Grundfos CMB-SP Booster PM2 Bedienungsanleitung

CMB, CMB-SP Booster PM2

Supplement to Quick Guide

GRUNDFOS INSTRUCTIONS

Table of contents

CMB, CMB-SP Booster PM2

English (GB)

Installation and operating instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Български (BG)

Упътване за монтаж иексплоатация. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Čeština (CZ)

Montážní a provozní návod. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Deutsch (DE)

Montage- und Betriebsanleitung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Dansk (DK)

Monterings- og driftsinstruktion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Eesti (EE)

Paigaldus- ja kasutusjuhend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Español (ES)

Instrucciones de instalación y funcionamiento . . . . . . . . . . . . . . . . . . . . . . . . . 35

Suomi (FI)

Asennus- ja käyttöohjeet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Français (FR)

Notice d'installation et de fonctionnement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Ελληνικά (GR)

Οδηγίες εγκατάστασης και λειτουργίας . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Hrvatski (HR)

Montažne i pogonske upute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Magyar (HU)

Telepítési és üzemeltetési utasítás. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Italiano (IT)

Istruzioni di installazione e funzionamento . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Lietuviškai (LT)

Įrengimo ir naudojimo instrukcija . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Latviešu (LV)

Uzstādīšanas un ekspluatācijas instrukcija. . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Nederlands (NL)

Installatie- en bedieningsinstructies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Polski (PL)

Instrukcja montażu i eksploatacji . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Português (PT)

Instruções de instalação e funcionamento . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Table of contents

CMB, CMB-SP Booster PM2

Română(RO)

Instrucţiuni de instalare şi utilizare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Srpski (RS)

Uputstvo za instalaciju i rad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Русский (RU)

Паспорт, Руководство по монтажу иэксплуатации . . . . . . . . . . . . . . . . . . 105

Svenska (SE)

Monterings- och driftsinstruktion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Slovensko (SI)

Navodila za montažo in obratovanje. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Slovenčina (SK)

Návod na montáž a prevádzku . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Türkçe (TR)

Montaj ve kullanım kılavuzu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126

Українська (UA)

Інструкції змонтажу та експлуатації . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Declaration of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138

English (GB)

English (GB) Installation and operating instructions

Original installation and operating instructions

CONTENTS

Page

1. Symbols used in this document

2. System sizing

3. Mechanical installation

1. Symbols used in this document 5

2. System sizing 5

3. Mechanical installation 5

4. Electrical installation 6

5. Startup 6

6. Alarms 6

6.1 Anti-cycling 6

6.2 Auto reset 6

7. Fault finding 7

8. Disposal 9

Warning

Prior to installation, read this document

and the quick guide. Installation and

operation must comply with local

regulations and accepted codes of good

practice.

Warning

The use of this product requires

experience with and knowledge of the

product.

Persons with reduced physical, sensory or

mental capabilities must not use this

product, unless they are under supervision

or have been instructed in the use of the

product by a person responsible for their

safety.

Children must not use or play with this

product.

Warning

If these safety instructions are not

observed, it may result in personal injury.

Warning

If these instructions are not observed, it

may lead to electric shock with consequent

risk of serious personal injury or death.

Caution

If these safety instructions are not

observed, it may result in malfunction or

damage to the equipment.

Note

Notes or instructions that make the job

easier and ensure safe operation.

Warning

The system in which the CM Booster is

incorporated must be designed for the

maximum pump pressure.

Caution

The default setting will cause the pump not

to stop until it reaches its maximum

pressure.

Warning

Before starting work on the CM Booster,

make sure that the power supply has been

switched off and that it cannot be

accidentally switched on.

English (GB)

4. Electrical installation

Check that the supply voltage and frequency

correspond to the values stated on the nameplate.

5. Startup

6. Alarms

6.1 Anti-cycling

Disabling the function

To disable the function, set DIP switch 7 to "OFF".

See the quick guide.

6.2 Auto reset

Warning

The electrical installation must be carried

out by an authorised person in accordance

with local regulations.

Warning

Before making any connections in the unit,

make sure that the power supply has been

switched off and that it cannot be

accidentally switched on.

The unit must be connected to an external

mains switch with a contact gap of at least

3 mm in all poles.

As a precaution, the unit must be

connected to a socket with earth

connection.

We recommend to fit the permanent

installation with an earth leakage circuit

breaker (ELCB) with a tripping current < 30

mA.

Caution

Do not start the pump until it has been

filled with liquid.

Caution

If a dry-running alarm has been activated,

find the cause before the pump is restarted

in order to prevent damage to the pump.

Note

In case of a very small consumption, the

anti-cycling function may detect this as

cycling and stop the pump inadvertently. If

this occurs, the function can be disabled.

Caution

Set auto reset to "on" only if there is

positive inlet pressure.

English (GB)

7. Fault finding

Warning

Before starting work on the pump, make

sure that the power supply has been

switched off and that it cannot be

accidentally switched on.

Fault Cause Remedy

1. The green light field

for "0 bar" is off even

if the power supply

has been switched

on.

a) The fuses in the electric

installation have burnt.

Replace the fuses. If the new fuses also

burn, check the electric installation.

b) The earth leakage circuit breaker

or the voltage-operated circuit

breaker has tripped.

Cut in the circuit breaker.

c) No power supply. Contact the power supply company.

d) The PM unit is defective. Repair or replace the PM unit.

2. The green "Pump

on" indicator light is

on, but the pump

does not start.

a) The power supply to the pump is

disconnected after the PM unit.

Check the plug and cable connections,

and check if the built-in circuit breaker of

the pump is switched off.

b) The motor protection of the pump

has tripped due to overload. Check if the motor/pump is blocked.

c) The pump is defective. Repair or replace the pump.

d) The PM unit is defective. Repair or replace the PM unit.

3. The pump does not

start when water is

consumed.

The "Pump on"

indicator light is off.

a) Too big difference in height

between the PM unit and the

tapping point.

Adjust the installation, or increase the

start pressure.

See the quick guide.

b) The PM unit is defective. Repair or replace the PM unit.

4. System without

pressure tank:

Frequent

starts/stops.

a) DIP switch 5 set to "ON". Set DIP switch 5 to "OFF". See the quick

guide.

b) Leakage in the pipework. Check and repair the pipework.

c) The non-return valve is stuck in

open position. Clean or replace the non-return valve.

5. System with

pressure tank:

Frequent

starts/stops.

a) The pressure tank has no

precharge pressure, or the tank

size is insufficient.

Check the tank precharge pressure, and

recharge the tank, if necessary.

If the size of the pressure tank is

insufficient, set DIP switch 5 to "OFF",

or replace the pressure tank.

b) Leaky non-return valve. Clean or replace the non-return valve.

6. The pump does not

stop.

a) The pump cannot deliver the

necessary discharge pressure. Replace the pump.

b) The start pressure is set too high. Decrease the start pressure.

c) The PM unit is defective. Repair or replace the PM unit.

d) The non-return valve is stuck in

open position. Clean or replace the non-return valve.

7. The red "Alarm"

indicator light is

permanently on.

a) Dry running. The pump needs

water. Check the pipework.

b) The power supply to the pump is

disconnected after the PM unit.

Check the plug and cable connections,

and check if the built-in circuit breaker of

the pump is switched off.

c) The motor protection of the pump

has tripped due to overload. Check if the motor/pump is blocked.

d) The pump is defective. Repair or replace the pump.

e) The PM unit is defective. Repair or replace the PM unit.

English (GB)

8. System without

pressure tank:

The red "Alarm"

indicator light

flashes once per

period.

a) Cycling.

A tap has not been closed entirely

after use.

Check that all taps have been closed.

b) Cycling.

There is a minor leakage in the

system.

Check the system for leakages.

9. System with

pressure tank:

The red "Alarm"

indicator light

flashes once per

period.

a) Cycling.

The pressure tank has no

precharge pressure, or the tank

size is insufficient.

Check the tank precharge pressure, and

recharge the tank, if necessary.

If the size of the pressure tank is

insufficient, set DIP switch 5 to "OFF",

or replace the pressure tank.

See the quick guide.

10. The red "Alarm"

indicator light

flashes twice per

period.

a) Maximum continuous operating

time (30 minutes).

The pump has been running

continuously for 30 minutes.

Check the system for leakages.

Disable the function to allow the pump to

run for 30 minutes.

See the quick guide.

11. The red "Alarm"

indicator light

flashes three times

per period, and each

pump start is

delayed a few

seconds.

a) Too many start/stop sequences

within a short period.

The pressure tank has no

precharge pressure, or the tank

size is insufficient.

Check the tank precharge pressure, and

recharge the tank, if necessary.

If the size of the pressure tank is

insufficient, set DIP switch 5 to "OFF",

or replace the pressure tank.

b) Too many start/stop sequences

within a short period.

The PM 2 is set to start/stop with

1 bar differential pressure, i.e.

DIP switch 5 is set to "ON", but no

pressure tank has been installed

in the system.

Set DIP switch 5 to "OFF".

12. The red "Alarm"

indicator light

flashes four times

per period.

a) Pressure sensor fault.

Repair or replace the PM unit.

13. The pump

performance is

unstable.

a) Pump inlet pressure too low. Check the inlet conditions of the pump.

b) Suction pipe is partly blocked by

impurities. Remove and clean the suction pipe.

c) Leakage in suction pipe. Remove and repair the suction pipe.

d) Air in suction pipe or pump. Vent the suction pipe/pump.

Check the inlet conditions of the pump.

14. The pump runs

backwards when

switched off.

a) Leakage in suction pipe. Remove and repair the suction pipe.

b) Foot or non-return valve defective. Remove and clean, repair or replace the

valve.

c) The foot valve is stuck in

completely or partly open position.

Remove and clean, repair or replace the

valve.

Self-priming pumps only:

15. The pump

performance is

unstable and the

pump is noisy.

a) The differential pressure across

the pump is too low. Close the tap gradually until the

discharge pressure is stable and the

noise has ceased.

16. When startup is

attempted, the pump

will start, but delivers

no pressure or flow.

a) Liquid column above non-return

valve in discharge pipe prevents

the pump from self-priming.

Empty the discharge pipe. Make sure

that the non-return valve does not hold

back liquid in the discharge pipe.

Repeat the startup procedure.

b) Suction pipe draws in air. Make sure that the suction pipe is

airtight from pump to liquid level.

Repeat the startup procedure.

Fault Cause Remedy

English (GB)

8. Disposal

This product or parts of it must be disposed of in an

environmentally sound way:

1. Use the public or private waste collection service.

2. If this is not possible, contact the nearest

Grundfos company or service workshop.

Subject to alterations.

17. The pump runs, but

does not deliver the

rated flow.

a) The internal valve did not close. Close the tap gradually until the

pressure or flow suddenly increases.

Then open the tap gradually until the

required flow is reached.

Fault Cause Remedy

Български (BG)

Български (BG) Упътване за монтаж иексплоатация

Превод на оригиналната английска версия

СЪДЪРЖАНИЕ

Стр.

1. Символи втози документ

2. Оразмеряване на системата

3. Механичен монтаж

1. Символи втози документ 10

2. Оразмеряване на системата 10

3. Механичен монтаж 10

4. Електрическо свързване 11

5. Пуск 11

6. Алармени сигнали 11

6.1 Антициклична функция 11

6.2 Автоматично нулиране 11

7. Установяване на повреди 12

8. Отстраняване на отпадъци 14

Предупреждение

Преди инсталиране прочетете този

документ икраткото ръководство.

Монтажът иексплоатацията трябва да

отговарят на действащата нормативна

уредба иутвърдените правила за добра

практика.

Предупреждение

Използването на този продукт изисква

познанеие иопитв работата стози

продукт.

Хора снамалени физически, осезателни

или умствени способности не трябва да

използват този продукт, ако не са под

наблюдение или не са инструктирани

относно използването на продукта от

човека, отговорен за тяхната

безопсаност.

Не се разрешава употребата на този

продукт или играта снегоот деца.

Предупреждение

Ако тези инструкции за безопасност не

се спазват, това може да доведе до

наранявания.

Предупреждение

Неспазването на тези инструкции може

да доведе до токов удар, който да

причини сериозно физическо

нараняване или смърт.

Внимание

Неспазването на тези инструкции за

безопасност може да доведе до

неизправност или повреда на

оборудването.

Указание

Бележки иинструкции, които улесняват

работата иосигуряват безопасна

работа.

Предупреждение

Системата вкоято се вгражда СМ

Бустер трябва да бъде проектирана да

издържа максималното налягане на

помпата.

Внимание

Снастройките по подразбиране,

помпата няма да спре, докато не

достигне максималното си налягане.

Предупреждение

Преди да започнете работа по

CM Booster, уверете се, че

захранването еизключено ине може да

бъде включено случайно.

Andere Handbücher für CMB-SP Booster PM2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Grundfos Wasserpumpe Handbücher

Grundfos

Grundfos SQ Produkthandbuch

Grundfos

Grundfos UPS 15 Bedienungsanleitung

Grundfos

Grundfos DWK Series Betriebsanleitung

Grundfos

Grundfos alpha2 l Bedienungsanleitung

Grundfos

Grundfos Conlift1 LS Bedienungsanleitung

Grundfos

Grundfos MQ Betriebsanleitung

Grundfos

Grundfos SL1.50 Bedienungsanleitung

Grundfos

Grundfos FireSAFE Series Bedienungsanleitung

Grundfos

Grundfos DPK Bedienungsanleitung

Grundfos

Grundfos Hydro 2000 F Bedienungsanleitung

Grundfos

Grundfos UPM3S Series Installations- und Betriebshandbuch

Grundfos

Grundfos DME 60 Bedienungsanleitung

Grundfos

Grundfos SRG 60 Hz Bedienungsanleitung

Grundfos

Grundfos AP70 Bedienungsanleitung

Grundfos

Grundfos Sololift2 CWC-3 Bedienungsanleitung

Grundfos

Grundfos PS.R.05-17 Bedienungsanleitung

Grundfos

Grundfos SP-G Bedienungsanleitung

Grundfos

Grundfos SEG Series Bedienungsanleitung

Grundfos

Grundfos MTH Series Bedienungsanleitung

Grundfos

Grundfos Hydro Multi-E Series Bedienungsanleitung

Grundfos

Grundfos PS.G Series Bedienungsanleitung

Grundfos

Grundfos SPK Series Bedienungsanleitung

Grundfos

Grundfos UPMM 15-95 130 Bedienungsanleitung

Grundfos

Grundfos CM Smart Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung