Greenlee SDMM-1 Bedienungsanleitung

SDMM-1

DIGITAL MULTIMETER

MULTÍMETRO DIGITAL

MULTIMETRE

NUMERIQUE

INSTRUCTION MANUAL

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

Read and understand all of the instructions and safety

information in this manual before operating or servicing this tool.

Lea y entienda todas las instrucciones y la información sobre

seguridad que aparecen en este manual, antes de manejar estas

herramientas o darles mantenimiento.

Lire attentivement et bien comprendre toutes les instructions et

les informations sur la sécurité de ce manuel avant d’utiliser ou de

procéder à l’entretien de cet outil.

Description

The Greenlee SDMM-1 is a hand-held digital multimeter intended to measure AC and DC

voltage and resistance and to check diodes and verify continuity.

Specialized functions and capabilities include:

• Autoranging or manual ranging

• Display Hold for operating convenience

• Stow-away leads for added safety

Safety

Safety is essential in the use and maintenance of Greenlee tools and equipment. This

instruction manual and any markings on the tool provide information for avoiding hazards and

unsafe practices related to the use of this tool. Observe all of the safety information provided.

Purpose

This instruction manual is intended to familiarize all personnel with the safe operation and

maintenance procedures for the Greenlee SDMM-1 digital multimeter.

Keep this manual available to all personnel.

Replacement manuals are available upon request at no charge.

and are registered trademarks of Greenlee Textron.

KEEP THIS MANUAL

SDMM-1

Important Safety Information

Read and understand this material before operating or servicing

this equipment. Failure to understand how to safely operate this

tool can result in an accident causing serious injury or death.

This symbol is used to call your attention to hazards or unsafe practices which could

result in an injury or property damage. The signal word, defined below, indicates the

severity of the hazard. The message after the signal word provides information for

preventing or avoiding the hazard.

SAFETY ALERT SYMBOL

Immediate hazards which, if not avoided, WILL result in severe injury or death.

Hazards which, if not avoided, COULD result in severe injury or death.

Hazards or unsafe practices which, if not avoided, MAY result in injury or property

damage.

Important Safety Information

Electric shock hazard:

Contact with live circuits can result in severe injury or death.

Electric shock hazard:

• Do not apply more than the rated voltage between the two input terminals, or

between any input terminal and earth ground.

• Do not contact the test lead tips.

Failure to observe these warnings can result in severe injury or death.

Electric shock hazard:

• Do not use the unit if it is wet or damaged.

• Inspect the test leads before use. They must be clean and dry, and the insulation

must be in good condition.

Failure to observe these warnings can result in severe injury or death.

• Do not operate with the case open.

• Before opening the case, remove the test leads from the circuit and shut off the unit.

Failure to observe these warnings can result in severe injury or death.

SDMM-1

• Do not attempt to repair this unit. It contains no user-serviceable parts.

• Do not expose the unit to extremes in temperature or high humidity. See Specifications.

Failure to observe these precautions can result in injury and can damage the unit.

Unless measuring voltage or current, shut off and lock out power. Make sure that all

capacitors are discharged. Voltage must not be present.

Using this unit near equipment that generates electromagnetic interference can result

in unstable or inaccurate readings.

Important Safety Information

Identification

1. Removable Test Probe Negative (–), common probe or ground

2. Fixed Test Probe Positive (+) probe

3. Display 3-3/4-digit LCD (3199 maximum display) and bar graph

4. Feature Buttons See explanations under Using the Features

5. Warning Light Illuminates when voltage exceeds 50 V

SDMM-1

Display Icons

6. Continuity Symbol

7. — Polarity Indicator

8. Diode Symbol

9. M Mega (106)

10. k Kilo (103)

11. ΩOhms

12. m Milli (10-3)

Symbols on the Unit

Read the instruction manual.

Double Insulation

910 11 12 13 14

15 16

13. V Volts Indicator

14. AC AC Voltage Indicator

15. DC DC Voltage Indicator

16. Range Hold function is enabled.

17. Data Hold function is enabled.

18. Low Battery

19. OL Overload Indicator (numeric)

20. Overload Indicator (graph)

Opening and Closing the Unit

Do not apply force. Opening and closing the unit can be done without effort.

Applying force can damage the unit.

To Open

To Close

SDMM-1

Using the Features

• ON/OFF Press momentarily to toggle between power on and power off.

•RHPress once to enter the manual ranging mode. The icon will appear on the display.

Press repeatedly to step through the ranges. Press and hold to return to the automatic

ranging mode.

•DHPress momentarily to hold the present value on the display. Press again to exit this

mode.

• AC/DC Press momentarily to toggle between AC and DC measurements.

•Ω/ V Press momentarily to toggle between voltage measurement or the continuity, diode

and resistance set of functions.

•/ / ΩPress momentarily to toggle between continuity, diode and resistance

functions.

Operation

1. Press ON/OFF to turn on the unit. Select the proper function according to the Settings

Table.

2. See Typical Measurements for specific measurement instructions.

3. Test the unit on a known functioning circuit or component.

• If the unit does not function as expected on a known functioning circuit, replace the

battery.

• If the unit still does not function as expected, send the unit to Greenlee for repair.

4. Take the reading from the circuit or component to be tested

Settings Table

*Tone sounds below threshold. See Specifications.

Diode Table

The fixed test probe is positive and the removable test probe is negative when checking

diodes.

To measure this … press … and the tester

will indicate …

Continuity Ω/V until Ωappears; press resistance reading*

/ /Ωuntil appears on display

Diode Ω/V until Ωappears; press reading or OL

/ /Ωuntil appears on display

Resistance Ω/V until Ωappears on display resistance reading

Voltage (AC) AC/DC until VAC appears on display voltage reading

Voltage (DC) AC/DC until mVDC appears on display voltage reading

Fixed Test Probe Removable Test Probe Result

Anode Cathode Diode voltage drop

Cathode Anode .OL

Inhaltsverzeichnis

Sprachen:

Andere Greenlee Multimeter Handbücher

Greenlee

Greenlee 93-502 Bedienungsanleitung

Greenlee

Greenlee DM-860 Bedienungsanleitung

Greenlee

Greenlee DM-800 Bedienungsanleitung

Greenlee

Greenlee DM-100 Bedienungsanleitung

Greenlee

Greenlee 93-105 Bedienungsanleitung

Greenlee

Greenlee DM-20 Bedienungsanleitung

Greenlee

Greenlee GRDM-45 Bedienungsanleitung

Greenlee

Greenlee CM-330 Bedienungsanleitung

Greenlee

Greenlee DM-300 Bedienungsanleitung

Greenlee

Greenlee CM-410 Bedienungsanleitung

Greenlee

Greenlee DM-45 Bedienungsanleitung

Greenlee

Greenlee DM-60 A Bedienungsanleitung

Greenlee

Greenlee DM-860A Bedienungsanleitung

Greenlee

Greenlee DML-430 Bedienungsanleitung

Greenlee

Greenlee CMT-80 Bedienungsanleitung

Greenlee

Greenlee DM-820A Bedienungsanleitung

Greenlee

Greenlee CM-450 Bedienungsanleitung

Greenlee

Greenlee DM-810A Bedienungsanleitung

Greenlee

Greenlee DM-25 Bedienungsanleitung

Greenlee

Greenlee 93-604 Bedienungsanleitung

Greenlee

Greenlee CM-600 Bedienungsanleitung

Greenlee

Greenlee DM-500 Bedienungsanleitung

Greenlee

Greenlee DM-50 Bedienungsanleitung

Greenlee

Greenlee DM-830A Bedienungsanleitung

Beliebte Multimeter Handbücher anderer Marken

Agilent Technologies

Agilent Technologies 34420A Bedienungsanleitung

Fluke

Fluke 83 Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Fluke

Fluke 8846A Bedienungs- und Wartungshandbuch

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Amprobe

Amprobe Hexagon 60 Bedienungsanleitung