Gree GWCN09JANK1A1A Bedienungsanleitung

★★★

★★

★Don't pull the power cord

★

220-240V~ 50Hz

★

Operation and maintenance-notices for operation

Please read the following carefully before operating.

WARNING

The power supply must be

inserted tightly.

Otherwise, it can cause an

electric shock, overheating

or fire.

Don't pull out the power

supply during operating.

It can cause an electric shock

or fire.

Never splice the power cord

or use an extended cord.

It can cause overheating or fire.

Don't use longer power lines

and don't share a same socket.

It can cause an electric shock

or fire.

Don't operate the air

conditioner with wet hands.

It can cause an electric shock.

to pull out the power supply.

It can cause an electric shock

or fire.

When cleaning, it is nece-

ssary to stop driving and turn

off the power supply.

It can cause the electric shock.

When having a burning smell

or smoke, please turn off the power

supply and contact with the service

center.

If the abnormity still exists, the unit

may be damaged, and may cause

electric shock or fire.

The air conditioner should be operated

with the voltage fluctuation, when the

voltage is very low, the compressor

vibrates terribly and that will damage

the refrigerant system.

Notices for operation

Earth: The ground

be connected!

If not, please ask the qualified person-

nel to install. Furthermore, don't conn-

ect each wire to the gas pipe, water

pipe, drainage pipe or any other impr-

oper places.

supply when not using the air

connditioner for a long time.

Otherwise, the accumulated dust

may cause fire or electric shock.

Select the most appropriate tem-

perature.

Keep room coo-

er than outside

about 5 degree.

It can preclude the electricity wasted.

Don't leave windows and

doors open for a long time

while operating the air conditioner.

It can decrease the air conditioning

capacity.

Don't block the air intake or outlet

vents of both the outdoor and indoor

units.

It can decrease the air conditioning

capacity or cause a malfunction.

Keep combustible spray away

from the units more than 1m.

It can cause afire or explosion.

If it is damaged, it may lead to

the fall of the unit and cause

the injury.

Please note whether the installed

stand is firm enough or not.

Don't step on the top of the

outdoor unit or place something

on it.

As falling off the outdoor unit

can be dangerous.

Don't attempt to repair

the air conditioner by yourself.

The wrong repair will lead to

an electric shock or fire, so

you should contact the service

center to repair.

★

★★Be sure to disconnect power

★

★★

★

Notices for operation

The power cords of this air conditioner adopt

Y-type connection, please don't cut off or damage

the power cords and control cords. If they are

damaged, please ask the qualified personnel to

change them.

The airflow direction can be adjusted appro-

priately. At operating, adjust the vertical airflow

direction by adjusting the louvers of upward/do-

wnward direction. And then, hold two ends of

left and right louver to adjust the horizontal air-

flow.

Louver of left/right direction Louver of upward/

downward direction.

Don't insert your hands or stick into the air

intake or outlet vents.

Otherwise it will cause accident.

Don't blow the wind to animals and plants

directly. It can cause a bad influence to them.

Don't apply the cold wind to the body for a

long time.

It can cause the health problems.

Don't use the air conditioner for other purposes,

such as drying clothes, preserving foods, etc.

Splashing water on the air conditioner can

cause an electric shock and malfunction. Don't place a space heater near the air

conditioner.

Or CO toxicosis may occur for imcomplete burning.

４

* If outdoor temperature got lower, please operate with the other heating ventilating

equipments.

* When outdoor temperature is low but high humidity, after a long while running, frost will

form in heat exchanger of outdoor unit, which effects heating effect, at this time, auto

defrosting function will act, the heat running will stop for 3-12mins.

* During the auto defrosting, the fan motors of indoor unit and outdoor unit will stop.

Notices for use

Working principle and special functions for cooling

Principle:

Air conditioner absorbs heat from indoors and then transmit it outdoors for discharging,

so that indoor ambient temperature can be decreased.By this principle,its heating capacity

will decrease with the increase of outdoor ambient temperature.

Anti-freezing function:

If the unit is running in COOL mode with low temperature, there will be frost formed

on the heat exchanger, when indoor heat exchanger temperature is decreased below 0

degree, the indoor unit microcomputer will stop compressor and outdoor fan running to

protect the unit.

Working principle and special functions for heating

Principle:

Air conditioner absorbs heat from outdoors and then transmit it intdoors for discharging,

so that indoor ambient temperature can be increased.By this principle,its heating capacity

will decrease with the decrease of outdoor ambient temperature.

This heating air circulation system can enhance the indoor temperature in a short time.

Defrosting:

During the defrosting, the indoor indicator flickers, temperature displays H1, the outdoor

unit may emit vapor. which is due to the defrosting, it isn't malfunction.

After defrosting finished,the heating will recover automatically.

* Please do not manually adjust the guide louver board angle. After adjusted, the guide

louver board may not close fully. At this time, it is need to pull out the power plug

of the air conditioner, then wait for 10s later, reinsert the power plug, the guide

Angle of air guide

louver board can reset.

５

24℃

-7℃

27℃

43℃

21℃

18℃

Notices for use

Anti-cool wind function:

In "Heat" mode, under the following three kinds of state, if indoor heat exchanger

doesn't arrive at certain temp., indoor fan will not act, in order to prevent cool wind

blowing(within 2 mins):

1. Heating starts 2.After Auto Defrost finished 3.Heating under the low temperature

The conditions of unit can't normally run

The following temperature range protection device may act, that may cause stop running.

"HEAT"

running

Outdoor temp.

above

Outdoor temp.

below

Indoor temp.

above

"COOL"

running

Outdoor temp.

above

Indoor temp.

below

"DRY"

running Indoor temp.

below

Under the relative humidity above 80% (doors and windows opened) when cooling or

dehumidifying for a long time, there will be dew dripping off near the air outlet.

Gentle Breeze

In the following situation, the indoor unit may blow gentle breeze,

and the guide louver rotate to a certain position:

1. In “Heat” mode, the unit turned on, the compressor doesn’t arrive the starting condition;

2. In “Heat” mode, the temperature arrive at the setting value and the compressor

stop running about 1min.

* Under COOL mode, when selecting and entering "Auto Quiet Design" function, within the

initial 10mins, the noise may loud.

Quiet Design:

* This function could be used and arranged in pairs with air conditioner and also could be

used under no unit starting condition for sole use, the detailed introduction please

Air Exchange:

refer to the operation method "Air Exchange" of remote control. The other notices

please refer to "Operation and installation guidelines for independent air exchange

device".

⑸

⑷⑹

⑺

⑻

⑶⑴

⑼

⑹

⑸

⑵

⑻

⑼

⑷

⑺

⑶

⑴

６

⑵

Names and functions of each part

Indoor unit

Air in

Air out

Outdoor unit

Wireless

remote control

Air in

Air out

Power cable

Displayer

Front panel

Filter

Guide louver

Wall pipe

Bind tape

Connection wire

Drainage pipe

Heating Cooling

Slient

Power/Run

Sleep

Set Temp

Receiver

⑵

７

Name and function of wireless remote control

ON/OFF button

Remote control

Signal transmitter

AUTO

COOL

DRY

FAN

(only for cooling and heating unit)

Don't drop or throw the remote control; Don't let any liquid in the remote control and

Note: Besure that there are no obstructions between receiver and remote controoler;

put the remote control directly under the sunlight or any place where is very hot.

●Press this button, Auto, Cool,Dry, Fan,

Heat mode can be selected circularly.

MODE button

MODE

Auto mode is default while power on.

Under Auto mode,the temperature will not

be displayed; Under Heat mode, the

●Press this button, Auto, Low, Middle, High

speed can be circularly selected. After

FAN button

FAN

powered on,Auto fan speed is default.

Under Blow mode, Low fan speed only

can be set up.

●Press this button, the clock can be set up,

signal blink and display.Within 5

CLOCK button

CLOCK

seconds, the value can be adjusted by

pressing + or - button, if continuously

press this button for 2 seconds above,

Operation of wireless remote control

●Press this button, the unit will be turned

on, press it once more, the unit will be

turned off. Sleep function will be canceled,

while unit off.

HEAT

initial value is 28℃

;Under other

modes,the initial value is 25℃．

（ｏＦ）

temperature displaying be required that will

keep original display status. and circulate

like this. No signal displayed. Remark: When

operating this button,the setting temperature

is displayed all the time on the wireless

Middle fan

Low fan

High fan

remote control.

●Press this button, can set up and select:

setting temperature (displaying the room),

TEMP button

TEMP

indoor ambient temperature (displaying

indoor temperature), outdoor ambient

temperature (displaying outdoor tempe-

rature),if there no outdoor ambient

and signal will be displayed. If there is

current time value is Clock value, otherwise

in every 0.5 seconds, the value on ten place

of Minute will be increased 1. During blinking,

repress the Clock button or Confirm button,

signal will be constantly displayed and

it denotes the setting succeeded. After

powered on, 12:00 is defaulted to display

is Timer value.

signal be displayed that denotes the

●Press this button at unit On or Off status,

Light On and Light Off can be set up.

LIGHT button

LIGHT

After powered on, Light On is defaulted.

８

Remote control

buttons of this control which are not available to this unit will not be described below.

This wireless remote control is universal, and it could be used for many units, some

●Press this button, the Blow On and Blow

Off can be set up. Under the Cool and Dry

BLOW button

BLOW

turned on; When repressing this button

once more, lcon Blow will be concealed,

at this time, the BLOW is turn off. After

powered on, Blow Off is defaulted. If

operating ON/OFF button and changing

mode to Cool, Dry, the status of BLOW

will stay in the original position. If unit

is off, only Blow off can be set up and send

the signal. This function is not available

under the Auto, Fan and Heat mode

and there is no Blow signal displayed.

●Under Cool or Heat mode, press this

button can turn on or turn off the Turbo

TURBO button

TURBO

function.After the Turbo function turned

on, the signal of Turbo will display. The

signal will be automatically cancelled if

changing the mode or fan speed.

●Presetting temperature can be increased.

Press this button, the temperature can be

+ button

set up, continuously press this button

and hold for two seconds, the relative

contents can quickly change, until unhold

this button and send the order that the ℃

（ｏＦ）signal will be displayed all the time.

The temperature adjustment is unava-

ilable under the Auto mode, but the order

can be sent if pressing this button.

Temperature of Celsius degree setting:

16-30 ; for Fahrenheit degree setting:

61-86.

●Presetting temperature can be decreased.

Press this button, the temperature can be

- button

set up, continuously press this button

and hold for two seconds, the relative

contents can quickly change, until unhold

this button and send the order that the ℃

（ｏＦ）signal will be displayed all the time.

The temperature adjustment is unav-

ailable under the Auto mode, but the order

can be sent by if pressing this button.

Names and functions of wireless remote control

Operation of wireless remote control

mode, press this button once, the Icon

Blow will be displayed, and BLOW is QUIET DESIGN BUTTON

●Press this button, the Quiet status is

under the Auto Quiet mode (display

"Auto Quiet "signal ) and Quiet mode

(display "Quiet" singal) and Quiet OFF

(there is no signal of "Quiet" displayed),

after powered on, the Quiet OFF is

defaulted. Note: the Quiet function

cannot be set up in Fan and Dry mode;

signal), the fan speed is not available.

Under the Quiet mode (Display "Quiet"

●One press this key to enter into

TIMER OFF setup, in which case

the TIMER OFF icon will blink.

The method of setting is the same

TIMER OFF

as for TIMER ON.

TIMER OFF BUTTON

Press this button,the display will circularly

changes as below:

●To turn off the unit by remote control,

the air exchange function will be autom-

atically turned off;At unit OFF, this function

could be solely turned on, at unit off press

this button, can set up Air Exchange On

(Display "Air exchange" signal) or OFF

("Air Exchange" disappear).There is no

Healthy function for this model,but if select

"Healthy" status, the main unit will beep,

and keep the original running status.

●

OFF

９

TIMER ON TIMER ON BUTTON

●

Remote control

buttons of this control which are not available to this unit will not be described below.

This wireless remote control is universal, and it could be used for many units, some

Name and function of wireless remote control

Operation of wireless remote control

I FEEL BUTTON

●Press this button once, to turn on the

I FEEL function, then the figure of "I FEEL"

will be displayed, after every press of

I FEEL

other function button, every 200ms to send

I FEEL once, after this function started,

the remote control will send temperature

to the main unit in every 10 minutes.When

repress this button, this function will be

turned off.

●Press this button to set swing angle,

which circularly changes as below:

OFF

This remote controller is universal.If it

receives threes kinds of following status,

the swing angle will remain original.

If guide louver is stopped when it is

swinging up

and down,it will remian its

present position.

indicates guide louver swings back and

forth

in the five places,as shown in the

figure.

SWING UP AND DOWN BUTTON

Timer On setting: Signal “ON” will blink

and display, signal will conceal, the

numerical section will become the timer

on setting status. During 5 seconds blink,

by pressing ＋or －button to adjust the

time value of numerical section, every

press of that button, the value will be

increased or decreased 1 minute. Hold

pressing ＋or －button, 2 seconds later,

it quickly change, the way of change is:

During the initial 2.5 seconds, ten numbers

change in the one place of minute, then

the one place is constant, ten numbers

change in the tens place of minute at 2.5

seconds speed and carry. During 5s blink,

press the Timer button, the timer setting

succeeds. The Timer On has been set up,

repress the timer button, the Timer On

will be canceled. Before setting the

Timer, please adjust the Clock to the

current actual time.

HEALTH BUTTON

１０

ＳＬＥＥＰ

●

Name and function of wireless remote control

Operation of wireless remote control

SLEEP BUTTON

Press this button, can select Sleep 1 ( ), Sleep 2 ( ),

Sleep 3 ( ) and cancel the Sleep, circulate between

these, after electrified, Sleep Cancel is defaulted.

Sleep 1 is Sleep mode 1, in Cool, Dehumidify modes: sleep status

after run for one hour later, the main unit setting temperature will

increase 1℃，setting temperature increased 2 ℃later, the unit will

run at this setting temperature; In Heat mode: sleep status after run

for one hour later, the setting temperature will decrease 1℃,2

hours later, setting temperature will decrease 2℃,then the unit will

run at this setting temperature.

●

Sleep 2 is sleep mode 2, that is air conditioner will run according to

the presetting a group of sleep temperature curve.

In Cool mode:

(1) When setting the initial temperature 16-23℃,after turned on

Sleep function, the temperature will be increased 1℃in every hour,

after 3℃later the temperature will be maintained, after 7hours later,

the temperature will be decreased 1℃,after that the unit will keep on

running under this temperature;

(2) When setting the initial temperature 24℃～27℃,after turned

on Sleep function, the temperature will be increased 1℃in every hour ,

after 2℃later the temperature will be maintained, after 7hours later,

the temperature will be decreased 1℃,after that the unit will

keep on running under this temperature;

(3) When setting the initial temperature 28℃～ 29℃, after turned

on Sleep function, the temperature will be increased 1℃in every

hour, after 1℃later the temperature will be maintained, after 7hours

later, the temperature will be decreased 1℃, after that the unit will

keep on running under this temperature;

(4) When setting the initial temperature 30℃, under this temper-

ature setting, after 7hours later, the temperature will be decreased

1℃, after that the unit will keep on running under this temperature;

In Heat mode:

(1) Under the initial presetting temperature 16℃, it will run under

this setting temperature all along.

(2) Under the initial presetting temperature17℃～ 20℃, after Sleep

function started up, the temperature will decrease 1℃in every

hour, after 1℃decreased, this temperature will be maintained.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Gree Klimaanlage Handbücher

Gree

Gree FP-51XD/A-K Bedienungsanleitung

Gree

Gree GEH09AA-K3DNA1B Bedienungsanleitung

Gree

Gree GMV6 Series Bedienungsanleitung

Gree

Gree MULTI21 CAS12HP230V1AC Bedienungsanleitung

Gree

Gree MULTI30HP230V1CO Bedienungsanleitung

Gree

Gree KF-20x2GW/A12 Bedienungsanleitung

Gree

Gree Vireo B 9 MBH Bedienungsanleitung

Gree

Gree FLEXX36HP230V1AO Betriebsanleitung

Gree

Gree GWC09QB-K3DNB2B Bedienungsanleitung

Gree

Gree GWC24TD-S3DNA1B Bedienungsanleitung

Gree

Gree FP-8XD/A-E Bedienungsanleitung

Gree

Gree GMV-Y96WM/A-F(U) Bedienungsanleitung

Gree

Gree GWH18MC-K3DNA2G Bedienungsanleitung

Gree

Gree GRS-CQ8.0Pd/NaEK Bedienungsanleitung

Gree

Gree GWH18KG-K3DNA6G/I Bedienungsanleitung

Gree

Gree NEO09HP115V1A Bedienungsanleitung

Gree

Gree GWH09NA-K3NNB1C Bedienungsanleitung

Gree

Gree G17-5MCVWAC1 Bedienungsanleitung

Gree

Gree GAA07AA-D3RNA2C Bedienungsanleitung

Gree

Gree GWH(07)UA-K3DNA1A/I Bedienungsanleitung

Gree

Gree GPC08AI-K3NNC6A Bedienungsanleitung

Gree

Gree FP-34WM-D Bedienungsanleitung

Gree

Gree G17-12ESHWAC Bedienungsanleitung

Gree

Gree ETAC2-07HC230VA-A Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung