GSI Group Airstream 2018 Handbuch

Power Spread

Grain Spreader

Installation & Operating

Instructions

Owner's

Manual

MANUAL # PNEG-258

MODEL # 2018

POWER SPREADER OPERATING INSTRUCTIONS

TABLE OF CONTENTS

Warranty.......................................................................................................................4

Roof Warning, Operation & Safety................................................................................5

Safety Alert Decals........................................................................................................6

Grain Spreader Assembly Instructions..........................................................................7

Hardware List For SPD-2018.......................................................................................8

Grain Spreader Installation...............................................................................................11

Operating Instructions.................................................................................................12

Adjustment For Bin Fill...............................................................................................13

Maintenance........................................................................................................14

Correct Spreading Pattern.........................................................................................15

Power Spread Parts Assembly.....................................................................................16

Parts List For SPD-2018..................................................................................................17

Notes...........................................................................................................................18

WARRANTY

EXCEPT FOR THE ABOVE STATED EXPRESS LIMITED WARRANTIES, GSI MAKES NO WARRANTY OF

ANY KIND, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MER-

CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE IN CONNECTION WITH (i) PROD-

UCT MANUFACTURED OR SOLD BY GSI OR (ii) ANY ADVICE, INSTRUCTION, RECOMMENDATION OR

SUGGESTION PROVIDED BY AN AGENT, REPRESENTATIVE OR EMPLOYEE OF GSI REGARDING OR

RELATED TO THE CONFIGURATION, INSTALLATION, LAYOUT, SUITABILITY FOR A PARTICULAR PUR-

POSE, OR DESIGN OF SUCH PRODUCT OR PRODUCTS.

IN NO EVENT SHALL GSI BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL OR CONSEQUEN-

TIAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOSS OF ANTICIPATED PROFITS OR BENEFITS.

PURCHASER'S SOLE AND EXCLUSIVE REMEDY SHALL BE LIMITED TO THAT STATED ABOVE, WHICH

SHALL NOT EXCEED THE AMOUNT PAID FOR THE PRODUCT PURCHASED. THIS WARRANTY IS NOT

TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER. GSI SHALL HAVE NO OBLIGA-

TION OR RESPONSIBILITY FOR ANY REPRESENTATIVE OR WARRANTIES MADE BY OR ON BEHALF

OF ANY DEALER, AGENT OR DISTRIBUTOR OF GSI.

GSI ASSUMES NO RESPONSIBILITY FOR FIELD MODIFICATIONS OR ERECTION DEFECTS WHICH

CREATE STRUCTURAL OR STORAGE QUALITY PROBLEMS. MODIFICATIONS TO THE PRODUCT NOT

SPECIFICALLY COVERED BY THE CONTENTS OF THIS MANUAL WILL NULLIFY ANY PRODUCT WAR-

RANTY THAT MIGHT HAVE BEEN OTHERWISE AVAILABLE.

THE FOREGOING WARRANTY SHALL NOT COVER PRODUCTS OR PARTS WHICH HAVE BEEN

DAMAGED BY NEGLIGENT USE, MISUSE, ALTERATION OR ACCIDENT. THIS WARRANTY COVERS

ONLY PRODUCTS MANUFACTURED BY GSI. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL

OTHER WARRANTIES EXPRESS OR IMPLIED. GSI RESERVES THE RIGHT TO MAKE DESIGN OR SPECI-

FICATION CHANGES AT ANY TIME.

PRIOR TO INSTALLATION, PURCHASER HAS THE RESPONSIBILITY TO RESEARCH AND COM-

PLY WITH ALL FEDERAL, STATE AND LOCAL CODES WHICH MAY APPLY TO THE LOCATION AND

INSTALLATION.

THE GSI GROUP, INC. ("GSI") WARRANTS ALL PRODUCTS MANUFACTURED BY GSI TO BE FREE OF

DEFECTS IN MATERIAL AND WORKMANSHIP UNDER NORMAL USAGE AND CONDITIONS FOR A PE-

RIOD OF 12 MONTHS AFTER RETAIL SALE TO THE ORIGINAL END USER OF SUCH PRODUCTS. GSI'S

ONLY OBLIGATION IS, AND PURCHASER'S SOLE REMEDY SHALL BE FOR GSI, TO REPAIR OR RE-

PLACE, AT GSI'S OPTION AND EXPENSE, PRODUCTS THAT, IN GSI'S SOLE JUDGMENT, CONTAIN A

MATERIAL DEFECT DUE TO MATERIALS OR WORKMANSHIP. ALL DELIVERY AND SHIPMENT

CHARGES TO AND FROM GSI'S FACTORY WILL BE PURCHASER'S RESPONSIBILITY. EXPENSES

INCURRED BY OR ON BEHALF OF THE PURCHASER WITHOUT PRIOR WRITTEN AUTHORIZATION

FROM AN AUTHORIZED EMPLOYEE OF GSI SHALL BE THE SOLE RESPONSIBILITY OF THE PURCHASER.

ROOF WARNING, OPERATION & SAFETY

ROOF DAMAGE WARNING AND DISCLAIMER

WARNING! BE ALERT!

Personnel operating or working around

electric fans should read this manual.

This manual must be delivered with the

equipment to its owner. Failure to read

this manual and its safety instructions is

a misuse of the equipment.

The symbol shown is used to call

your attention to instructions con-

cerning your personal safety. Watch

for this symbol; it points out impor-

tant safety precautions. It means

"ATTENTION", "WARNING", "CAU-

TION", and "DANGER". Read the

message and be cautious to the

possibility of personal injury or

death.

SAFETY ALERT SYMBOL

Thank you for choosing a GSI/Air-

stream product. It is designed to give

excellent performance and service

for many years.

This manual describes the in-

stallation and operation of the Air-

stream Power Spread Grain

Spreader. It is designed to spread

grain and fines evenly throughout

the bin.

The principal concern of the GSI

Group, Inc. ("GSI") is your safety and

the safety of others associated with

grain handling equipment. This

manual is written to help you under-

stand safe operating procedures,

and some of the problems that may

be encountered by the operator or

other personnel.

As owner and/or operator, it is

your responsibility to know what re-

quirements, hazards and precau-

tions exist, and to inform all person-

nel associated with the equipment,

or who are in the area. Avoid any

alterations to the equipment. Such

alterations may produce a very dan-

gerous situation, where serious in-

jury or death may occur.

GSI DOES NOT WARRANT ANY ROOF DAMAGE CAUSED

BY EXCESSIVE VACUUM OR INTERNAL PRESSURE FROM

FANS OR OTHER AIR MOVING SYSTEMS. ADEQUATE

VENTILATION AND/OR "MAKEUP AIR" DEVICES SHOULD

BE PROVIDED FOR ALL POWERED AIR HANDLING SYS-

TEMS. GSI DOES NOT RECOMMEND THE USE OF DOWN-

WARD FLOW SYSTEMS (SUCTION). SEVERE ROOF DAM-

AGE CAN RESULT FROM ANY BLOCKAGE OF AIR PAS-

SAGES. RUNNING FANS DURING HIGH HUMIDITY/COLD

WEATHER CONDITIONS CAN CAUSE AIR EXHAUST OR

INTAKE PORTS TO FREEZE.

POWER GRAIN SPREADER OPERATION

SAFETY ALERT DECALS

Grain Systems, Inc. recommends

contacting your local power company,

and having a representative survey

your installation so the wiring is com-

patible with their system, and ad-

equate power is supplied to your unit.

Safety decals should be read

and understood by all people in the

grain handling area. The bottom

right decal should be present on the

inside bin door cover of the two ring

door, 24" porthole door cover and

the roof manway cover.

If a decal is damaged or is miss-

ing contact:

Grain Systems, Inc.

1004 E. Illinois St.

Assumption, IL 62510

217-226-4421

A free replacement will be sent to you.

GRAIN SPREADER ASSEMBLY INSTRUCTIONS

Power spread blade assembly.

The Power Spread is a direct drive

spreader. The unit is powered by a

totally enclosed, 115-volt, 1/3 HP

motor. Maximum grain capacity is

3,000 bushels per hour, depending

on moisture content and weight fo

grain. When properly adjusted, the

spreader will spread the grain and

fines evenly throughout the bin. This

will help prevent uneven drying.

The spreader unit is partially

assembled and is devided into three

different sections:

• Blade assembly

• Cone assembly

• Hardware

Power spread cone assembly.

Power spread hardware.

GRAIN SPREADER ASSEMBLY INSTRUCTIONS

Figure 1: Spreader cone assembly and blade assembly connection.

1. Carefully unpack the unit and

inspect for shipping damage.

2. Check tightness of all bolts in

the cone and blade assemblies.

3. Layout hardware and compare

with hardware list (Table 1).

4. Connect the spreader cone as-

sembly and the blade assembly

with one 1/4 x 1" roll pin and two

5/16-18 x 1/4" set screws (Fig-

ure 1).

5. Select the proper number of

diverter segments required

(See Diverter Segments chart).

Note: The various types of grain,

moisture content, bin diameter, and

capacity of fill auger are all conditions

that change the evenness of spread.

Some experimentation is needed to

attain the proper spread pattern.

HARDWARE LIST FOR SPD-2018

Part #Item #

SPD-2008

SPD-2010

S-4276

S-1147

S-845

S-396

S-6078

S-6079

SPD-2095

S-1101

S-2041

S-1102

0045341

---

DescriptionQuantity

Hanger Extention

Hanger Bracket

5/16-18 x 1 1/4" Bolt HHCS grade 5

5/16" Lockwasher

5/16" Flatwasher

5/16-18 Hex Nut

5/16-18 x 1/4" Set screw

1/4 x 1" Roll Pin

Diverter Segments

1/4-20 Hex HD Bolt

1/4" Lockwasher

1/4-20 Hex Nut

Danger Decal

1/4" Set Screw

1/4 x 1" Roll Pin

1/4" Set Screw

Cone Assembly

Blade Assembly

Fill Auger (diameter)

10" or larger

Diverter Segments (# required)

4 (equally spaced)

DIVERTER SEGMENTS CHART

GRAIN SPREADER ASSEMBLY INSTRUCTIONS

6. Each diverter segment is placed

outside of the spreader cone.

The bottom of the diverter seg-

ments points toward the center

of the spreader cone. Using two

1/4-20 bolts with lockwashers

and hex nuts, attach each

diverter segment to the

spreader cone (Figure 2).

7. Remove blade extension from

blade assembly for 24 foot diam-

eter bins and smaller (Figure 3).

8. Turn the three spreader

diverters outward (Figure 3).

The diverters on the blade are

turned inward for shipping pur-

poses. Further adjustments may

be required after installation.

9. Use two 5/16-18 x 1 1/4" bolts,

four 5/16" flatwashers, two 5/16"

lockwashers, and two 5/16-18

nuts to fasten each of the three

hanger brackets inside the

spreader cone (Figure 4). The

five mounting slots provided in

the hanger brackets are used for

adjusting the spreader up and

down inside the bin. Location is

dependent on several factors

such as interference with stirring

systems and grain bouncing off

the spreader motor onto bin roof.

Figure 2: The diverter segments connection to the spreader cone.

Diverter segments

SPD-2003 1/4-20 bolt

Spreader cone

SPD-2007

1/4" Lockwasher

1/4-20

Nut

Turn spreader diverters

SPD-2003

Note: Remove blade extention

(SPD-2002) for 24' & smaller bins

Figure 3: The diverter segments on the blade.

Figure 4: The spreader cone connection to the hanger bracket.

Hanger bracket

SPD-2010

Adjustable

5/16" Flatwasher

5/16-18 x 1 1/4"

Bolt

5/16-18 Nut

5/16" Lockwasher

5/16-18 Flatwasher

GRAIN SPREADER ASSEMBLY INSTRUCTIONS

Figure 5: The hanger extension connection to the hanger bracket.

10. Measure bin opening (hatch col-

lar) to select correct slots for

bolting hanger extensions to

hanger brackets. All GSI bins

with standard peak roof cap

have a hatch collar diameter of

Hanger bracket

(SPD-2010)

5/16-18 nuts (Figure 5).

11. Compare assembled unit with

parts assembly drawing on page

?? to make certain that all parts

are properly installed.

31 1/2". Loosely mount each

hanger extension to a hanger

bracket, using the appropriate

slots with two 5/16-18 x 1 1/4"

bolts, two 5/16" lockwashers,

four 5/16" flatwashers, and two

5/16-18 x 1 1/4" Bolt

Hanger extension

(SPD-2008)

5/16" Flatwasher

Adjustable

5/16-18 Nut

5/16" Lockwasher

5/16" Flatwasher

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere GSI Group Streuer Handbücher

GSI Group

GSI Group FFD-200-1 Bedienungsanleitung

Beliebte Streuer Handbücher anderer Marken

PEQUEA

PEQUEA GT-100 Bedienungsanleitung

Herculano

Herculano H2RS9 Bedienungsanleitung

Epoke

Epoke SKE8 Bedienungsanleitung

GEA

GEA EL44 Technisches Datenblatt

Boss Snowplow

Boss Snowplow TGS 800 Bedienungsanleitung

Fisher

Fisher EMERSON 168 Series Bedienungsanleitung

Fisher

Fisher POLY-CASTER 78601 Bedienungsanleitung

TurfEx

TurfEx RS7200 Betriebsanleitung

Fayat Group

Fayat Group DYNAPAC S100 Fehlerbehebungshandbuch

Art's-Way Manufacturing

Art's-Way Manufacturing X700 Installations- und Betriebshandbuch

Ferris

Ferris Pathfinder Series Bedienungsanleitung

EASTMAN

EASTMAN CR 500 Bedienungsanleitung

Nogueira

Nogueira RoyalFlow-600 Bedienungsanleitung

Buyers

Buyers TGS05B Bedienungsanleitung

Magnum

Magnum V-BOX PV Series Beilage

Meyer's

Meyer's VB280 Bedienungsanleitung

SnowEx

SnowEx VX-4210 Bedienungsanleitung

Kramer

Kramer VM-400HDCP Bedienungsanleitung