GridConnect WI232 Plus Bedienungsanleitung

WI232 Plus

Quick Start Guide

Revision A September 30, 2015

1-1

No part of this manual may be reproduced or transmitted in any form for any purpose other than the

purchaser's personal use, without the express written permission of Grid Connect, Inc. Grid Connect, Inc.

has made every effort to provide complete details about the product in this manual, but makes no warranty

of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability

or fitness for a particular purpose. In no event shall Grid Connect, Inc. be liable for any incidental, special,

indirect, or consequential damages whatsoever included but not limited to lost profits arising out of errors or

omissions in this manual or the information contained herein.

Grid Connect, Inc. products are not designed, intended, authorized or warranted for use as components in

systems intended for surgical implant into the body, or in other applications intended to support or sustain

life, or in any other application in which the failure of a Grid Connect, Inc. product could create a situation

where personal injury, death, or severe property or environmental damage may occur. Grid Connect, Inc.

reserves the right to discontinue or make changes to its products at any time without notice.

Grid Connect and the Grid Connect logo, and combinations thereof are registered trademarks of Grid

Connect, Inc. All other product names, company names, logos or other designations mentioned herein are

trademarks of their respective owners.

Grid Connect

1630 W. Diehl Road

Naperville, IL 60563, USA

Phone: 630.245.1445

Technical Support

Phone: 630.245.1445

Fax: 630.245.1717

On-line: www.gridconnect.com

1-2

Disclaimer and Revisions

The information in this guide may change without notice. The manufacturer assumes no responsibility for

any errors that may appear in this guide.

Date

Rev.

Author

Comments

09-30-15

Preliminary Release for WI232 Plus

1-3

1. Quick Start

Follow this guide to get your unit up and running fast.

The WI232 Plus kit contains the following items:

WI232 Plus wireless WiFi module with Antenna

+9VDC Power Supply (or similar power supply)

CD with user guides and other technical documents.

1.1 Setup

The WI232 Plus is a wireless version of the NET232 Plus Serial to Ethernet Adapter. The wireless version

contains an xPico wireless module with a Soft-AP for easy configuration.

The serial port settings and the WiFi settings must be configured for proper operation.

The configuration is done via an Internet browser. Once the WI232 Plus has established a connection via its

own unique SSID, the browser can be used to login to the unit directly and perform configuration.

The following sections will detail the steps for basic setup operation of the WI232 Plus unit.

1.2 2 Finding the wireless SSID

Connect power to the WI232 Plus board.

By default the Soft AP mode is enabled with a SSID of XpicoWiFi_xxxxxx, where xxxxxx are the last six

characters of the unique xPico Wi-Fi serial number. This number is shown on the serial number label

attached to the back of the case. For example, if the serial number on label were 0080A3947F8C, then the

SSID would be XpicoWiFi_947F8C.

When power is applied to the WI232 Plus unit, the wireless xPico module will broadcast its own unique

SSID. Before any communication with it, a WIFI connection must be established.

Note: The following images were captured in Windows 8

Click on the wireless network connection status icon in the tool tray.

Click on the XpicoWiFi SSID link to display the connect screen.

1-4

1.3 3 Making the WIFI Connection

The default security for the xPico Wi-Fi Soft AP is WPA2 and the passphrase is XPICOWIFI.

Click the ‘Connect’ button to establish the connection. Once you click on the button, you will be prompted to

enter the security key. The factory default key value is the same for all xPICO devices and can be changed

via the configuration interface.

Enter XPICOWIFI and click the Next button.

When the connection is made, the XPicoWiFi will show a connection.

1-5

1.4 4 Entering the xPICO configuration mode

Open a web browser and navigate to either xpicowifi.lantronix.com or 192.168.0.1.

http://xpicowifi.lantronix.com/

This will give you the following prompt:

Enter the User Name = admin and the Password = PASSWORD to access the Configuration and

Management web pages. (Both are case sensitive).

1-6

Upon entering the correct user name and password, you will see the top-level status menu.

Note that the Interface wlan0 shows it is disconnected.

1-7

1.5 5 Configuration Steps

Select and click on the LINE menu option (left side). There are two lines that can be configured. Verify Line

1(top, center) is selected.

Then click on ‘Configuration’ (near top, center) The Line 1 Configuration window appears.

The values shown above are the factory default. Match the configuration parameters to your serial device.

Note: if you change a setting, a Submit button will appear on the bottom of the window. Click Submit to save

permanently.

1-8

Next, select the Tunnel menu option from the left side. Verify Tunnel 1 is selected. Select the Accept

option at the top of the menu and match the following:

Note that we are using port # 10001. This will be used when we use Teraterm to access the WI232 Plus

data port.

Note: Teraterm is a free, downloadable terminal emulation program.

Note: if you change a setting, a Submit button will appear on the bottom of the window. Click Submit to save

permanently.

Andere Handbücher für WI232 Plus

Inhaltsverzeichnis

Andere GridConnect Netzwerk-Router Handbücher

GridConnect

GridConnect GC-ATC-405 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise