet, the cooled wind is discharged by the front outlet,flow-guided by the louver,and it

brings the gentle cooling airflow,and the low temperature environment is maintained.

The Working Principle

Cooled wind

Upper motor

Lower motor

Evaporator

Airflow 1

Airflow 2

Capillary

Heated wind

Condenser

-2-

STRUCTURE

Front

Rear

Control panel

Air outlet

Handle

Upper air inlet grille

Heat air exhaust vent

Power cord

Lower air inlet grille

16℃- 30℃.

The working range of COOL mode and DRY mode：

Place requirements:

OPERATING METHODS

- 3 -

※.USAGE NOTICE

Unpack the Air Conditioner

Remove packaging materials

Remove and properly dispose the packaging materials. Remove tape and glue residue from surfaces before

WARNING

Excessive Weight Hazard

Use two or more people to move and install the air conditioner.

Failure to do so can result in back or other injury.

turning on the air conditioner. Rub a small amount of liquid dish soap over the adhesive with your fingers.

Wipe with warm water and dry it.

Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue.

These products can damage the surface of your air conditioner.

•

Place the air conditioner on a smooth level floor that strong enough to support the unit.

Allow at least 12 inches (50 cm) of air space on all sides of the unit for good air ventilation.

Place the unit in an area where the temperature will not fall below 16℃(61 ). The coils will be covered

with frost at temperatures below 16℃(61 ), and this may reduce performance.

NOTE: The portable air conditioner has wheels for easy movement, but it should only be rolled on smooth and

flat surfaces.Do not attempt to roll the portable air conditioner on carpet or over objects.

12″(50 cm)

min.

12″(50 cm)

min.

The appliance is for indoor use only,but shall not be installed in the laundry.•

The Max Cooling operation temperature for the air conditioner is 35 ℃.

The appliance shall be installed in accordance with national wiring regulations.

•

°F(86 )

°F

Power must adopt the rated voltage and special circuit for AC. And diameter of power cord should be big enough.

- 4 -

Electrical Requirements

death, fire, or electrical shock.

WARNING

Electrical Shock Hazard

Plug into a grounded 3-prong outlet.

Failure to follow these instructions can result in

Do not use an extension cord.

Do not use an adapter.

Do not remove ground prong.

Time-delay fuse or time-delay circuit breaker is recommended to be used.

All wiring must comply with local and national electrical codes and should be installed by a qualified electrician.

If you have any questions, contact a qualified electrician.

※.USAGE NOTICE

OPERATING METHODS

The wiring must be operated by the professional personnel by

circuit. Don't connect earth wire to water pipe or gas pipe. When the air conditioner is not used, please pull

out the power plug or cut off power supply.

following the national regulation.There must be

electric leakage protect switch and magnetic and heat drop-off air switch that with enough capacity in fixed

Including an air switch with suitable capacity, please note the following table. Air switch should be included

20A

Air switch capacityAir-conditioner (W)

GPC12AE-A3NNA8A

GPH12AE-A3NNA8A

magnet buckle and heating buckle function, it can protect the circuit-short and overload. (Caution: please do

not use the fuse only for protect the circuit)

ON/OFF key

MODE key

COOL mode

LED screen

DRY mode

FAN mode

WATER FULLlight

Control panel and the function

1. "ON/ OFF " key

Press once to start and press once more to stop the unit.

2."MODE" key

Press this button to change the operation mode in order of: GPC12AE-A3NNA8A:

COOL → DRY → FAN → COOL → DRY → FAN HEAT .

→

COOL ; GPH12AE-A3NNA8A:

3. key

In "COOL" or “HEAT”mode, press

" ""

Names and Functions Remote Controller

will increase morfdetcelesebnacerutarepmetehT

Press

" once, the temperature will decrease 1 "once,

℃( 1 )

°F

the temperature

“” “ ”key

- 5-

OPERATING METHODS

℃( 1 F)

°16℃(61 )～30℃( 86

°F°F).

GPC12AE-A3NNA8A:

ON/OFF key

MODE key

COOL mode

LED screen

DRY mode

FAN mode

HEAT mode

“” “ ”key

GPH12AE-A3NNA8A :

1). To select a place near the door and window, install the exhaust duct.

2). Press"MODE"key to select"COOL" mode.

3). Press key to set the suitable temp.

When the unit is running in the COOL mode, in order to keep the good cooling effect,

please pay more attention to:

1) If there is the direct sunlight near the window, please use the curtain to shield .

2) Donot use other heat sources in the air conditioner room.

Please close the door and window, in order to obtain the better dehumidifying effect:

Press "MODE" key, select the "DRY" mode, the unit will run in the "DRY" mode, at the

same time, the upper motor is running at the low speed, it is not adjustable.

COOL mode

1). Press “MODE ” key to select “HEAT”mode .

2). Press

HEAT

(not for only

cooling unit )

mode

CAUTION

DRY mode

When the unit runs in FAN mode, it can select 3 speeds.

FAN mode

When the tanks gets full

GPH12AE-A3NNA8A:HEAT light ) will flash and the buzzer will sound eight times,

the indicator(GPC12AE-A3NNA8A:WATER FULL light ;

LED window shows error code “ H8 ”, at the same time the unit stop running. We should

drain off the water .

WATER

DRAINAGE

"""

- 6-

OPERATING METHODS

16℃( 61 )～30℃86 .

°F°F

key to set the suitable temp.

or "

"""16℃( 61 )～30℃86 .

°F°F

- 7 -

●

AUTO

COOL

DRY

FAN

HEAT (Note:no for coolling only

unit As for cooling only unit, it won’t

have any action when it receives

the signal of heating operation.

FAN FAN speed button

Press this button once, fan speed will change

as below: Auto

Low speed Middle speed

High speed

Note:Under the Dry mode, the fan speed isn't

●

Simpleness swing mode is defaulted for wireless

remote control, in this mode, press this button,

(＋/－)

16 ～30

℃

●

Note: Be sure that there are no obstructions between receiver and remote control; Don't drop

or throw the remote control; Don't let any liquid in the remote control and put the remote control

directly under the sunlight or any place where is very hot

Signal transmitter

Remote control

ON/OFF

ON/OFF button

Press this button, the unit will be started or stopped,

which can clear the timer or sleeping function of

last time.

●

)

TEMP. button

(＋/－)

When press +button,the setting temp. will b

eht,nottub-sserpnehW,)1(1ybdesaercni

setting temp. will be decreased by 1

The temp. will be changed quickly

the button continuously and setting temp. range

℃

by pressing

●

Swing up and down button

℃

below.

Press this button, the running mode

will change as

Mode button

MODE

could turn on or turn off the Up and down

swing function.

When unit is turned off, synchronously press

"+" and Up and down swing buttons, it could

be switched between the simpleness swing

mode and stationary swing mode, at this time,

blinks 2 seconds.

In Stationary swing mode, press this button,the

angle for Up and down swing as show in below:

When up and down swing louver is working,

when turn off the unit, the siwng louver will

●

immediately stop at current position.

shows up and down swing louver swings back

and forth as show in the above figure.

adjustable, low fan speed is imperative,

but when operating this button, the wireless

remote control will send this signal.

NAMES AND FUNCTIONS OF THE REMOTE CONTROLLER

°F

(1 )

°F

℃°F°F

FAN

AUTO

OPER

HEALTH

AIR

FILTER

TURBO

ON/OFF

X-FAN

HOUR

HUMIDITY

ON/OFF

MODE

FAN

X-FAN

TURBO

TEMP TIMER

SLEEP LIGHT

- 8-

HEALTH function:there is no this function

for this unit. If press this key,the main unit

will click, but it also runs under original status.

wireless remote control, fan speed automatically

rotates, when repress this button, the fan speed

will run at previous setting fan speed.

TIMER

●

NOTE: This Remote control is universal, it could be used formany units, some buttons

of this control which are not available to this unit will not be described below.

On the status of the unit on, press this

button to set timer off. On the status of

the unit off, press this button to set timer

on. Press this key once, words Hour on(off)

will appear and flicker. In which case, press

+/- button to adjust time (press+/- button

the setting time range is from 0.5 to 24 hr.

;

continuously to change timing value quickly

then remote controller will send out the signal

immediately and hour on/off will stop flickering.

If the time of that no press timer button

under flickering status is above 5s,the timer

setting will quit. If the timer has been set,

press this button once again to quit it.

press this key once again to fix the time,

There is no this function for this unit.If

press this key,the main unit will click,but

it also runs under original status.

Temp. display button

TEMP

●

●Save energy function: this unit has no this

function, press this button, the main unit will

click, "SE" will be displayed on the LED of

Remote control

button Left and right swing button

Timer button

●The key can be changed between setting

NAMES AND FUNCTIONS OF THE REMOTE CONTROLLER

temperature and surrounding temperature,

and the main unit ill click.w

FAN

AUTO

OPER

HEALTH

AIR

FILTER

TURBO

ON/OFF

X-FAN

HOUR

HUMIDITY

ON/OFF

MODE

FAN

X-FAN

TURBO

TEMP

TIMER

SLEEP LIGHT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Gree Klimaanlage Handbücher

Gree

Gree VIREO+ VIR18HP230V1B Bedienungsanleitung

Gree

Gree GMV-ND22ZA/A-T Bedienungsanleitung

Gree

Gree GUHD series Bedienungsanleitung

Gree

Gree GWH09QB-K3DNA1G Bedienungsanleitung

Gree

Gree GEH09AA-K3DNA1A Bedienungsanleitung

Gree

Gree Vireo VIR09HP115V1A Bedienungsanleitung

Gree

Gree GMV-12WP/A-T Bedienungsanleitung

Gree

Gree MULTI21 CAS12HP230V1AC Bedienungsanleitung

Gree

Gree GMV-ND07T/C-T Bedienungsanleitung

Gree

Gree GWH18YD-K6DNA1A Bedienungsanleitung

Gree

Gree Bright Series Bedienungsanleitung

Gree

Gree KF-20GW/A20 Bedienungsanleitung

Gree

Gree GUD35PS/A-T Bedienungsanleitung

Gree

Gree GJC08BU-A6NRNJ2A Bedienungsanleitung

Gree

Gree GMV-N140U/A-T Bedienungsanleitung

Gree

Gree GMV-ND72PH/A-T(U) Bedienungsanleitung

Gree

Gree G16-6ESVWAC Bedienungsanleitung

Gree

Gree 4LIV30HP230V1A Bedienungsanleitung

Gree

Gree GPC07AK-K3NNA1A Bedienungsanleitung

Gree

Gree GVA60AH-M3NNA5A Bedienungsanleitung

Gree

Gree NCHS2D Bedienungsanleitung

Gree

Gree GMV-224WM/G-X Bedienungsanleitung

Gree

Gree GWC09KF-D3DNXXA Bedienungsanleitung

Gree

Gree RIO09HP115V1A Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung