Groov-e GV-PS753 Bedienungsanleitung

GV-PS753

PORTABLE CD PLAYER WITH

DAB / FM DIGITAL RADIO

I N S T R U C T I O N MAN U A L

MENU CD MODE

SNOOZE

WARNING

TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: SHOCK HAZARD-DO NOT OPEN

LIGHTNING FLASH WITH ARROWHEAD SYMBOL -

within an equilateral triangle, is intended to alert the

user to the presence of uninsulated dangerous

voltage within the products enclosure that may be of

sufficient magnitude to constitute a risk of electric

shock to persons.

EXCLAMATION POINT - within an equilateral triangle,

is used to indicate that a specific component shall be

replaced only by the component specified in that

documentation for safety reason.

The following label has been affixed to the unit, listing the proper procedure for working with the laser beam:

CLASS 1 LASER PRODUCT LABEL -

This label is attached to the place as illustrated to inform that the

apparatus contains a laser component.

WARNING LABEL INFORMING OF RADIATION -

This label is placed inside the unit. As shown in the illustration. To

warn against further measures on the unit. The equipment contains

a laser radiating laser rays according to the limit of laser product of

class 1.

This equipment is a Class II or double insulated electrical appliance,

it does not require a safety connection to electrical earth.

CLASS 1 LASER PRODUCT

KLASS 1 LASER APPARAT

LUOKEN 1 LAISERLAITE

KLASSE 1 LASER PRODUKT

SAFETY INSTRUCTIONS

1.READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance isoperated.

2.WATER AND MOISTURE - The appliance should not be used near water.

3.VENTILATION - The appliance should be situated so that its location or position does not interfere with its proper

ventilation. that may impede the flow of air through the ventilation openings.

4.HEAT - The appliance should be situated away from heat sources such as radiators, stoves, or other appliances

(including amplifiers) that produce heat.

5.POWER SOURCE - The appliance should be connected to power supply only of the type described in the

operating instructions or as marked on the appliance.

6.POWER CORD PROTECTION - Power supply cords should be routed so that they are not likely to be walked on

or pinched by items placed upon or against them.

7.POWER LINES - An outdoor antenna should be located away from power lines.

8.OBJECT and LIQUID ENTRY - Care should be taken so that objects do not fall, and liquids are not spilled into

the enclosure through the openings.

9.ESD WARNING – If the display does not function properly or there is no reaction to any of the controls, this may

be due to electrostatic discharge. Switch off and unplug the set. Reconnect after a few

seconds.

10. DAMAGE REQUIRING SERVICE - The appliance should only be serviced by qualified service personnel when:

a. The power-supply cord or plug has been damaged.

b. Objects have fallen into, or liquid has been spilled into the appliance enclosure.

c. The appliance has been exposed to rain.

d. The appliance has been dropped, or the enclosure damaged.

e. The appliance does not appear to operate normally.

11. SERVICING-If an error display or malfunction occurs switch the appliance off and disconnect the power cord or

remove the batteries and then reconnect to your power source and switch the appliance back on.

BEFORE OPERATION-Please take care as dirty, damaged or warped CD’s may damage the appliance, care should

be taken and only use CD’s with the marks shown below

POWER SOURCES

to a wall outlet

Insert 8 x “C” size batteries

into the battery compartment

AC POWER

You can power your portable system by plugging the detachable AC power cord into the AC inlet at

the back of the unit and into a wall AC power outlet. Check that the rated voltage of your appliance

matches your local voltage. Make sure that the AC power cord is fully inserted into the appliance.

Power Source

AC 230V ~ 50Hz

Batteries: 8x1.5 "C" Size (UM-2/LR14)

(Optional, not supplied)

BATTERY POWER

Insert 8 x “C” size batteries into the battery compartment. Be sure that the batteries are inserted

correctly to avoid damage to the appliance. Always remove the batteries when the appliance will not

be used for a long period of time, as this will cause leakage from the batteries and subsequent

damage to your appliance.

Notes:

- Use batteries of the same type. Never use different types of batteries together.

- To use the appliance with batteries, disconnect the AC power cord from it.

to AC IN

LOCATION OF CONTROLS

FM ANTENNA

CD DOOR

VOLUME

CONTROL

LOCATION OF CONTROLS

Spe aker

LCD

Display

Power/Mode

Preset

Menu/Info

CD mode/Scan

Prev/Skip/Tune-

Next/Skip/Tune+

Alarm

10.

Sleep/Snooze

11.

Stop

12.

Play/Pause/Select

13.

Aux in

14.

Headphones

15.

Volume Control

16.

Carry handle

17.

CD compartment

18.

Telescopic antenna

19.

Battery compartment

20.

Power cable

OPERATION

Initial set-up

Press and release the Power/Mode button. The first time you switch on your

Boombox or if the station list is empty, your Boombox will automatically begin to scan

for DAB radio stations. A progress bar will show the progress of the scan and the

number of stations found during the scan will also be displayed.

When the scan is complete your Boombox will select the first available station and

begin to play. Stations are listed in numerical and then alphabetical order by default.

Change the mode

Pressandrelease the Power/Modebutton to change betweenDAB radio, FMradio, CD,

and AUX modes. Please check the display, which will confirm the mode.

Adjusting the volume

Turn the rotary volume control away from you to increase the volume and towards you to

decrease the volume.

Note: Always keep the volume within reasonable limits.

Time and date

The first time you listen to DAB radio, the time and date of your product will be

synchronized automatically to that broadcast by the DAB service in 24-hour mode; which

is in line with daylight saving, so there is no need to set the time and date manually.

Ifyoudowishtosetthetimeanddatemanually,turnontheBoomboxandfollowthe

steps below:

Press and hold the Menu/Info button until <Full scan> is displayed.

