Grundig GD-TI-AT30105K Bedienungsanleitung

Quick Guide

About this guide

The guide includes instructions for using and managing the product. Pictures, charts,

images and all other information hereinafter are for description and explanation only.

The information contained in the guide is subject to change, without notice, due to

firmware updates or other reasons.

Please find the latest version at WWW.GRUNDIG-SECURITY.COM

Limitation of Liability / Legal Disclaimer

Abetechs GmbH (Grundig Security) undertakes all reasonable efforts to verify the

integrity and correctness of the contents in this document, but no formal guarantee

shall be provided. Use of this document and the subsequent results shall be entirely

on the user’s own responsibility. Abetechs GmbH (Grundig Security) reserves the

right to change the contents of this document without prior notice. Design and

specifications are subject to change without prior notice.

The product described herein, with its hardware, software and documentation is

provided “as is”, without any warranty, expressed or implies, including without

limitation, merchantability, satisfactory quality, fitness for a particular purpose, and

non-infringement of a third party.

In no event will our company and its employees or agents be liable to you for any

special, consequential, incidental, or indirect damages, including among others,

damages for loss of business profits, business interruption, or loss of data or

documentation, in connection with the use of this product, even if our company has

been advised of the possibility of such damages.

Regarding to products with internet access, the use of the product shall be wholly at

your own risks. Our company shall not take any responsibilities for abnormal

operation, privacy leakage or other damages resulting from cyber-attack, hacker

attack, virus inspection, or other internet security risks; however our company will

provide timely technical support if required. Surveillance laws vary by jurisdiction

before using this product in order to ensure that your use conforms to the applicable

law. Our company shall not be liable in the event that this product is used with

illegitimate purposes.

In the event of any conflicts between this manual and the applicable law, the later

prevails.

Trademark

Each of trademarks herein is registered. The name of this product and other

trademarks mentioned in this manual are the registered trademark of their

respective company.

distributed or changed, partially or wholly, without formal authorization.

OPEN SOURCE SOFTWARE LICENSE INFORMATION

The software components provided with Grundig products may contain copyrighted

software that is licensed under various open source software licenses. For detailed

information about the contained open source software packages, the used package

versions, license information and complete license terms, please refer to the product

detail pages on our website www.grundig-security.com. The complete open source

software license information is also included in firmware files of affected products.

Please also check your manuals for additional information.

You may obtain the complete corresponding open source part of a specific product

from us for a period of three years after our last shipment of this product by sending

an email to: info@grundig-security.com

Safety and Installation Instructions

Introduction

Please read these instructions carefully and keep them for future reference. You must

heed all the warnings and cautions as well as follow all the safety and installation

instructions.

The appearance of the products, functions and firmware or software upgrade may

differ from this manual.

GRUNDIG reserves the right to perform needed changes without prior notice.

Safety Instructions

Make sure that you only use the power adapter that is specified in the specifications

sheet of the product. If you use any other adapter or connect the power supply

incorrectly, this may cause explosion, fire, electric shocks or damage the product. Do

not connect several devices to one power adapter as this may cause an adapter

overload and can lead to over-heating and fire. Make sure that the plug of the power

adapter is firmly connected to the power socket.

Do not place containers with liquids on the product. Do not place conducting items

like tools, screws, coins or other metal items on the product. These may fall from the

product or can cause fire or electric shocks or other physical injuries.

Do not push or insert any sharp items or any objects into the device as this may

cause damage to the product, fire, electric shocks and/or physical injuries.

Do not block any ventilation openings, if there are any. Ensure that the product is

well ventilated to prevent any over-heating.

Do not subject the device to physical shock or drop the product.

If the product uses batteries, please use a battery type that is recommended by the

manufacturer. Improper use or replacement of the battery may result in the hazard

of explosion.

Do not use any accessories that are not recommended by GRUNDIG. Do not modify

the product in any way.

If the product starts to smell or smoke comes out of the device, immediately stop

using the product and disconnect it from the power supply to prevent fire or electric

shocks. Then contact your dealer or the nearest service center.

If the product does not work correctly, contact your dealer or nearest service center.

Never open, disassemble or alter the product yourself. GRUNDIG cannot accept any

liability or responsibility for problems caused by attempted and unauthorized repair

and maintenance.

Installation Instructions

It is necessary to fix the device firmly if the product is installed on a wall or ceiling.

Do not install the product on surfaces or in places that are vibrating. Do not install

the product near radiation sources.

Do not install the product near heat sources, like radiators or other equipment that

produces some heat. If the product is not classified by any IP class, do not install the

product in very cold or hot temperatures (please refer to the working temperature

specified in the specification sheet of the product), dusty, dirty or damp

environment.

If the product is classified by any IP class, never touch the product cover directly with

your fingers, because the acidic sweat of the fingers may damage the surface coating

of the product cover. To clean the inside and outside of the product cover, use a soft

and dry cloth. In any case, do not use alkaline detergents. The correct configuration

of all passwords and other security settings is the sole responsibility of the installer

and/or end-user (this applies especially to IP Cameras and Recorders).

Special Installation Instructions for Cameras

Do not touch the sensor module with your fingers. Do not aim the camera or camera

lens at a strong light such as the sun or a bright lamp. Irreversible damage to the

camera can be caused by a strong light.

Do not expose the sensor of the product to laser beams as this may damage the

sensor.

If the product supports IR, you need to take some precautions to prevent IR

reflection. Do not install the product close to reflective surfaces of objects as this

may cause reflection. If the product has a dome cover, please remove the protection

film only after installation to prevent dust or grease on the camera which can cause

reflection. The foam ring around the lens must be seated flush against the inner

surface of the bubble to isolate the lens from the IR LEDS. Fasten the dome cover to

the camera body so that the foam ring and the dome cover are attached seamlessly.

For cleaning, use a clean cloth with a bit of ethanol and wipe it carefully and gently.

In any case, do not use alkaline detergents.

If a glove is provided in the package, please use it to open the product cover. Never

touch the product cover directly with fingers, because the acidic sweat of the fingers

may damage the surface coating of the product cover.

Special Installation Instructions for IP Cameras

Make sure that the latest firmware is installed on the IP Device. You may get the

latest firmware from techsupport@grundig-security.com.

Table of Contents

1 Camera Introduction ................................................................................... 8

1.1 Overview ................................................................................................. 8

1.2 Appearance ............................................................................................. 8

1.3 Dimensions (mm) .................................................................................... 9

2 Operation ................................................................................................. 11

2.1 Installation and cable connection .......................................................... 11

2.1.1 Installation .......................................................................................... 11

2.1.2 Aviation Plug Installation .................................................................... 12

2.1.3 Cable Connection ................................................................................ 13

2.1.4 Connect .............................................................................................. 13

3. Common Faults ........................................................................................ 14

4 Network Set and Access ........................................................................... 17

4.1 Accessing by Web Browsers ................................................................... 17

4.1.1 Product Overview ............................................................................... 17

4.1.2 Web Login ........................................................................................... 17

4.1.3 Preview ............................................................................................... 18

4.1.4 Image Settings .................................................................................... 26

4.1.5 Alarm settings ..................................................................................... 33

4.1.6 Hot alarm ............................................................................................ 37

4.1.7 PTZ ...................................................................................................... 39

1 Camera Introduction

1.1 Overview

The GD-TI-AT30105K Thermal Positioning System Camera is a series of camera

specially designed for long range day and night surveillance. In the daytime, it uses a

telephoto lens and high-definition camera imaging, which can take into account both

short-range and large-range search and long-distance feature image collection; at

night, the most the advanced uncooled thermal imaging detector has good imaging

effect, is easy to conceal, and is not affected by external lighting; the whole machine

adopts network video output to ensure the convenience of video monitoring. The

whole machine is powered by a wide-width power supply, which is convenient for

customers to install and use.

1.2 Appearance

Figure 1-1 Front & side view

Figure 1-2 Rear side view

1.3 Dimensions (mm)

Figure 1-3 Front View

Figure 1-4 Sied vView

Figure 1-5 Front and side view of PTZ

Figure 1-6 Mounting Hole at the base of PT

Andere Handbücher für GD-TI-AT30105K

Inhaltsverzeichnis

Andere Grundig Sicherheitskamera Handbücher

Grundig

Grundig GD-CI-BT4537VH Bedienungsanleitung

Grundig

Grundig GCH-K0323D Bedienungsanleitung

Grundig

Grundig GU-CI-AP5634T Bedienungsanleitung

Grundig

Grundig GCH-K0326T Bedienungsanleitung

Grundig

Grundig GCI-M0566F Bedienungsanleitung

Grundig

Grundig GU-CI-AC5617E Bedienungsanleitung

Grundig

Grundig GCI-N0503B Bedienungsanleitung

Grundig

Grundig GD-TI-AP4507T Bedienungsanleitung

Grundig

Grundig GCI-K1523V Bedienungsanleitung

Grundig

Grundig GD-CI-AC4637P Bedienungsanleitung

Grundig

Grundig GD-CI-DT4637T Bedienungsanleitung

Grundig

Grundig GU-CI-AC5637T Bedienungsanleitung

Grundig

Grundig GCI-K1526T Bedienungsanleitung

Grundig

Grundig GCI-K1505B Bedienungsanleitung

Grundig

Grundig GCA-B1002B Bedienungsanleitung

Grundig

Grundig GD-CI-AC2616E Bedienungsanleitung

Grundig

Grundig GCI-K0589T Bedienungsanleitung

Grundig

Grundig GD-TI-BP1603T Bedienungsanleitung

Grundig

Grundig GD-CI-AT4747P Bedienungsanleitung

Grundig

Grundig GD-CI-AT8747P Bedienungsanleitung

Grundig

Grundig GCA-B1322D Bedienungsanleitung

Grundig

Grundig GCA-B0002B Bedienungsanleitung

Grundig

Grundig GD-CI-CT4537TH Bedienungsanleitung

Grundig

Grundig GD-TI-AT30105K Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung

Security Cameras Direct

Security Cameras Direct CFC6042IR Bedienungsanleitung