Grundig GD-CT-AC2805B Bedienungsanleitung
0
1
Quick Guide
About this guide
The guide includes instructions for using and managing the product.
Pictures, charts, images and all other information hereinafter are for
description and explanation only. The information contained in the
guide is subject to change, without notice, due to firmware updates
or other reasons.
Please find the latest version at WWW.GRUNDIG-SECURITY.COM
Limitation of Liability / Legal Disclaimer
Abetechs GmbH (Grundig Security) undertakes all reasonable efforts
to verify the integrity and correctness of the contents in this
document, but no formal guarantee shall be provided. Use of this
document and the subsequent results shall be entirely on the user’s
own responsibility. Abetechs GmbH (Grundig Security) reserves the
right to change the contents of this document without prior notice.
Design and specifications are subject to change without prior notice.
The product described herein, with its hardware, software and
documentation is provided “as is”, without any warranty, expressed
or implies, including without limitation, merchantability, satisfactory
quality, fitness for a particular purpose, and non-infringement of a
third party.
In no event will our company and its employees or agents be liable to
you for any special, consequential, incidental, or indirect damages,
including among others, damages for loss of business profits,
business interruption, or loss of data or documentation, in
QG-GD-CT-AC2805B-2018-10-08-V3-EN ©ABETECHS GMBH, DÜSSELDORF, GERMANY
2
connection with the use of this product, even if our company has
been advised of the possibility of such damages.
Regarding to products with internet access, the use of the product
shall be wholly at your own risks. Our company shall not take any
responsibilities for abnormal operation, privacy leakage or other
damages resulting from cyber-attack, hacker attack, virus inspection,
or other internet security risks; however, our company will provide
timely technical support if required. Surveillance laws vary by
jurisdiction before using this product in order to ensure that your use
conforms to the applicable law. Our company shall not be liable in
the event that this product is used with illegitimate purposes.
In the event of any conflicts between this manual and the applicable
law, the later prevails.
Trademark:
Each of trademarks herein is registered. The name of this product
and other trademarks mentioned in this manual are the registered
trademark of their respective company.
Copyright of this document is reserved. This document shall not be
reproduced, distributed or changed, partially or wholly, without
formal authorization.
OPEN SOURCE SOFTWARE LICENSE INFORMATION
The software components provided with Grundig products may
contain copyrighted software that is licensed under various open
source software licenses. For detailed information about the
contained open source software packages, the used package
versions, license information and complete license terms, please
3
refer to the product detail pages on our website. The complete open
source software license information is also included in firmware files
of affected products. Please also check your product’s CD-ROM and
manuals for additional information.
You may obtain the complete corresponding open source part of a
specific product from us for a period of three years after our last
shipment of this product by sending an email to: info@grundig-
security.com
Safety Instruction
Make sure that you only use the power adapter that is specified in
the specifications sheet of the product. If you use any other adapter
or connect the power supply incorrectly, this may cause explosion,
fire, electric shocks or damage the product. Do not connect several
devices to one power adapter as this may cause an adapter overload
and can lead to over-heating and fire. Make sure that the plug of the
power adapter is firmly connected to the power socket.
Do not place containers with liquids on the product. Do not place
conducting items like tools, screws, coins or other metal items on the
product. These may fall from the product or can cause fire or electric
shocks or other physical injuries.
Do not push or insert any sharp items or any objects into the device
as this may cause damage to the product, fire, electric shocks and/or
physical injuries.
Do not block any ventilation openings, if there are any. Ensure that
the product is well ventilated to prevent any over-heating.
Do not subject the device to physical shock or drop the product.
4
If the product uses batteries, please use a battery type that is
recommended by the manufacturer. Improper use or replacement of
the battery may result in the hazard of explosion.
Do not use any accessories that are not recommended by GRUNDIG.
Do not modify the product in any way.
If the product starts to smell or smoke comes out of the device,
immediately stop using the product and disconnect it from the power
supply to prevent fire or electric shocks. Then contact your dealer or
the nearest service center.
If the product does not work correctly, contact your dealer or nearest
service center. Never open, disassemble or alter the product yourself.
GRUNDIG cannot accept any liability or responsibility for problems
caused by attempted and unauthorized repair and maintenance.
Special Installation Instructions for Cameras
Do not touch the sensor module with your fingers.
Do not aim the camera or camera lens at a strong light such as the
sun or a bright lamp. Irreversible damage to the camera can be
caused by a strong light.
Do not expose the sensor of the product to laser beams as this may
damage the sensor.
If the product supports IR, you need to take some precautions to
prevent IR reflection. Do not install the product close to reflective
surfaces of objects as this may cause reflection. If the product has a
dome cover, please remove the protection film only after installation
5
to prevent dust or grease on the camera which can cause reflection.
The foam ring around the lens must be seated flush against the inner
surface of the bubble to isolate the lens from the IR LEDS. Fasten the
dome cover to the camera body so that the foam ring and the dome
cover are attached seamlessly.
For cleaning, use a clean cloth with a bit of ethanol and wipe it
carefully and gently. In any case, do not use alkaline detergents.
If a glove is provided in the package, please use it to open the product
cover. Never touch the product cover directly with fingers, because
the acidic sweat of the fingers may damage the surface coating of the
product cover.
6
Table of Contents
1 Introduction ................................................................................. 7
1.1 Product Features ............................................................. 7
1.2 Overview ......................................................................... 8
Overview of the Box Camera ......................................... 8
2 Installation ................................................................................. 11
Wall Mounting .............................................................. 11
Ceiling Mounting ........................................................... 16
3 Menu Description ....................................................................... 18
VIDEO.OUT .................................................................... 19
LANGUAGE .................................................................... 19
SETUP ............................................................................ 19
3.1.1 SMART FOCUS .................................................... 19
3.1.2 SCENE ................................................................. 20
3.1.3 LENS ................................................................... 20
3.1.4 EXPOSURE .......................................................... 20
3.1.5 Backlight ............................................................. 23
3.1.6 White Balance (WB) ........................................... 27
3.1.7 Day & Night ........................................................ 28
3.1.8 NR ...................................................................... 29
3.1.9 SPECIAL .............................................................. 31
3.1.10 ADJUST ............................................................. 42
3.1.11 RESET ............................................................... 44
3.1.12 EXIT .................................................................. 44
7
1 Introduction
1.1 Product Features
This camera adopts high performance sensor and advanced print
circuit board design technology. It possesses of high resolution, low
distortion, and low noise features, etc. It is extremely suitable for
surveillance system and image process system.
Main Features:
Adopt high performance CMOS, and supply high definition and
clear image;
Low illumination 0.01Lux@(F1.2, AGC ON)
Support IRC infrared filter auto switch;
Support OSD menu controlling, enable user to configure the
detailed parameters;
Support 3D DNR to get clear and fine image;
Support wide dynamic range function;
Support defogging function;
Support auto white balance, auto gain control;
Support coaxial camera controller.
Support POC (Power over Cable) function.
8
1.2 Overview
Overview of the Box Camera
1
2
Overview of the Box Camera
Table 1-1 Description of the Box Camera
No. Description
1 Lock Screw
2 Auto-Iris Drive Interface
The Auto Iris Interface
The auto iris interface is composed of four-square pins as shown in
Figure 1-2.
9
Damp+, damp-, drive+ and drive- pins are used in DC driven mode.
No. DC
1 Damp-
2 Damp+
3 Driver-
4 Driver+
Pins of the Auto Iris Interface
Rear Panel
The rear panel of the box camera is shown as follows:
3 4 5
67
89
1
2
Panel Description of the Box Camera
Inhaltsverzeichnis
Andere Grundig Digitalkamera Handbücher
Grundig
Grundig GSC 100 Bedienungsanleitung
Grundig
Grundig Livance LC 1100 Bedienungsanleitung
Grundig
Grundig GSC 110 Bedienungsanleitung
Grundig
Grundig GD-CI-AC2615M Bedienungsanleitung
Grundig
Grundig GSC 530 Bedienungsanleitung
Grundig
Grundig GCA-C2357V Bedienungsanleitung
Grundig
Grundig PICCA DMC 5200 Bedienungsanleitung
Grundig
Grundig GSC 510 Bedienungsanleitung
Grundig
Grundig PICCA DMC 5100 Bedienungsanleitung
Grundig
Grundig GBW-G0116X Bedienungsanleitung