Press the or button to <System>. Press and release the Selectbutton.

<Time>isdisplayed. PressandreleasetheSelectbutton.<SetTime/Date>is

displayed. Press and release the Select button.

Set time is displayed and thehour digits will flash. Use or to scroll

to the correct hour. Press and release the Selectbutton.

The minutes will now flash. Press the or button to the correct minutes.

Press and release the Selectbutton.

OPERATION

Setdateisdisplayedandthedaywillflash. Press or button to select and

press the Select button, to set the day, month and year, using the same method as you

used to set the time.

When you confirm the correct date. ‘Time Saved’ is displayedandthe display returns

to <Set Time/Date>.

You can now press or to select and press the Select button,using

the same method as you did to set the time and date, to change the settings for:

12/24-hourclockdisplay.Thedateformat,DD-MM-YYYYorMM-DD-YYYYandtoauto

update the time from the DAB signal, FM signal, DAB or FM signal or no update.

Alarm setting

1. In standby mode (Press and Hold Power/Mode button for two seconds to enter standby mode),

press Alarm button and hold for 2 seconds, until It shows Alarm 1 or Alarm 2

2. Press the or button to select the alarm you want to set.

3. Press the Alarm button then press or to set alarm hour.

4. Press the Alarm button then press or to set alarm minute.

5. Press the Alarm button to set to FM mode /CD mode/Buzzer or DAB mode, press or

to select the mode. (Be sure to set your required wake up volume using the volume dial).

6. Press the Alarm button then press or to set alarm ON/OFF.

DAB radio mode

Check that your Boombox is in DAB radio mode. If you are not already in DAB mode,

briefly press and release the Power/Mode button on the front of the Boombox, until you

are in DAB mode (check the display).

The first time you use the Boombox or if the station list is empty, your Boombox will

automatically begin toscanfor DAB radio stations. A progress bar will show the progress

of the scan and the number of stations found during the scan will also be displayed.

When the scan is complete your Boombox will select the first available station and begin

to play. Stations are listed in numerical and then alphabetical order by default.

Telescopic radio aerial

Please make sure that the telescopic aerial on the back of the Boombox is fully extended

and adjusted before you attempt to tune to a DAB radio station (a vertical position is

recommended). This will ensure that the maximum signal strength is available when

the Boombox begins to scan. Extending the aerial also ensures the best possible sound

quality.

OPERATION

Changing DAB stations

In DAB mode:

Press the or button to select through the availablestations.

When the station that you would like to listen to is displayed, you can wait a short

while and your Boombox will tune to your displayed station or you can press and

release the Selectbutton.

OPERATION

Scanning for DAB stations

WithDABradio,additional stationsandservicesregularlybecomeavailablesoit’sagood

idea to carry out a manual scan every now and then to make sure that you have the most

up to date station listing stored within the memory of your Boombox.

If you have moved your Boombox to another location, e.g.: if you go on holiday, then it’s

also a good idea to carry out a manual scan.

In DAB mode:

1. Press and release the CD MODE /Scan button on the Boombox to begin a search for

stations. The display will change to ‘Scanning...’. A progress bar will show the progress

of the scan and the number of stations found during the scan will also be displayed.

Prune DAB stations

You can remove the DAB stations in the station list that cannot be received in your area.

These are listed with a ‘?’ prefix.

Press and hold the MENU/INFO button to enter the menuoptions. Press the

or button to select to <Prune>. Press and release the Selectbutton.

‘Prune?Yes<No>’isdisplayed.Pressthe or button to ‘<Yes>’. Pressand

release the Select button to prune the station list. Stations with a ‘?’ prefix will now

no longer bedisplayed.

Press and release the Menu/Info button to exit from the Menu.

Storing a DAB station preset

Your Boombox can store up to 10 DAB radio stations in its preset memories for instant

access to your favouritestations.

Tune the Boombox to the DAB radio station that you wish to preset.

PressandholdthePresetbuttonforapproximately2secondsuntil‘PresetStore’is

displayed.

Press the or button to select the preset location that you would like to store

the radio station to(1-10).

PressandreleasetheSelectbutton.Thedisplaywillconfirm‘PresetXstored’,where‘X’

is the number of the preset (1-10).

Note: Ifthereis alreadyanexistingDAB stationstored under apreset, it will beover

written when you store the newstation.

Inhaltsverzeichnis

Andere Groov-e CD-Player Handbücher

Groov-e

Groov-e GV-PS723 Bedienungsanleitung

Beliebte CD-Player Handbücher anderer Marken

RCA

RCA RP-7923 Bedienungsanleitung

Pioneer

Pioneer DEH-P3550MP XM Bedienungsanleitung

Philips

Philips AZ1207 Bedienungsanleitung

Philips

Philips CD582 Bedienungsanleitung

Philips

Philips AZ 6821 Bedienungsanleitung

Lasonic

Lasonic MSU-2020 Bedienungsanleitung

THOMSON

THOMSON RCD150 Bedienungsanleitung

Denon

Denon DCD-1420 Bedienungsanleitung

Panasonic

Panasonic SJ-MR100 Bedienungsanleitung

Onkyo

Onkyo DX-7210 Bedienungsanleitung

Sony

Sony MZ-R3 Bedienungsanleitung

Denon

Denon DVM-4800 Bedienungsanleitung

JBL

JBL MR-32 Bedienungsanleitung

RCA

RCA RCD152 Bedienungsanleitung

Technics

Technics SL-PS770A Bedienungsanleitung

Clarion

Clarion compact disc Bedienungsanleitung

Sony

Sony MZ-M10 Bedienungsanleitung

Philips

Philips Expanium AZ 1538 Bedienungsanleitung