Grizzly T32839 Bedienungsanleitung

NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

(FOR MODELS MFD. SINCE 11/21) #CS22152 PRINTED IN TAIWAN V1.11.21

Using Jig

Mount the Model T32839 on the tracks of the

T32838 Bandsaw Sled to smoothly feed logs

up to 113⁄4" wide across the table of your vertical

wood-cutting bandsaw.

IMPORTANT: Refer to the bandsaw manual for

information on safely operating your bandsaw.

Items Needed Qty

Vertical Bandsaw ............................................... 1

T32838 Bandsaw Sled ...................................... 1

To reduce risk of eye injury from flying

chips or lung damage from breathing dust,

always wear safety glasses and a respirator

when operating bandsaw.

4. Loosen lock knobs shown in Figure 2 and

and adjust log holders fully open.

To use jig:

1. Refer to Model T32838 Instructions to

install bandsaw sled on bandsaw.

2. DISCONNECT BANDSAW FROM POWER!

Figure 1. Crosscut jig slid onto bandsaw sled.

Tracks

Sled

Jig

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

MODEL T32839

SLIDING LOG

CROSSCUT JIG

INSTRUCTIONS

3. Align tracks of crosscut jig with tracks of

bandsaw sled, then slide jig onto sled (see

Figure 1).

Figure 2. Location of lock knobs and log holders.

Log

Holder

(1 of 2)

Lock Knob

(1 of 4)

-2- Model T32838 (Mfd. Since 11/21)

7. Connect bandsaw to power, turn bandsaw

ON, then slide jig forward on sled to feed

workpiece through blade and to complete cut.

If workpiece center of gravity (see Figure

4) extends too far right, jig can easily tip

off of bandsaw sled. Body parts could

be pulled into moving blade or pinched/

crushed if caught under falling workpiece. If

jig is not firmly seated on bandsaw sled, use

roller table (or other method of workpiece

support) or cut down workpiece to more

manageable length.

Figure 4. Example of center of gravity.

Center of Gravity

5. Rest workpiece between log holders and

align bandsaw blade with intended line of cut

(see Figure 3).

6. Adjust log holders until workpiece is secure,

then tighten lock knobs (see Figure 3).

Figure 3. Workpiece secured in log holders.

Lock Knob

(1 of 4)

Bandsaw Blade

Model T32838 (Mfd. Since 11/21)-3-

BUY PARTS ONLINE AT GRIZZLY.COM !

Scan QR code to visit our Parts Store.

T32839 Parts Breakdown & List

Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here

are available for purchase. Call (800) 523-4777 or visit our online parts store at www.grizzly.com to check for availability.

REF PART # DESCRIPTION REF PART # DESCRIPTION

1 PT32839001 CROSSCUT TABLE 4 PT32839004 KNOB M8-1.25, 12-LOBE, D39

2 PT32839002 LOG HOLDER 5 PT32839005 TRACK

3 PT32839003 CARRIAGE BOLT M8-1.25 X 15 6 PT32839006 BUTTON HD CAP SCR M5-. 8 X 10

Inhaltsverzeichnis

Andere Grizzly Industrieanlagen Handbücher

Grizzly

Grizzly G0877 Bedienungsanleitung

Grizzly

Grizzly G0884 Bedienungsanleitung

Grizzly

Grizzly T10460 Bedienungsanleitung

Grizzly

Grizzly G0708 Bedienungsanleitung

Grizzly

Grizzly T33447 Bedienungsanleitung

Grizzly

Grizzly T32716 Bedienungsanleitung

Grizzly

Grizzly H7590 Bedienungsanleitung

Grizzly

Grizzly G0708 Bedienungsanleitung

Grizzly

Grizzly G0937 Bedienungsanleitung

Grizzly

Grizzly T33850 Bedienungsanleitung

Grizzly

Grizzly G0479 Bedienungsanleitung

Grizzly

Grizzly T32537 Bedienungsanleitung

Grizzly

Grizzly T32718 Bedienungsanleitung

Grizzly

Grizzly G9933 Bedienungsanleitung

Grizzly

Grizzly T32710 Bedienungsanleitung

Grizzly

Grizzly G0656P Bedienungsanleitung

Grizzly

Grizzly G0757Z Bedienungsanleitung

Grizzly

Grizzly G0731 Bedienungsanleitung

Grizzly

Grizzly T31850 Bedienungsanleitung

Grizzly

Grizzly H7585 Bedienungsanleitung

Grizzly

Grizzly T20798 Bedienungsanleitung

Grizzly

Grizzly T32841 Bedienungsanleitung

Grizzly

Grizzly G3102 Bedienungsanleitung

Grizzly

Grizzly G0738 Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung

BAC

BAC BCP2D Bedienungsanleitung