Gree GMV-SPK1 Bedienungsanleitung

Thank you for choosing our product.

Please read this Installation & Owner’s Manual carefully before

operation and retain it for future reference.

If you lose this Manual, please contact your local distributor

visit www.greecomcomfort.com/resources now to download an

file the electronic version.

INSTALLATION MANUAL

MULTIPRO

SINGLE POINT

POWER KIT

COMPATIBLE MODELS:

GMV-24WL/(A)C-T(U)

GMV-28WL/(A)C-T(U)

GMV-36WL/(A)C-T(U)

GMV-48WL/(A)C-T(U)

GMV-60WL/(A)C-T(U)

GMV-SPK1

ATTENTION INSTALLING PERSONNEL

Prior to installation, thoroughly familiarize yourself with this Installation Manual. Observe

all safety warnings. During installation or repair, caution is to be observed

It is your responsibility to install the product safely and to educate the customer on its

safe use

CAUTIONS

ENSURE THAT ALL POWER IS DISCONNECTED PRIOR TO

ATTEMPTING INSTALLATION OF THIS KIT.

A MEANS OF STRAIN RELIEF AND CONDUCTOR PROTECTION

MUST BE PROVIDED AT THE SUPPLY WIRE ENTRANCE INTO CABINET.

USE COPPER CONDUCTORS ONLY

INSTALLATION MUST FOLLOW NATIONAL ELECTRIC CODE AND

OTHER APPLICABLE CODES

THIS KIT SHOULD NEVER BE USED TO POWER AUXILLARY HEATERS

AND SHOULD ONLY BE USED TO POWER THE INDOOR UNITS.

IF THIS APPLIANCE IS INSTALLED IN AN ENCLOSED AREA SUCH AS A GARAGE OR

UTILITY ROOM WITH ANY CARBON MONOXIDE PRODUCING APPLIANCE, ENSURE

THE AREA IS PROPERLY VENTILATED

1. Remove the front panel from the outdoor unit and electrical box cover as shown in outdoor unit

installation manual.

2. Use the wiring diagram below for reference during installation

Fuse

power wire to Indoor unit

(Field Provided)

Use one of the unit power

knockouts for indoor power

connection

Single point power kit includes:

2 - inline 15 amp fuses with fork connectors

2 - wirenuts

2 - spare fuses

Control wire and power wire should be run in separately to avoid communication interference

Outdoor unit MCA and MOCP values do not need to be adjusted when using this kit

3. Install fork connectors on inline fuse to L1 and L2 as shown

4. Using wire nuts, attach power wire to indoor units to inline fuses. Connect ground wire to

to indoor units to ground connection on outdoor unit as shown.

U.S. CONTACT INFORMATION TRADEWINDS, LLC

E-mail: info@twclimate.com

Contractor Support: 888-850-7928 | Mon-Fri 8 AM - 5 PM EDT

G R EECO M FOR T . C O M

CAT NO: GREE_FLEXX_ELECTRIC_HEATER_KIT_INSTALL_07262022

Inhaltsverzeichnis

Andere Gree Lüfter Handbücher

Gree

Gree DUCT09HP230V1BD Betriebsanleitung

Gree

Gree FHBQGL-D1.5DA-T Bedienungsanleitung

Gree

Gree FHBQ-D3.5-K Bedienungsanleitung

Gree

Gree KYT-2505 Bedienungsanleitung

Gree

Gree GC201205-I Bedienungsanleitung

Gree

Gree 3VIR09HP115V1A Bedienungsanleitung

Gree

Gree FHBQ-D8-K Bedienungsanleitung

Gree

Gree FP-34WAF-R Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung