GSS PSDP 6200 Bedienungsanleitung

Assembly Instruction

PSDP 6200

- 2 - PSDP 6200

Contents

1 Safety regulations and notes ........................................................................4

2 General information ....................................................................................5

2.1 Packing contents ............................................................................5

2.2 Meaning of the symbols used ..........................................................5

2.3 Technical data ...............................................................................5

2.4 Description ...................................................................................6

2.5 Software query..............................................................................7

3 Assembly ....................................................................................................8

3.1 Installing the cassette......................................................................8

3.2 EMC regulations ............................................................................9

3.3 Overview of the cassette ..............................................................10

3.4 Connecting the cassette ................................................................10

3.5 Retrofitting a CA module ..............................................................11

4 The control panel at a glance .....................................................................12

4.1 Menu items .................................................................................12

4.2 Control panel ..............................................................................12

5 Programming ............................................................................................13

5.1 Preparation .................................................................................13

5.2 Programming procedure ...............................................................13

5.3 Programming the cassette ............................................................17

Selecting the cassette, displaying the software version ......................17

Selecting the channel strip ............................................................18

Selecting channel strip "A" ......................................................18

Selecting channel strip "B" .......................................................18

Switching the modulator off or on ..................................................19

Adjusting the output levels of the channel strips ...............................19

Switching the modulator off or on .............................................19

Adjusting the output levels of the channel strips ..........................19

Setting the TV standard of the output signal ....................................20

Selecting channel / frequency setting .............................................20

Setting the output channel .............................................................21

Setting the fine-tuning ...................................................................21

Setting the output frequency ..........................................................21

Selecting the Tuner (only channel strip B) ........................................22

Setting the LNB oscillator frequency ...............................................23

Configuring the CA module (only channel strip A) ...........................23

Setting the LNB oscillator frequency ..........................................23

- 3 - PSDP 6200

Configuring the CA module (only channel strip A) ......................23

Setting the input symbol rate .........................................................24

Setting the input frequency / Reception quality ................................24

Setting the input frequency .......................................................25

Reception quality ....................................................................25

Channel selection ........................................................................26

Selecting the TV station sound / Setting the volume level ..................27

Selecting the TV station sound ..................................................27

Setting the volume level ...........................................................27

Setting the audio mode / audio output ...........................................27

Setting the audio mode ...........................................................28

Setting the audio output ...........................................................28

Selecting the picture format ...........................................................28

Switching WSS/teletext off or on ...................................................28

Switching WSS off/on ............................................................29

Switching teletext mode off/on .................................................29

Activating test lines ......................................................................29

Locking the regional window ........................................................29

Subtitle settings............................................................................30

Setting teletext subtitle pages ...................................................31

Setting the teletext standard .....................................................31

DVB subtitle ...........................................................................31

Frame suppression ..................................................................31

Setting the time zone and summer time ...........................................32

Setting time-controlled, alternative channels ....................................33

Switching the timer on and off ..................................................33

Setting the duty cycle ..............................................................33

Setting the days of the week ....................................................33

Setting the LNB oscillator frequency (timer) ................................34

Configuring the CA module (timer; only channel strip A) .............34

Setting the input symbol rate (timer) ..........................................35

Setting the input frequency (timer) .............................................35

Channel selection (timer) .........................................................35

Selecting the TV station sound / Setting the volume level (timer) ...36

Saving settings ............................................................................36

6 Final procedures ........................................................................................ 37

7 Channel and frequency tables ....................................................................38

- 4 - PSDP 6200

1 safety regulations and notes

• Assembly, installation and servicing should be carried out by authorised

electricians.

• Switch off the operating voltage of the system before beginning with assem-

bly or service work or pull out the mains plug.

• Do not perform installation and service work during thunderstorms.

• Install the system so it will not be able to vibrate…

- in a dust-free, dry environment

- in such a manner that it is protected from moisture, fumes, splashing wa-

ter and dampness

- somewhere protected from direct sunlight

- not within the immediate vicinity of heat sources

- in an ambient temperature of 0 °C to +50 °C. In case of the formation of

condensation wait until the system is completely dried.

• Ensure that the head-end station is adequately ventilated. Do not cover the

ventilation slots.

• Beware of short circuits

• No liability is accepted for any damage caused by faulty connections or

inappropriate handling.

• Observe the relevant standards, regulations and guidelines on the installa-

tion and operation of antenna systems.

• The standards EN/DIN EN 50083 and IEC/EN/DIN EN 60728 must be

observed.

• For further information please read the assembly instructions for the head-

end station used.

• Test the software versions of the head-end station and the cassette and

update them if necessary. The current software versions can be found at

"www.mygss.eu".

Take action to prevent static discharge when working on the device!

Electronic devices should never be disposed of in the household rubbish. In

accordance with directive 2002/96/EC of the European Parliament and the

European Council from January 27, 2003 which addresses old electronic and

electrical devices, such devices must be disposed of at a designated collection

facility. At the end of its service life, please take your device to one of these

public collection facilities for proper disposal.

- 5 - PSDP 6200

2 general information

2.1 PaCking Contents

1 cassette PSDP 6200

2 RF cables

1 Brief assembly instructions 1 Measuring log

2.2 meaning of the symbols used

Important note

—> General note

• Performing works

2.3 teChniCal data

The devices meet the following EU directives:

2011/65/EU, 2014/30/EU, 2014/35/EU

The product fulfils the guidelines and standards for CE labelling (page 39).

Unless otherwise noted all values are specified as "typical".

RF input

Frequency range: ....................................................... 950 … 2150 MHz

Level range: ............................................................ 60 dBμV … 80 dBμV

Input impedance: ............................................................................ 75 Ω

Symbol rate: ................................................................1 … 45 Msymb/s

RF output

Channels: ..................................................... C2 … C69 (incl. S2 … S41)

Frequency range: ........................................ 48.25 MHz … 855.25 MHz

Standard: ......................................................................... CCIR PAL B/G

Output level: ............................................................................. 98 dBμV

Output level attenuation: ............................................................0 … 7 dB

Output impedance: .........................................................................75 Ω

Video interference level: .................................................................57 dB

Video band width: ......................................................... 20 Hz … 5 MHz

Audio interference level: ..............................................................> 50 dB

Audio band width: .........................................................40 Hz … 15 kHz

- 6 - PSDP 6200

Connections

SAT inputs: .............................................................................2 F sockets

RF output: ............................................................................1 IEC socket

Connection strip (10-pin): ..................for supply voltages and control circuits

RS 232 socket: ..................................... serial interface for software update

Conditional access:...............................1 (2 channels can be descrambled)

2.4 desCriPtion

The twin transmodulator cassette is a QPSK-converter, which converts all sta-

tions modulated according to DVB-S

and

QPSK

standard into two PAL-modulat-

ed cable signals.

The

cassette

has two digital SAT IF inputs and one RF output.

It is equipped with two channel strips. Each channel strip consists of a digital

tuner, a digital signal preparation unit and a modulator.

The

cassette

‘s channel

strips are indicated by

"Bx …A" or "Bx …B"

in the control unit display.

The channel strip "A" can descramble scrambled channels via a correspond-

ing CA module. Depending on the CA module and the smart card, two chan-

nels can be descrambled simultaneously with one CA module, with the second

one supplied via channel strip "B". Using the integrated time control you can

select alternate channels. The control of the

cassette

takes place via the control

unit of the head-end station.

Two LEDs provide an indication of the SAT IF input signal quality based on

their colour. Additionally the quality of the transport stream received is dis-

played ("CN…"). If the data of channel strip "A" are used in channel strip "B"

the status LED of channel strip "B" is switched off.

The prepared input signals reach the RF output collector of the head-end sta-

tion via the RF output socket. The common output level of the channel strips can

be set at the RF output collector of the head-end station.

When the head-end station is switched on, the two-line LC display briefly

shows the software version of the control unit. To operate this cassette the

software version of the control unit must be "V 45" or higher. You can find the

current operating software for the control unit and the cassette

the software

"BE-Flash"

and the current assembly instructions

on the website "www.gss.de".

The

cassette is

designed for use in the following head-end stations:

PSU 12, PSU 8-16 and PST 19-1.

- 7 - PSDP 6200

2.5 soft ware query

Control unit

If necessary, you can activate the indication of the software version of the

control unit manually:

• Press any two keys on the control unit of the head-end station simultaneously

until the display goes dark and afterwards

the software version, e.g. "

V 45

appears.

Cassette

After activating the cassette the software version of the cassette is displayed

(see page 17).

- 8 - PSDP 6200

3 assembly

3.1 installing the Casset te

– Ensure the head-end station is mounted so it will not be able to vibrate.

Avoid, for example, mounting the head-end station onto a lift shaft or any

other wall or floor construction that vibrates in a similar way.

– Before installing or changing a cassette unplug the power cable from the

mains power socket.

• Remove the fastening screws 1 of an unoccupied slot from the bracket of

the head-end station.

• Insert the cassette in this slot and push it into the housing.

• Align the cassette and apply slight pressure to connect it to the connections

of the board and the RF bus bar.

• Fasten the cassette with the screws 1.

- 9 - PSDP 6200

3.2 emC regulations

To comply with the current EMC regulations, it is necessary to connect the lines

leading in and out of the head-end station using cable terminals.

CLASS

KLASSE

The attenuation of shielding of the connection lines must meet the requirements

for "Class A".

When mounting the cassette in a head-end station which is installed in a 19"

cabinet, make sure the connections leading in and out for the 19" cabinet are

made using cable terminals.

• Insert the required number of cable terminals in the openings provided in

the head-end station or in the 19

cabinet.

—> Cable terminals are not included in the scope of delivery.

Tighten the nut on the cable terminal until the teeth on the lock washer have pen-

etrated the exterior coating and a good connection is made between the housing

and cable terminal.

- 10 - PSDP 6200

3.3 overview of the Casset te

1 Slot for a CA module

2 D-SUB socket "RS 232"

3 Status LED of the channel strip "A"

4 SAT IF input (channel strip "A")

5 Status LED of the channel strip "B"

6 SAT IF input (channel strip "B")

The operating software of the cassette can be updated via the

9-pin D-SUB socket "RS 232"

using a PC or notebook and

the software "BE-Flash". You can find the current operating soft-

ware on the website

"www.mygss.eu".

—> For PCs with USB connector (without serial interface), we recom-

mend the DeLOCK "USB 2.0 to Serial adapter" (Product No.

61460).

3.4 ConneCting the Casset te

• Connect the SAT IF input

(channel strip "

") and

SAT IF input

(chan-

nel strip "

") to the respective outputs of the SAT IF input distributor.

•

Connect the head-end station to the mains power supply.

Andere Handbücher für PSDP 6200

Inhaltsverzeichnis

Andere GSS Netzwerk-Hardware Handbücher

GSS

GSS PSDP 6200 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung