Grizzly T30372 Bedienungsanleitung

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

MODEL T30372

MOUNTING KIT

FOR G0613/G0614

INSTRUCTIONS

NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

(FOR MODELS MFD. SINCE 6/19) #CS20520 PRINTED IN TAIWAN

Introduction

The Model T30372 Mounting Kit is a quick and

easy way to mount the Model T30399 Infeed/

Outfeed Roller Set onto your G0613 or G0614

Metal Bandsaw.

Description Qty

A. Extension Plate Cover ................................ 1

B. Outfeed Roller Plate ................................... 1

C. Infeed Mounting Bracket ............................ 1

D. Outfeed Mounting Bracket.......................... 1

E. Hex Bolts M10-1.5 x 25 ............................ 10

F. Flat Washers 10mm ................................. 16

G. Hex Nuts M10-1.5 ....................................... 6

H. Set Screws M8-1.25 x 8 ............................. 2

Inventory

Needed for Setup

V1.09.19

Description Qty

A. Wrenches or Sockets 17mm ...................... 2

B. Assembled Model T30399 ......................... 1

C. Model G0613 or G0614 Metal Bandsaw .... 1

D. Precision Level ........................................... 1

Figure 1. Main inventory.

Figure 2. T30372 hardware.

Assembly

1. Attach outfeed mounting bracket to bandsaw

base with (2) M10-1.5 x 25 hex bolts and (2)

10mm flat washers, see Figure 3.

Figure 3. Outfeed mounting bracket attached.

-2- T30372 Mounting Kit for G0613/G0614 (Mfd. 6/19+)

2. Attach outfeed roller plate to mounting

bracket with (2) M10-1.5 x 25 hex bolts, (4)

10mm flat washers, and (2) M10-1.5 hex nuts

(see Figure 4).

Figure 4. Outeed roller plate attached.

3. Attach infeed mounting bracket to rear vise

bracket on bandsaw with (2) M10-1.5 x 25

hex bolts and (2) 10mm flat washers (see

Figure 5).

4. Attach assembled Model T30399 outfeed

roller table and leg to outfeed mounting

bracket with (2) M10-1.5 x 25 hex bolts, (4)

10mm flat washers, and (2) M10-1.5 hex nuts

(see Figure 6).

5. Attach assembled Model T30399 infeed roller

table and leg to infeed mounting bracket

using (2) M10-1.5 x 25 hex bolts, (4) 10mm

flat washers, and (2) M10-1.5 hex nuts (see

Figure 7).

Figure 6. Outfeed roller set attached to mounting

bracket.

Figure 7. Infeed roller set attached to mounting

bracket.

6. Set extension plate cover on roller plate,

leaving roller exposed.

Figure 5. Infeed mounting bracket attached to

saw vise.

Bandsaw Vise

Brackets

T30372 Mounting Kit for G0613/G0614 (Mfd. 6/19) -3-

BUY PARTS ONLINE AT GRIZZLY.COM!

Scan QR code to visit our Parts Store.

7. Tops of all rollers should be level with vise

bracket work surface. Adjust heights of tables

by loosening, adjusting, then retightening

hardware of legs and mounting brackets (see

Figure 5 & 8).

8. If rollers and vise bracket are not quite level,

insert (2) M8-1.25 x 8 set screws into mount-

ing bracket and tighten until level (see Figure

9).

Figure 8. Rollers level with vise bracket.

Vise Bracket

Work Surface

Tops of

Rollers

Figure 9. Location of leveling set screws.

T30372 Parts Breakdown & List

REF PART # DESCRIPTION REF PART # DESCRIPTION

1 PT30372001 EXTENSION PLATE COVER 6 PT30372006 ROLLER

2 PT30372002 HEX BOLT M10-1.5 X 25 7 PT30372007 OUTFEED MO UNTI NG BRACKET

3 PT30372003 ROLLER PLATE 8 PT30372008 SET SCREW M8-1.25 X 8

4 PT30372004 HEX NUT M10-1. 5 9 PT30372009 FLAT WASHER 10MM

5 PT30372005 I NFEED MO UNTI NG BRACKET

Andere Grizzly Rack & Stand Handbücher

Grizzly

Grizzly T31830 Bedienungsanleitung

Grizzly

Grizzly T10117 Bedienungsanleitung

Grizzly

Grizzly T33905 Bedienungsanleitung

Grizzly

Grizzly T33692 Bedienungsanleitung

Grizzly

Grizzly G0871 Bedienungsanleitung

Grizzly

Grizzly T32468 Bedienungsanleitung

Grizzly

Grizzly H7509Z Bedienungsanleitung

Grizzly

Grizzly T28000 Bedienungsanleitung

Grizzly

Grizzly T26979 Bedienungsanleitung

Grizzly

Grizzly T25862 Bedienungsanleitung

Grizzly

Grizzly T31832 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung