Griffin Technology B80 Bedienungsanleitung

www.Griffin-Stands.com

Cymbal Boom

Stand

www.Griffin-Stands.com

Griffin™ stands and accessories are manufactured

in several innovative factories responsible for

developing products that address the newest

needs and trends of the current market. We take

pride in the Griffin™ brand and endeavor to be on

the forefront of the musical stands and musical

and lighting accessories market.

Performance Issue, Uneven or Unstable- Make

sure all nuts and bolts are tight on the product. If they

are, then loosen all nuts and bolts 1 full turn counter-

clockwise, then go back and tighten each bolt only ½

turn tight. Then do a final tighten turn for another ½

turn tight. Next, Make sure there are not any missing

nuts or bolts. Third, ensure all parts on the product

are not broken or defective. Finally, Re-read the

assembly instructions or watch the product

demonstration video to ensure you have correctly

assembled or are using the product properly with

factory specifications.

Missing Parts- The pictures, videos and images

shown in this manual might have changed style or

count due to the product being redesigned. So in rare

cases the part may no longer be included or of a

different style. However, if you think you are missing

a part that is necessary to the assembly and use of

your product, then first carefully double check all

packaging for any parts you think are missing. Some

parts might be hiding in the packaging or loose in an

inner box.

User Manual

M o d e l # B 8 0

Griffin | 11408 Hwy 64 W, Tyler, TX 75704 |

[email protected] | www.Griffin-

Stands.com

For current product specifications, please to go

www.griffin-stands.com and type the model number

into the search bar. Locate the product listing to view

the current factory specifications. Thank you for purchasing the Griffin Cymbal Boom

Stand. Your product comes with a 1 year factory

warranty from purchase date. Please read all

assembly instructions prior to assembling your new

cart. Pictures that may aid in assembly can be found

by going to www.griffin-stands.com and typing B80

into the search bar.

Step 4 –At the tip of the boom arm is a pivot point with

another gear teeth which can be adjusted to your

preferred angle by turning the knob loose and tightening

once the desired angle is reached. Remove the top

cymbal felt by unscrewing the knob and place your

cymbal and place the top cymbal felt with the washer on

top as seen on Figure 6. This type of cymbal stand

comes with a counter weight that can be removed,

however removing this may cause for the stand to tilt

forward.

Step 1 –Take the tripod section of the stand and

spread the legs by using two (2) hands and tighten the

knob to secure the legs (See Figure 1) Please note that

under extension of the tripod legs may cause instability

while over extension may cause stand failure.

Step 2 –Unscrew the knob on

the top of the tripod stand and

inset the chrome middle section

all the way down (make sure

that the middle pipe is straight

down and use force if resistance

is felt while inserting the pipe).

Adjust the length of the chrome

pipe you inserted and use the

screw to secure the height of

the stand as shown in Figure 2

and 3. With this you can use the

included memory lock and

adjust it to your preferred

height. Please scan the QR Code below for the product

demonstration video. Or go to the URL shown here and find

the product video. www.Griffin-Stands.com/Videos

Step 3 –Take the boom

arm align the teeth

against the top of the

middle section, also add

pressure since the

spring needs to be in the

center and use the

turning knob to tighten.

Once this is in place the

boom arm can be

adjusted (See Figure 4

and 5)

Step 6 –For safety reasons, please always make sure to

test the stability and safety of the product before use.

Double check all nuts and bolts, knobs and connectors,

make sure that these are tight and securely fastened

before use of your product. Test the product under light

use or light loads the first time to confirm assembly and

structure of the product is correct.

Step 5 –To ensure stability make sure the front of the

boom is placed over a leg of the tripod. This type of

cymbal stand comes with a counter weight that can be

removed, however removing this may cause for the stand

to tilt forward. If your stand is wobbly or unstable, make

sure that the legs are spread wide or adjust the boom

arm the opposite way and bring down the height.

Andere Griffin Technology Rack & Stand Handbücher

Griffin Technology

Griffin Technology LK-518B Bedienungsanleitung

Griffin Technology

Griffin Technology APL1300T Bedienungsanleitung

Griffin Technology

Griffin Technology XX-396A Bedienungsanleitung

Griffin Technology

Griffin Technology AP3372 Bedienungsanleitung

Griffin Technology

Griffin Technology LK353 Bedienungsanleitung

Griffin Technology

Griffin Technology APL1300 Bedienungsanleitung

Griffin Technology

Griffin Technology Cabinet Mount Bedienungsanleitung

Griffin Technology

Griffin Technology RS657 Bedienungsanleitung

Griffin Technology

Griffin Technology LK551 Bedienungsanleitung

Griffin Technology

Griffin Technology WS993 Bedienungsanleitung

Griffin Technology

Griffin Technology APST01 Bedienungsanleitung

Griffin Technology

Griffin Technology AP34063 Bedienungsanleitung

Griffin Technology

Griffin Technology H40R Bedienungsanleitung

Griffin Technology

Griffin Technology XX-388W Bedienungsanleitung

Griffin Technology

Griffin Technology AP3614 Bedienungsanleitung

Griffin Technology

Griffin Technology LK341 Bedienungsanleitung

Griffin Technology

Griffin Technology Kiosk Desktop Mount Bedienungsanleitung

Griffin Technology

Griffin Technology C80 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung